DENVER DSB-2010MK2 Portable Soundbar User Manual
- June 6, 2024
- Denver
Table of Contents
Soundbar
User Manual
DENVER DSB-2010MK2
Safety information
Please read the safety instructions carefully before using the product for the first time and keep the instructions for future reference.
-
This product is not a toy. Keep it out of reach of children.
-
Keep product out of the reach of children and pets to avoid chewing and swallowing.
-
Product operating and storage temperature is from 0 degrees Celsius to 40 degrees Celsius. Under and over this temperature might affect the function.
-
Never open the product. Touching the inside electrics can cause electric shock. Repairs or services should only be performed by qualified personnel.
-
Do not expose to heat, water, moisture, direct sunlight!
-
Please protect your ears against loud volume. Loud volume can damage your ears and risk in hearing loss.
-
Bluetooth wireless technology operates within a range of about 10 m (30 feet).
The maximum communication distance may vary depending on the presence of obstacles (people, metal objects, walls, etc.) or the electromagnetic environment. -
Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices.
-
The unit is not waterproof. If water or foreign objects enter the unit, it may result in fire or electric shock. If water or a foreign object enters the unit, stop use immediately.
-
Only charge with supplied Adaptor. The direct plug-in adapter is used as a disconnect device, the disconnect device shall remain readily operable. So, make sure there is space around the power outlet for easy access.
-
Do not use nonoriginal accessories together with the product as this can make the product functionality abnormal.
What’s in the Box?
Connecting Your Sound Bar to Your TV or other sources:
Illustration of the Soundbar connectors for different connections:
LINE IN | LINE IN (AUTO OFF Function*) |
---|---|
DC IN | DC IN |
Turn on your soundbar:
- Connect the Power Supplies to Sound Bar then power Insert Power Supplies to an AC outlet.
- Placing the Soundbar on a flat and solid surface. Hold the Power button /MODE at the right side of the soundbar or Press a RED key on the remote control to turn it on. When the Soundbar is switched to standby, the red dot is turned on.
NOTE *: AUTO OFF Function of LINE IN: If the connected device plays for
60 minutes, the soundbar automatically turns to Standby to save power.
Hold down /Mute to disable or enable AUTO-OFF function of LINE IN.
Importance Notice for soundbar mounting on the wall:
-
Wall-mounted installation must be carried out by qualified personnel only.
Incorrect assembly can result in severe personal injury and property damage! (If you intend to install this product yourself, you must check for installations such as electrical wiring and plumbing, which may be hidden inside or behind the wall.) -
It is the installer’s responsibility to verify and confirm that the wall will safely support the total load of the unit and wall brackets.
-
Additional tools (not included) are required for the installation.
-
Do not overtighten screws.
-
Use an electronic stud finder to check the wall type before drilling and mounting
-
The proposed height on the wall is 1.0~1.5meters
The control panel on the Soundbar:
Symbol | Operation |
---|---|
Hold | Press |
/MODE | Power On/ Standby |
Drive
/MUTE| disable or enable AUTO OFF *| Pause/Play (USB/Bluetooth Mode) Mute / No
Mute
VOL+ /| Volume up| Next USB Drive/Bluetooth Song
VOL- /| Volume down| Next USB Drive/Bluetooth Song.
Remote control buttons
DSB-2010MK2 IB20210531
| Switch the product on or to standby
---|---
| Mute or restore volume
EQ| Equalizer: EqO: Normal, Eql: Rock, Eq2: Pop, Eq3: Classic, Eq4:
Jazz, Eq5: Country
| Decrease volume
| Increase volume
| Skip to previous audio file during USB/BT play
| Pause or play USB/BT audio file
| Skip to next audio file during USB/BT play
| Repeat audio during USB play
MODE| Select an audio source *
*MODE (source) selection shown on the LED display.
| Line In source
---|---
| Bluetooth source
•Flashes if the Soundbar is not paired or connected to a Bluetooth device.
•Lights up if the Soundbar is paired.
| USB source when connecting to a USB drive
Technical Specifications
Power consumption: | 20 W |
---|---|
Max output power: | 28 W |
Bluetooth version: | 5 |
Operating frequency range: | 2402-2480Mhz |
Soundbar measurement: | 60cm x 6 cm x 6 cm |
Bluetooth name: | DSB-2010MK2 |
Power Supplies Information:
Manufacturer:| SHENZHEN FIT-POWER TECHNOLOGY CO., LTD.
Commercial registration number:| 91440300577672653M
Address:| 201, NO.7 RIFU ROAD, EAST DISTRICT, BAISHIXIA COMMUNITY, FUYONG,
BAOAN SHENZHEN
Trademark| FIT-POWER
Model:| TP04-120200E
Input voltage:| 100-240V~
Input AC frequency:| 50/60Hz
Output voltage:| DC12V
Output current:| 2.0A
Output power| 24W
Max output power:| 36W
Average active efficiency:| 87%
Efficiency at low load (10%):| 82%
No-load power consumption:| 0.1W or less
Please notice – All products are subject to change without any notice. We take
reservations for errors and omissions
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S
Electric and electronic equipment and included batteries contain materials,
components and substances that can be hazardous to your health and the
environment if the waste material (discarded electric and electronic equipment
and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the crossed-out
trash can symbol, seen above. This symbol signifies that electric and
electronic equipment and batteries should not be disposed of with other
household waste, but should be disposed of separately.
As the end-user, it is important that you submit your used batteries to the
appropriate and designated facility. In this manner, you make sure that the
batteries are recycled in accordance with the legislature and will not harm
the environment.
All cities have established collection points, where electric and electronic
equipment and batteries can either be submitted free of charge at recycling
stations and other collection sites, or be collected from the households.
Additional information is available at the technical department of your city.
Hereby, Inter Sales A/S declares that the radio equipment type DSB-2010MK2 is
in compliance with Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address:
www.denver-electronics.com and then click
the search ICON on the topline of the website. Write model number: DSB2010MK2.
Now enter the product page, and red directive is found under downloads/other
downloads.
Operating Frequency Range: 2402-2480Mhz
Max Output Power: 20 W
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics
DSB-2010MK2 IB20210531
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>