Netatmo Additional Smart Radiator Valve Installation Guide
- June 6, 2024
- Netatmo
Table of Contents
Additional Smart
Radiator Valve
Quick installation guide
Additional Smart Radiator Valve
You can watch an installation tutorial video online at the following address: https://addvalve.netatmo.com
Read these instructions carefully before starting the installation.
The device is for indoor use only and must be protected from dampness and dust
as well as solar radiation.
In the box
- One Smart Radiator Valve Giacomini
- One set of 2 AA batteries
- One set of color adhesives
- One set of radiator adaptors and accessories
Compatibility
There are two types of radiator valves: manual valves (1), and thermostatic
valves (2).
Thermostatic valves (usually with numbered graduation marks from 1 to 5) can
be easily replaced with the Netatmo Valve.
Note: If your installation also includes manual valves you can leave them
as they are or call a professional to replace them.
Application
Before inserting the batteries into your valves, download the mobile
application Energy Netatmo.
To find out how to remotely control your Valves from your smartphone or
tablet, go to: https://valve.netatmo.com
Batteries
Follow the steps below, only when required in the application
1. Open the front panel of the Valve using a small anti-clockwise rotation.
2. Open the metal battery cover.
3. Insert the batteries ensuring the positive and negative ends correspond.
4. Close the metal battery cover and replace the front panel.
Customization
You can customize each Valve using one of the color adhesives provided.
Installation
Removing the old valve
Rotate the valve counter-clockwise to remove it from the radiator (1).
Unscrew the securing ring (2) and remove the valve.
Radiator Adaptors
Use the adaptor selection guide provided to choose the adaptor that fits onto your radiator valve body. For more help, you can use our online compatibility tool at: https://check.netatmo.com
Valve installation
Valve installation
Fit the suitable adaptor (1) onto the valve body. Then, screw the Netatmo
Valve onto the adaptor (2) while turning it to ensure the display faces the
right direction. Do not use a wrench.
Test
The display shows the room temperature (1). To increase/ decrease the temperature setpoint on the Valve, twist the cylinder clockwise/anticlockwise. The manual setpoint is temporarily displayed on a black background (2).
Installation advice
Installation advice
Do not block air ventilation next to the Valve (curtain, radiator cover…)
Do not cover.
Technical specification
SIZE
Valve: 58 mm (diameter), 80 mm (L)
WEIGHT
Valve: 186 g (including batteries)
DESIGN
Designed by Starck
SENSORS AND MEASUREMENTS
Temperature (measurement): Range: 0°C to 50°C
Accuracy: +/- 0.5°C
Temperature (setpoint):
Range: 5°C to 30°C
Increment: 0.5°C
Motor:
Linear motion: 8 mm max
Noise level: < 35 dBA
Spring force: 80 N max
E-PAPER DISPLAY
Energy-efficient, longer battery life, and optimal readability.
FREE APP, LIFETIME SUPPORT
No subscription fee. The app is available on the App Store and on Google Play.
Free access to your online personal dashboard. Accessible from multiple
devices.
WIRELESS SPECIFICATIONS
Wireless connection between Valves and Relay: long-range radio (868.9-869.1,
869.7-869.9 MHz @16mW).
POWER AND BATTERIES ( PER VALVE)
Two 1.5V AA batteries.
Two-year battery life.
SETUP AND COMPATIBILITY ( PER VALVE)
6 radiator adaptors suitable for use with the following valve bodies: M30x1.5,
M30x1.0, M28x1.5, Danfoss RAVL, Danfoss
RA, Giacomini.
SAFETY WARNINGS
This device must be installed according to the applicable norms. Use only with
a supplied power plug adaptor. This device is for indoor use only. Before
inserting the batteries, check that the contacts in the device and on the
batteries are clean, is necessary to clean them. Note the polarity (+/-) when
inserting the batteries. Do not throw the batteries into a fire, short-circuit
them or dismantle them. Keep children away from batteries. Seek medical
attention immediately if a battery is swallowed. Do not attempt to repair the
device yourself; customer service is available. Any changes or modifications
to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge unless they have been given supervision or instruction concerning
the use of the appliance by a person responsible for their safety. Children
should be supervised to ensure that they do not play with the appliance.
EU Declaration of Conformity
– Hereby, Netatmo declares that this NRV01 is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/UE and ROHS
2011/65/EC.
The original EU declaration of conformity may be found at
http://www.netatmo.com/declaration/nav.
Netatmo SAS – 73/77 rue de Sèvres – 92100 Boulogne-Billancourt
Boulogne-Billancourt, 12/06/2017
CEOPOTTER
Notes
CE marking is the manufacturer’s declaration that the product meets the requirements of the applicable EC directives.
WEEE symbol designates safe and responsible collection, recycling, and
recovery procedures for all types of electronic waste.
Recycling universal recycling symbol
M/N: Model number
M/N: NRV01
Copyright Netatmo © 2020 All rights reserved. Reproduction and distribution
are prohibited without written authorization from Netatmo. Apple and the Apple
logo are trademarks of Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc., registered in the U.S. and other
countries. HomeKit is a trademark of Apple Inc. Google Play and Google Play
logo are trademarks of Google LLC.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>