Ducky One 3 SF Grand Debut User Manual

Ducky One 3 SF Grand Debut User Manual

Specification :

• Type: Mechanical keyboard
• LED: RGB colour LED
• Keycap material: PBT or ABS
• Printing method: Double-shot or Laser Engrave
• Origin of Production: Taiwan
• Size:335 x 110 x 40 mm
• Weight:700g

Features :

• Hot-swappable Kailh sockets
• Various RGB LED lighting modes
• True USB Type-C interface, compatible with all Type-C devices
• Provides mouse functions for a convenient experience
• Miniature yet packed with features
• Supports Ducky Macro through hardware, personalize functions as you like
• Products with PBT Double-shot Seamless keycaps, providing the perfectly exceptional typing experience

Keyboard configuration diagram, Standard Layer

Keyboard configuration diagram Fn Layer

Keyboard configuration diagram Fn + Alt Layer

RGB Backlit Modes

• All above modes can be adjusted with the following key sequence: Fn + Alt + /Decrease speed Fn + Alt + ,Increase speed
• Hold Fn + Alt + T for 3 seconds to turn off all backlit (including CM1 and CM2).
• Only the backlit modes with can be adjusted using the following:
  ♦ Fn + Alt + Z Adjust colour red (R) brightness. 10 Levels.
  ♦ Fn + Alt + X Adjust colour green (G) brightness. 10 Levels.
  ♦ Fn + Alt + C Adjust colour blue (B) brightness. 10 Levels.
  ♦ Fn + Alt + V Erase red, green and blue colour setting.
  ♦ Fn + Alt + Spacebar (Colour palette)Activate colour palette to display various colours on each key, press on the desired colour, all the keys will automatically change to match.

RGB LED Zone Customization Modes

Recording steps:

• Adjust to the colour first, then set the individual keys to be set to that colour.

1. Press Fn + Alt + Caps Lock for 3 seconds, the buttons G (CM1) and B (CM2) will illuminate then press G to set CM1 and press B to set CM2.
2. When starting recording mode, Caps Lock will display the current LED colour. The colour can be adjusted by hitting Caps Lock + Z / X / C / V. After setting the desired colour, hitting any key on the keyboard will set that key to the selected colour.
3. Repeating the above steps allows the user to set different colours to different keys. If the key has been set, press again to cancel the setting.
4. To finish recording, press Caps Lock + Left Shift (REC over) to finish recording. The colour of the Caps Lock key is the value you set.

Note:

• When starting recording mode, Caps Lock will display the current LED Colour.
• CM1CM2 can work with other LED light modes at the same time.CM1 and CM2 can be turned on along with other lighting modes. In addition, CM1 has the priority over CM2 when the zone overlaps. Press Fn + Alt + T for 3 seconds to turn off ALL backlit modes.
• If there is no activity in 30 seconds in the recording mode, the recording session will terminate without saving.
• Caps Lock LED colour follows the “100% Full Backlit mode” .

Multimedia Function

Debounce Time Setting

Note:
The method is to adjust the Debounce time of the metal shrapnel in the mechanical shaft during the pressing process. The shorter the time, the sooner it can be triggered, but if the time is too short may cause misjudgement. If it’s not necessary to change the time, the default value is recommended.

Display Mode

Hold Fn + R_Alt + R_Ctrl for 3 sec

• To display various LED backlit modes The entire keyboard will be disabled while cycling through various RGB modes.
• Unplug the keyboard to quit Display Mode.
  Note: Used for showcasing purposes.

Reset To Factory Defaults

Note:
Hold for 3 seconds. The keyboard’s backlight will flash 3 times to indicate the keyboard has been reset.

Enable/Disable Windows Function (Windows Key Lock)

Fn+ any Alt key + Left Windows key for 3 seconds, the keyboard’s backlit will flash 3times to indicate the keyboard has been enabled/disabled.

Key Switch Functions

Key Switch Function

1. Applicable keys: Fn/Alt/Ctrl/Windows/Caps lock
2. Operation:

• Press Fn + Alt + k for 5 seconds.
• Until the ESC, L_Ctrl, L_Win, L_Alt, R_Alt, Fn, R_Ctrl, and Caps lock keys are all lighting up. The colourways are respectively pink, red, orange, yellow, green, blue, and purple.
• Except for Caps lock key, the rest of 6 keys are able to switch each function and colour at will. (2 keys max at the same time)
• Pressing Caps lock once will change it to FN.
• Pressing Caps lock twice will change it to L-Ctrl.
• Press Esc key once to finish the switching function.
• Press Caps lock again to resume Caps lock.
  Note: You can press Esc key to leave the switching function before starting it.

DIP Switch Functions

Note : You can input the ideal VID in both situation, but the VID can be only changed when DIP 3 turned on.

Ducky One 3 SF Macro

Step 1. Profile selections

Note:

• When keyboard is plugged in, Caps Lock and Number Keys will blink based on selected prole number.
• Adjust profile to 2~6 in order to set Macro.
• After profile is switched, Caps Lock or Indicator light will blink based on the current profile number.

Step2. To start Macro recording
Lock or Indicator light will blink based on the current profile number.
Press Fn + Alt + Tab for 3 seconds to start Macro recording. Once in recording mode the Caps Lock or indicator lights will flash slowly.

Step3. Press a key to start recording Macro
Press on the key you want to use to activate Macro. The key pressed will blink (Non-backlit version will not) and the Caps Lock or indicator lights will flash swiftly.

Step4. Recording Macro
Enter any key, and choose the Macro implementation and record time option.

Step5. To continue recording another key (Jump out the current recording file) Press Fn + Alt to choose another key to continue recording.

Step6. Finish recording
Press Fn + Alt + Tab for 1 second to finish recording and back to the profile.

Ducky One 3 SF Macro Hotkeys Function

Fn + Alt
Press for 1 sec to finish recording the current key and choose another key to record.

Ducky One 3 SF Macro Setting Section

Ducky SF Macro Configurable Keyboard Layer

• Standard Layer
• Fn Layer
• Fn + Alt Layer

Ducky SF Macro Unsittable Key

• Fn
• Caps Lock

Note:

• The Default supports outputting 4 Macro profiles at most simultaneously. That is, when the first profile is being executed, if the other Macro keys are pressed, the second profile will be input at the same time.
• Support N keys recorded at the same time, and N keys recorded at the same time when outputting.
• Macro function will be based on the user’s typing speed and record it.

Ducky One 3 SF Macro Multimedia Function Keys

Ducky One 3 SF Macro Keyboard Button Function Keys

Note: Need to be recorded first before use.

Ducky One 3 SF Macro Windows Common Function Keys

http://windows.microsoft.com/en-us/windows/keyboard-shortcuts

Ducky One 3 SF Macro Set Up Example

Note: Set the profile to profile 2~6 before setting Macro.

Hot-swap

Set-up Example

DISCLAIMERS

• When using a Hot-swap model, make sure to support the hot swap socket with your finger when inserting the switch to ensure it does not damage the PCB from excessive force.
• Any liquid damage to the keyboard will void warranty.
• Modifications to the keyboard will void warranty.

Warranty is 1 year from date of purchase via our Official Vendors https://www.duckychannel.com.tw/en/location/global
Please contact the vendor you purchased from for RMA procedures.

www.duckychannel.com.tw

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>