SILVERGEAR 1035 Bluetooth Wireless Headphones User Manual
- June 5, 2024
- SILVERGEAR
Table of Contents
SILVERGEAR 1035 Bluetooth Wireless Headphones User Manual
Thank you for purchasing the Silvergear Wireless Headphone. This manual will provide instructions for effective and safe use of the device. Please read it carefully before use and store the manual in a safe place for future reference.
Technical data
Bluetooth: V4.0
Wireless working range: 10m
Distortion factor: <1%
SNR: >95dB
Radio frequency: 87.5-108MHz
Frequency range: 2.401-2.480GHz
Frequency response: 20Hz-20KHz
Supports TF cards: 128MB-32GB
Charging voltage: Micro USB 5V
Working current: 25-40mA
Output power: 2*20mW
Normal working time: up to 4 hours
Charging time: less than 2 hours
Description of parts
-
Power switch Turn the headphone ON. It will automatically enter into wireless mode. The indicator light flashes red and blue.
-
Mode button (M) Short press: switch between radio, Bluetooth and TF card mode.
-
- Music: Short press to play and pause music.
- Answering calls: Short press to answer a call or to hang up. Long press to decline calls. Press two times to redial the previous number.
- FM radio: Short press for an automatic search and store the radio station.
-
/V+
Short press: play the next song or select the next saved radio station Long press: turn the volume UP in any mode. -
/ V-
Short press: play the previous song or select the previous saved radio station
Long press: turn the volume DOWN in any mode. -
TF card slot
-
Microphone
-
Audio input
-
Indicator light
-
Micro USB charging port. Connect the USB charging cable to a computer or a power adapter to charge.
Operation
Charging
Insert the micro USB cable in a USB port to charge. The indicator light will
flash red when charging and turns off when the headphone is fully charged.
Low battery
When the battery is low you will hear ‘Low battery please charge’ and the
headphone will automatically turn off. If the headphones are not used for a
long period of time, charge at least once a month to extend the battery life.
Auto power off
If not connected in wireless mode, the headphones will turn off automatically
after 5 minutes.
Wireless pairing
The headphone supports pairing with wireless devices such as mobile phones,
tablets and TVs. – The indicator light flashes red and blue in Bluetooth mode
when it is pairing. Search for ‘Silvergear Headphone’ on your device. When
pairing is successful you will hear a sound and the indicator light will turn
blue.
Play music with cable
Insert the 3.5mm audio jack into the audio input port. The wireless connection
automatically turns off to save battery power.
Disposal
The crossed out wheelie bin symbol on this product is to remind you that electrical products should not be disposed of with household waste. Please dispose of it responsibly at an approved waste or recycling facility. Check with your local authority for recycling advice.
Quality Gear For Everyone
KARSTEN
INTERNATIONAL
art. no.: 1035
batch no.: 210518
Overschiestraat 63
1062 XD Amsterdam
The Netherlands
info@silvergear.nl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>