DENVER IOB-207 Wi-Fi IP Outdoor Smart Camera Instruction Manual

DENVER IOB-207
WI-Fl IP OUTDOOR SMART CAMERA
facebook.com/denverelectronics

U ser’s Guide for Battery WiFi Camera

Quick Start Guide for Battery Smart Camera

Perform the in-app Setup
The app is available for iOS, Android
The app name is “Denver smart home”

https://smartapp.tuya.com/denversmartliving

Account Registration and Login

Please open the “DENVER SMART HOME” App, and enter the App main interface. New users need to register by Email or Mobile number, click “Register”.

Please login directly if you already have an account.
To input, your account and password, click “Log in”.

Add Device

Tap + or “Add Device” to add the device.
Find the smart camera in the video surveillance list and click it

Note: The “auto scan” function cannot be supported, please select “Add Manually” and follow up below steps to add the device.
Confirm the red and blue LED flash alternately or a prompt tone is heard.
Connect with your home Wi-Fi. 2.4GHz signal type Wi-Fi is required, a 5GHz Wi- Fi network can not be used.
Pairing the camera. The camera lens is aimed at the QR code on the phone screen with a distance of 15cm. It will sound “beep” after the camera recognizes the QR code.

Note: Allow to access your location if prompted to enable the GPS.

Please click “I Hear a prompt” if you heard it, they will start connecting. The camera is added successfully. You can enter the live video interface.
Settings
Click to enter the Settings page. There are only a few settings to make, so the process is quick and easy. To start setting up your camera.

Product Features

| 4 size AA specification batteries work regularly for 2 to 3 months
---|---
| FHD Megapixels collocated with a wide-angle lens
| Support fast remote wake-up from mobile phones within 5 seconds
| 2.4G Wi-Fi connection
| Support PIR motion detection, when someone hovers at the door. it will send push alerts to your mobile phone immediately
| With IR-cut, it can switch automatically and the photos or videos shot by the camera are clearly visible both day and night to keep your home and family safe.

Product Specification Sheet

Working 200mA
Battery| 4 size AA batteries
USB| DC 5 V
Wi-Fi distance| 70 meters (open space without obstacle) or 15 meters (indoor)
Video Compression| H.264
Voice Intercom| Two-way audio with noise cancellation
Video resolution| 1920 * 1080@15 fps
Notification| Within 5 seconds
Device Wakeup Time| Within 5 seconds
Working Temperature| -10 ~ 50 °C
Storage Temperature| -20 ~ 60 °C

Product Design

Picture 1

1. Lens
2. LED
3. Light sensor
4. Motion detection sensor
5. Mic
6. USB interface
7. Speaker

Picture 1

8. Flip Switch
9. AA Battery
10. Power Switch
11. Mirco-SD card
12. Reset button

Step 1: Install anchors into a stucco, brick or concrete surface. Use the drill bit to drill one hole in your wall and install the anchors. Install the base bracket on the wall.

Step 2: Please turn the flip switch to “OPEN” and open the cover, then install four pcs AA batteries in it. (Please make sure that the polarity of the battery is correct.) Then put the power switch to “ON” and press the RESET button for 5 seconds. When blue lights light on, the red lights flash slowly, the device is ready to connect to the network. Refer
to picture 2.
Step 3: Align the device to the base bracket and hold it, then adjust the appropriate angle, the installation is finished

1. The USB interface is only used for the power supply.
2. When the mobile phone is connected to the home WiFi router, the mobile APP can generate a QR code that includes the name and password of the WiFi router. The product recognizes the QR code through the lens on the product, and the product is automatically connected to the router and server after identification. At this time, the APP also finds the product through the server, and the APP can control the operation of the product through the network.

If there is no WiFi signal, the product can still be triggered to record with the motion detection signal and the video file can be viewed through the APP when the WiFi is restored.

Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.

ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S

www.denver-electronics.com

Electric and electronic equipment contains materials, components, and substances that can be hazardous to your health and the environment if the waste material (discarded electric and electronic equipment) is not handled correctly.
Electric and electronic equipment is marked with the crossed-out trash can symbol, seen above. This symbol signifies that electric and electronic equipment should not be disposed of with other household waste, but should be disposed of separately.

All cities have established collection points, where electric and electronic equipment can either be submitted free of charge at recycling stations and other collection sites or be collected from households. Additional information is available at the technical department of your city.

Hereby, Inter Sales A/S declares that the radio equipment type IOB-207 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.denverelectronics.com and then click the search ICON on a topline of website. Write model number: IOB-207. Now enter the product page, and a red directive is found under downloads/other downloads.
Operating Frequency Range:2412MHz-2472MHz
Max Output Power:19db

DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>