JLAB Fit Sport 3 Wireless Fitness Headphones User Manual
- June 6, 2024
- JLab
Table of Contents
We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.
| YOUR WARRANTY
All warranty claims are subject to JLab Audio authorization and at our sole
discretion. Retain your proof of purchase to ensure warranty coverage.
---|---
| CONTACT US
Reach out to us at support@jlabaudio.com
or visit jlabaudio.com/contact
---|---
REGISTER TODAY
jlabaudio.com/register
Product updates | How-to tips
FAQs & more
FIRST TIME SETUP: BLUETOOTH PAIRING
RECURRING USE
Once JLab Fit Sport 3 has initially paired to your device, the earbuds will
auto-connect to your Bluetooth device when powered back ON.
(Follow BUTTON FUNCTIONS instructions)
BUTTON FUNCTIONS
VOICE PROMPTS
“HELLO”
Power is ON.
“READY TO PAIR”
JLab BT earbuds are ready to connect to your Bluetooth device.
“YOU’RE CONNECTED”
JLab BT earbuds are connected to your Bluetooth device and ready for use.
“GOODBYE”
Power turning OFF.
CHARGING
FITTING
1 Choose ear tip size and optional Cush Fin. Try various ear tips to find the
best fit.| 2 Move the earbud to desired location from the Adjustable Tip
Placement.
---|---
|
3 Start from the back + rotate around the ear.| 4 Secure cable in front, back
- bottom.
|
CABLE CLIP USE
Attach the cable clip near the center of the cable.
Clip in the back or front position of shirt.
CONNECTION TROUBLESHOOTING
I DO NOT SEE JLAB BT IN MY DEVICE
1. Turn Bluetooth off and then back on in device settings.
2. If you still do not see JLab BT, repeat FIRST TIME SETUP: BLUETOOTH PAIRING directions.
JLAB BT DOES NOT RECONNECT TO MY DEVICE AFTER POWERING ON
In device settings, forget the JLab BT.| Turn Bluetooth off then back on in
device settings.| Repeat FIRST TIME SETUP: BLUETOOTH PAIRING directions.
---|---|---
| |
CONNECTION TROUBLESHOOTING (CONTINUED)
BLUETOOTH IS CONNECTING TO AN UNWANTED DEVICE
Note : The JLab BT can remember up to 8 devices. It will try to auto-
connect to last device used.
1. If you have more than one device that was connected to JLab BT, turn OFF Bluetooth on unwanted devices and turn ON Bluetooth on chosen device.
WARNING
Make sure USB door is closed and fastened.
This will protect against sweat and water damage.
Before charging, the Fit Sport 3 earbuds need to be fully dry.
If there is any exposure to moisture, the internal components may become
damaged.
It is best practice to air dry before charging.
CAUTIONS
- Avoid getting moisture or liquids into the tip of the earbuds or charging port.
- Avoid extreme heat, cold, and humidity.
- Avoid dropping or crushing the earbuds, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
- Wax may build up in the earbud tips, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
- If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
- If you experience regular discomfort while using this product, discontinue use and consult your physician.
- We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in safe location when not in use.
Shop products | Product alerts | Burn-in your headphones
JLab Audio + Burn-in Tool
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>