Klim K90 Mistral Laptop Cooling Pad User Guide
- June 6, 2024
- KLIM
Table of Contents
MISTRAL
QUICK GUIDE
THANK YOU!
Thank you for acquiring our KLIM Mistral laptop cooler! We hope that you enjoy this product and that it helps you keep your laptop at an optimal temperature. Please read this guide carefully and ensure all components are installed correctly for maximum performance. If you need any help or if you simply want to share your feedback, please contact us at support@klimtechnologies.com. Our specialists will reply within 24 hours!
Heat shields
If your laptop’s exhausts are located at the back, stick the deflectors above the air intake as shown in the picture. If your laptop does not have rear exhausts, skip this step.
Frontal tabs
Take the frontal tabs and insert them in the holes to keep the laptop in place while in a tilted position. There are five slots available to choose from.
Inclination
Select the desired inclination by inserting the support tab in one of the leg sockets. Note: Do not place the support tab directly on the table as this may damage the tab or scratch the surface.
Rubber ring
The KLIM Mistral comes equipped with a small rubber ring to help seal the laptop and dissipate heat. If you are using a large laptop, remove the small ring and replace it with the big one by inserting it in the rectangular grooves.
Connection
Place the laptop on top of the cooling pad and connect both devices using the supplied USB cable. An extra port is provided to plug in other peripherals, such as a keyboard or mouse.
Controls
Use the control buttons to operate the cooler: a) ON/OFF: turn the laptop cooler on and off. b) LED: change the lighting color. Press and hold to switch the lighting off. c) SPEED: change the fan speed (3 levels).
CONTACT
Do you need help with your product? Want to share something with us? We’d love to hear from you! Our specialists are available 24/7 so do not hesitate to reach out. support@klimtechnologies.com
Marcus Excelsior Limited
2512 Longhorn Place Office Tower
8 Argyle Street, Mongkok, Kowloon
Hong Kong
Authorized EU representative Marcus Excelsior Limited
Bracken Road No 51, Carlisle Offices
018CV48 Dublin, Sandyford
Dublin, Ireland