ToSee 2C-30B/2C-30W Guardian WiFi Video Doorbell User Guide
- June 6, 2024
- ToSee
Table of Contents
DETECT CONNECT PROTECT
GUARDIAN
Quick Guide
Application Download
Search “Smart Life” in your mobile app store, (Google Play for Android or App Store for IOS)
Follow the app instructions to set up the device or refer to the enclosed Smart Life App User Manual included within your doorbell packaging.
2C-30B | 2C-30W
WHAT’S INCLUDED
1 x Wi-Fi Video Doorbell
1 x USB Charging Cord
1 x 32GB Micro SD Card Built-In
2 x Rechargeable Batteries
1 x Wall mount
User Manuals
Mounting Screws
1 x Installation Tool
Device Requirements
Android 4.1 or higher
iOS 8.0 or higher
Please Note
Remove both (2) green battery terminal protectors from the base of each battery.
Fully charge GUARDIAN doorbell prior to installing – use USB charging port located behind the battery plate.
Charging Time – 7 hours using 1AMP USB (via the doorbell micro USB port)
Please fully charge the 18650 batteries before use.
With normal use, batteries will last between 5 to 6 months.
Note:
If the doorbell captures an excessive number of events every day, this will
consume the battery faster and will require more frequent charging. The use of
Live View to check and speak through your doorbell will also increase your
charge consumption rate. To reduce this you can changes your motion settings
to a lower sensitivity.
WARNING
Be sure to put 18650 batteries incorrect direction. Inserting batteries
incorrectly can cause damage
Note: Remove green terminal protectors from base of each battery.
Installation
| Indicator light flashing BLUE The device is waiting to begin pairing.
---|---
| Indicator light flashing RED The Wi-Fi connection has failed.
| Indicator light flashing BLUE and RED The Wi-Fi is disconnected.
Installation
Place the mounting plate in position and mark fixing holes with a marker, drill holes using a 6mm masonry drill bit and insert wall plugs.
Place the mounting plate in place using fixings enclosed and attach to wall.
Insert doorbell onto mounting plate and slide down to fix in place.
Step 1
Remove the back bracket
Step 2
Use 2 mounting screws to fix the back bracket onto your door or wall. You can
also use double-sided tape to fix the back bracket
Step 3
Fit the doorbell into the back bracket. Use the provided security screw to
secure the doorbell so the doorbell cannot be removed easily.
Notice
Please check live preview to find the best height to install your doorbell. We
recommend not below shoulder height.
Pairing of Chime
Connect the video doorbell to the doorbell chime and get an instant alert in
your home when someone rings the doorbell. Hear the doorbell chime when you
are at home
without checking the video doorbell app! The chime plugs into any wall outlet
so you can place it anywhere in your home.
The video doorbell is only compatible with our wireless chime and will not
work with other traditional doorbell chimes. The wireless chime is optional.
If the wireless chime is not installed notifications will go directly to the
Smart Life app.
Overview of the Wireless Chime
Pairing of Chime
Getting Started
Set up your chime with the video doorbell.
Step 1
Before the setup process, be sure your video doorbell has connected to your
phone and plug in your chime.
Pairing of Chime
Step 4
Press the Call Button within 5 seconds.
Step 5
Press the Call Button again, the chime will automatically play the tune you
selected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>