Fender Teufel ROCKSTER GO 2 Bluetooth Speaker Instruction Manual

: May 15, 2024
: Fender Teufel

Table of Contents

Fender Teufel ROCKSTER GO 2 Bluetooth Speaker
Product Usage Instructions
FAQs
Portable Bluetooth Speaker with lithium battery
FCC statement
CONTACTS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Fender Teufel ROCKSTER GO 2 Bluetooth Speaker

Fender-Teufel-ROCKSTER-GO-2-Bluetooth-Speaker-product

Specifications

Dimensions : 210 mm x 108 mm x 62.5 mm
Weight : 375 g
Power Output : 2.5 – 13.5 W
Input Voltage : 5 V, max. 3 A
IP Rating : IPX7

Product Usage Instructions

Charging

To charge the device, use a compatible charger with an output of b5V and a maximum of 3A. Connect the charging cable to the device and a power source. The charging indicator will show the status of the battery.

Bluetooth Connectivity

1. Turn on the device by pressing the power button.

2. Enable Bluetooth on your smartphone or other compatible device.

3. Search for available Bluetooth devices and select “ROCKSTAR GO 2” to pair.

Volume and Track Control

Use the volume buttons to adjust the sound output. Press the track buttons to skip to the next or previous track when playing music.

Party Link Feature

The Party Link feature allows you to connect multiple devices for synchronized music playback. Follow the device instructions to set up Party Link mode.

FAQs

Q: What do I do if the device is not pairing via Bluetooth?
- A : Make sure the device is in pairing mode, check if Bluetooth is enabled on your device, and ensure they are within close proximity. Restart both devices if needed.
Q: How do I clean the device?
- A : Use a soft, dry cloth to clean the exterior of the device. Avoid using liquids or abrasive cleaners that may damage the surface.
Q: What is the IPX7 rating for the device?
- A : The IPX7 rating means the device is protected against immersion in water up to 1 meter for up to 30 minutes.

Portable Bluetooth Speaker with lithium battery

Fender-Teufel-ROCKSTER-GO-2-Bluetooth-Speaker-fig1

Fender-Teufel-ROCKSTER-GO-2-Bluetooth-Speaker-fig2 Charging

Fender-Teufel-ROCKSTER-GO-2-Bluetooth-Speaker-fig3

Bluetooth® connection

Volume and playback

Fender-Teufel-ROCKSTER-GO-2-Bluetooth-Speaker-fig7

ARTY LINK

Fender-Teufel-ROCKSTER-GO-2-Bluetooth-Speaker-fig9

Technical data

Fender-Teufel-ROCKSTER-GO-2-Bluetooth-Speaker-fig11

Trademarks

© All trademarks and brand names are the property of their respective owners. Bluetooth® is a registered trademark of the Bluetooth SIG, Inc.
Qualcomm® aptX™ and Qualcomm® aptX™ HD are products of Qualcomm Technologies International, Ltd.

Qualcomm® is a trademark of Qualcomm Incorporated, registered in the U.S. and other countries.
aptX™ is a trademark of Qualcomm Technologies International, Ltd. registered in the U.S. and other countries.

Other trademarks and trade names are those of their respective owners.

FCC statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

```
* Reorient or relocate the receiving antenna.
```
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.

Hereby, Lautsprecher Teufel GmbH declares that the radio equipment type FENDER x TEUFEL ROCKSTER GO 2 is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of conformity is available at the following internet address:

http://www.teufelaudio.com/declaration-of-conformity

CONTACTS

Teufel Audio US, Inc.

16192 Coastal Highway Lewes, Delaware 19958 USA

Lautsprecher Teufel GmbH
Budapester Str. 44 10787 Berlin Germany

Phone/Telefon

International 0800 200 300 40 (toll- free)
Deutschland +49 (0)30 217 84 217
Österreich +43 12 05 22 3
Schweiz +41 43 50 84 08 3

Online-Support

Contact/Kontakformular

us.teufelaudio.com/contact
teufelaudio.com/contact
teufel.de/kontakt

Warranty

http://us.teufelaudio.com/warranty

manuals.teufelaudio.com

Scope of delivery

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual >>