PHILIPS SPK7507 5000 Series Wireless Mouse User Guide

Mouse 5000 Series
SPK7507 User manual

SPK7507 5000 Series Wireless Mouse

Function overview of the mouse

1. Scroll wheel
2. Left and right buttons
3. Forward/backward side buttons
4. DPI button| 5. Low battery indicator
6. Wireless receiver
7. Optical sensor
8. ON/OFF switch
9. Battery door
---|---

Connection Guide

1. Push the battery door away.
2. Pull off the battery insulating film. Turn on the power switch.
3. Take out the receiver and close the battery door.
4.  Plug the receiver into the USB port of a PC.

Packaging contents

1. Wireless mouse
2. Wireless receiver
3. User manual/warranty card
4. 1*AA battery (inside mouse)

System requirement

1. 1 x USB port
2.  Windows ® 7,Windows  ® 8,Windows ® 10 or later, Android 3.2 and above; Mac OS 10.5 or later

Technical specifications

1. Connectivity：2.4GHz wireless
2. Working distance: about 15m
3. Number of buttons：6
4. Button lifespan: 3 million clicks
5. Resolution：800/1200/1600/2400/3200 DPI
6. Power supply: 1*AA Philips battery
7. Interface: USB wireless receiver
8. Product size ：117.2×74.8×39.3mm
9. Product weight ：97g ± 5g
10. Operating temperature range: 0 ° C to 40 ° C
11. Operating humidity range: 10% – 85%.

Trouble shooting

1. Make sure that the USB wireless receiver of the product is correctly plugged into the USB port of the computer.
2. Make sure the computer meets the minimum system requirement.
3. If the distance between the product and the receiver exceeds an effective range, please reduce the distance for better performance.
   If you can’t solve the problem, please try to find the solution from Philips website or nearest retailer. Please do not disassemble the product by force.

Attention

1. Photoelectric technology can correctly detect the movement of mouse on most surfaces. Do not use the mouse on any reflective, transparent or uneven surfaces.
2. Please use dry and soft cloth to clean the product.
3. Do not disassemble the product by force.
4. Do not direct the light from the bottom of the mouse to your eyes.
5. Do not get in the rain or in the sun or fire.
6. Do not flush directly with water.

Important safety and compliance information

Disposal of product and packing material
Waste Electrical and Electronic Equipment-WEEE
This symbol on the product or on its packaging indicates that this product must not be disposed of with your household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling or waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resource and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact the local city office, the household waste disposal service or the shop where you purchased the product.
CE Declaration of Conformity
This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directive (2014/30/EU), RoHS directive (2011/65/EU) and Radio Equipment Directive (2014/53/EU)( for Radio Equipment )
This product has been tested and found to comply with the harmonized standards for Information Technology Equipment, these harmonized standards published under Directives of Official Journal of the European Union.
Federal Communications Commission (FCC) Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE – CAUSING EQUIPMENT REGULATIONS.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

**Warranty Card

**

Dear customer,
Thank you for purchasing a Philips IT accessory product. To ensure you a reliable after-sales service, please read the following instructions carefully. This product warranty period is valid for one year from the date of purchase (the date of receipt of the return receipt and the invoice date of the buyer).
Register your product and get support at : www.philips.com/welcome
The following situations are not covered by after-sales service :

1. Unable to provide a valid warranty card and invoice (not including those that can prove the products is within the valid warranty period) or the alteration of the warranty without authorization.
2. The product model and serial number on the warranty card are not in conformity with the physical product or without the distributor seal.
3. The model number, serial number or production date code on the product has been altered, removed or made illegible.
4. The defect is the result of excessive use outside the intended purpose, e.g. non-stop use in a commercial environment.
5. Damage due to not used in accordance with product instructions.
6. Damage caused by the use of pirated software or computer virus during use.
7. Damage caused by accident, damage, or repair from unauthorized service vendors.
8. Damage caused by force majeure.
9. The product does not work properly due to missing connection caused by accident, signal interference or other influential factors during use.
10. For normal wear and tear defects, or by their nature consumable parts.
11. The product does not function properly because it was not originally designed, manufactured or approved for use in the country where you use the product, which might occur when you imported the product. If the functions of the product which you had purchased are defected or can not be used normally, please contact your local retailer or contact: Email: India.Callcentre@tpv-tech.com Hotline service: 1800 425 6396 Opening hours: 10 a.m. to 9 p.m. from Monday to Saturday & 10 a.m. to 6 p.m. on Sunday. The serial number of the product filled in the form must be consistent with the actual product. This certificate the primary instrument for the after-sales service, please safe keep it. If you need technical support, please show this warranty card, and we will provide quality and professional services.

Commodity
Information| Name|
---|---|---
Place of origin|
Model No.|
Serial No.|
User info.| Name|
Address|
Tel.|
Postcode|
Sales info.| Retailer|
Address|
Tel.|
Postcode|
Sale date|
Invoice No.|
Stamp 8. Signature|
Deer customer. theatove Inforrnabonisto be filleclin by the seller. ReasecoopeaterAthuslhankyou! The following infonnaWn shad be filled in by the maintenance agexyand retumedo,thecustcrner.
Maintenance info.| Maintenance company name|
Address|
Tel.|
Postcode|
Document No.|
Date|
Signature|

2022 © Top Victory Investments Limited . All rights reserved.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Limited , and Top Victory Investments Limited is the warrantor in relation to this product.

Specifications are subject to change without notice
Made in China
Register your product and get support at: www.philips.com/welcome

References

• Product registration | Philips

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>