Pioneer VSX-LX305 Elite 9.2 Channel Network AV Receiver Installation Guide
- June 6, 2024
- Pioneer
Table of Contents
Pioneer VSX-LX305 Elite 9.2 Channel Network AV Receiver
https://jp.pioneer-audiovisual.com/manual/vsxlx305elite/top.pdf
This document uses a 7.1 channel system as an example when describing use. Refer to the online instruction manual when using other than a 7.1 channel system. There are also descriptions for using the multi-zone feature and other detailed operating instructions.
BOX CONTENT
Initial Setup Guide
STEP 1
Connect speakers with 4 Ω to 16 Ω impedance. Twist the ends of the speaker
cable wires tightly.
STEP 2
Be sure to insert the HDMI cable all the way in.
STEP 3
Switch the input on the TV to that assigned to the unit.
Troubleshooting
Try restarting the unit. Switch this unit to standby, then do 1. If the problem is not fixed, try the following:
- Unplugging the power cord and HDMI cables then replugging them in again
- Initializing the settings (do 2 while this unit is ON)
- Updating the firmware
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>