DENVER DSB-2010MK2 Soundbar User Manual

DENVER DSB-2010MK2 Soundbar User Manual

Soundbar User Manual
DENVER DSB-2010MK2

Safety information

Please read the safety instructions carefully before using the product for the first time and keep the instructions for future reference.

1. This product is not a toy. Keep it out of reach of children.

2. Keep product out of the reach of children and pets to avoid chewing and swallowing.

3. Product operating and storage temperature is from 0 degree Celsius to 40 degrees Celsius. Under and over this temperature might affect the function.

4. Never open the product. Touching the inside electrics can cause electric shock. Repairs or service should only be performed by qualified personnel.

5. Do not expose to heat, water, moisture, direct sunlight!

6. Please protect your ears against loud volume. Loud volume can damage your ears and risk in hearing loss.

7. Bluetooth wireless technology operates within a range of about 10 m (30 feet).
   The maximum communication distance may vary depending on the presence of obstacles (people, metal objects, walls, etc.) or the electromagnetic environment.

8. Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices.

9. The unit is not waterproof. If water or foreign objects enter the unit, it may result in fire or electric shock. If water or a foreign object enters the unit, stop use immediately.

10. Only charge with supplied Adaptor. The direct plug-in adapter is used as disconnect device, the disconnect device shall remain readily operable. So, make sure there is space around the power outlet for easy access.

11. Do not use non original accessories together with the product as this can make the product functionality abnormal.

What’s in the Box?

Connecting Your Sound Bar to Your TV or other sources:

Illustration of the Soundbar connectors for different connections:

Turn on your sound bar:

1. Connect the Power Supplies to Sound Bar then power Insert Power Supplies to an AC outlet.
2. Placing the Soundbar on a flat and solid surface. Hold the Power button / MODE at the right side of the sound bar or Press RED key on the remote control to turn it on. When the Soundbar is switched to standby, the red dot is turned on.

*NOTE: AUTO OFF Function of LINE IN: If the connected device plays for 60 minutes, the soundbar automatically turns to Standby to save power.**
Hold down /Mute to disable or enable AUTO OFF function of LINE IN.

Importance Notice for soundbar mounting on the wall:

1. Wall-mounted installation must be carried out by qualified personnel only. Incorrect assembly can result in severe personal injury and property damage! (If you intend to install this product yourself, you must check for installations such as electrical wiring and plumbing, which may be hidden inside or behind the wall.)
2. It is the installer’s responsibility to verify and confirm that the wall will safely support the total load of the unit and wall brackets.
3. Additional tools (not included) are required for the installation.
4. Do not overtighten screws.
5. Use an electronic stud finder to check the wall type before drilling and mounting
6. The proposed height on the wall is 1.0~1.5meters

The control panel on the Soundbar:

Remote control buttons

Technical Specifications

Power Supplies Information:

ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S

Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.

DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>