V-TAC VT-2428 Infrared Controller Instruction Manual
- June 4, 2024
- V TAC
Table of Contents
V-TAC VT-2428 Infrared Controller
TECHNICAL DATA:
| Model | VT-2428 |
|---|---|
| Output | 5 Channels |
| Output Current | < 10A |
| Output Power | 120V/240W |
| Supply Voltage | DC: 12V/24V |
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the
best. Please read these instruc-tions carefully before starting the
installation and keep this manual handy for future reference. If you have any
another query, please contact our dealer or local vendor from whom you have
purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 2 years from the date of purchase. The warranty does
not apply to damage caused by incorrect installation or abnormal wear and
tear. The company gives no warranty against damage to any surface due to
incorrect removal and installation of the product. The products are suitable
for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would
void the warranty. This product is warranted for manufacturing defects only.
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a certified person.
- This marking indicates that this product should not be disposed of with other household wastes.
- Caution, risk of electric shock.
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.
KEY FUNCTIONS ARE AS FOLLOWS：
Color temperature
brightness+
| Color temperature
brightness+-
| white| Warm colors
---|---|---|---
Static brightness+ Dynamic speed +| Static brightness – Dynamic speed –| Turn
off| Turn on
Static red| Static green| Static blue| white（RGB
Combination）
Static rose| Static dark green| Static Sapphire
blue
| 7 colors jump
changing
Static orange| Static Turquoise
blue
| Static purple gray| 7 colors breath
changing
Static goose yellow| Static sky blue| Static dark reddish purple| 7 color fade
changing
Static yellow| Static cyan| Static purple| Twinkle Flash
CONNECTION DIAGRAM:
Note: Connect the load first and then the power on; Ensure that there is no short circuit between wires connection before power on
NOTES:
- The power supply voltage of this product is DC12-24V and shall not be connected to other voltages.
- The outgoing line shall be correctly wired according to the color and label provided in the wiring diagram.
- This product should not be overloaded.
SUPPORT CENTER
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>