NITECORE UCN2 PRO QC USB Travel Charger User Guide
- June 6, 2024
- Nitecore
Table of Contents
NITECORE UCN2 PRO QC USB Travel Charger
Travel Charger
- Dual Slot Battery Charger
- QC 2.0 Available
- Real-time LCD Display
Warranty Details
Our authorized dealers and distributors are responsible for warranty service.
Should any problem covered under warranty occurs, customers can contact their
dealers or distributors in regards to their warranty claims, as long as the
product was purchased from an authorized dealer or distributor. NITECORE’s
Warranty is provided only for products purchased from an authorized source.
This applies to all NITECORE products. To be qualified for warranty, please
refer to the “IMPORTANT WARRANTY NOTICE” section on top to validate your
product. Any DOA / defective product can be exchanged for a replacement
through a local distributor/dealer within the 15 days of purchase. After 15
days, all defective/malfunctioning NITECORE® products can be repaired free of
charge for a period of 12 months (1 year) from the date of purchase. Beyond 12
months (1 year), a limited warranty applies, covering the cost of labor and
maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified if the product(s) is/are:
- broken down, reconstructed and/or modified by unauthorized parties
- damaged from wrong operations (i.e. reverse polarity installation, installation of non-rechargeable batteries or failure to obey the warnings)
- damaged by batteries leakage.
For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to service@nitecore.com
All images, text and statements specified herein this user manual are for reference purpose only. Should any discrepancy occur between this manual and information specified on www.nitecore.com, information on our official website shall prevail. SYSMAX Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.
IMPORTANT NOTICE CONCERNING WARRANTY SERVICE
Thank you for purchasing! Before using this charger, please find your verification code on the package box, and go to http://charger.nitecore.com/validation (or scan the QR code beside the verification code to visit on your mobile phone). Type in your verification code and personal information as required, and submit the page. After verification, Nitecore will send you a warranty service email. This email and your registration email address are essential to your possible warranty application. Before you complete the warranty service registration, you cannot enjoy our warranty service for your purchase.
Features
- Dual slot battery charger
- Compatible with Canon LP-E6N camera batteries
- QC 2.0 Available
- USB input
- Real-time information on battery voltage, charging current, battery temperature, charged volume and battery health
- Automatically detects battery health
- Reverse polarity protection and anti-short circuit protection
- Automatic adoption for the optimal charging modes between CC and CV
- Automatic selection for charging current
- Automatic termination upon charging completion
- Activates over-discharged batteries with protective circuits
- Compatible with power banks, 5V solar panels and USB adaptor
- Made from durable and fire retardant PC materials
- Optimal heat dissipation design
- Insured worldwide by Ping An Insurance (Group) Company of China, Ltd.
Accessories
USB Charging Cable
Specifications
Input: DC 5V/2A or 9V/2A
Output Voltage: Slot 1 8.4V±1%
Slot 2 8.4V±1%
Output Current: QC Mode: 1,200mA1 (MAX), 800mA2 (MAX)
Standard Mode: 1,000mA*1 (MAX)
Interface: Input: USB
Output: connector
Battery compatibility:
Canon camera battery LP-E6N
LP-E6N Compatible models:
Canon EOS 6D Mark II, Canon EOS 5D Mark IV, Canon EOS 80D,
Canon EOS 5DS, Canon EOS 5DS R, Canon EOS 70D,
Canon EOS 6D, Canon EOS 5D Mark III, Canon EOS 60D,
Canon EOS 7D, Canon EOS 7D Mark II, Canon EOS R
Canon EOS 90D, Canon EOS Ra, Canon EOS R5,
Canon EOS R6
(Please refer to battery compatibility for more compatible models)
Dimensions: 125mm×70mm×29mm (4.92” ×2.76” ×1.14”)
Weight: 93.5g (3.3oz)
Operating Instructions
This product is designed specifically for Canon LP-E6N camera battery. It supports charging batteries in both slots simultaneously. The output current is adjusted automatically according to input current to reach the optimal charging setting. This product shall NOT be used with other batteries not specified in this manual.
Charging Modes
The UCN2 Pro has 2 charging modes (QC Mode and Standard Mode).
QC Mode: The UCN2 Pro is QC 2.0 available. When connecting to a QC supported
device (or adaptor), the display will show “Quick Charge” on the upper left
corner. In this status (Input Voltage: 9V), it can charge 2 batteries
simultaneously with a max output current of 800mA in either slot, or 1 battery
with a max output current of 1,200mA.
Standard Mode: In this status (Input Voltage: 5V), it will charge the battery
which is put in first with a max output current of 1,000mA, and then charge
the other when the first battery is fully charged.
Automatic Current Adjustment
The UCN2 Pro’s actual output current depends on the maximum power supplied
from the USB power source. The output current will be adjusted based on the
actual power being inputted to the device, increasing its efficiency while
shortening charging duration.
Battery Health Monitoring
Once the battery is inserted, the UCN2 Pro will proceed with an initial low
current test charge to diagnose the battery status. After the diagnosis, the
battery status will be shown as Good, Normal or Poor.
Note: Re-insert the battery when “Poor” appears on screen to eliminate the
possibility of a poor battery contact, replace the battery if “Poor” comes up
on screen consistently.
Reverse Polarity and Anti-Short Circuit Protection
The UCN2 Pro makes use of the mechanical reverse polarity protection.
Inserting incompatible batteries or incorrect battery installation will
prevent the initiation of the charging process. The error message “EE EE” will
come up on the LCD display when a short circuited battery is installed.
Over Discharged Battery Activation
The UCN2 Pro will automatically activate over discharged battery caused by
improper storage or misuse.
NOTE: this function only available for batteries with protective circuit.
Cautions
- The UCN2 Pro is only compatible with Canon LP-E6N camera batteries. DO NOT attempt to charge other batteries.
- Moderate heat from this product is to be expected during the charging process, which is normal.
- Operating temperature: -10~40℃ (14~104℉), storage temperature: 20~60℃ (-4~140℉).
- Carefully read all labels on the device to ensure batteries are installed correctly.
- Please connect this charger to power supplies with the input voltage stated in the specifications of the user manual. If the input voltage is too low or too high, it may lead to malfunctions, or even a fire.
- DO NOT charge batteries if there is any sign of faulty or short circuit.
- The charger is designed for adults. Use of the charger by kids under age must be under supervision. Operation, using or cleaning of the charger may NOT be done by kids aged 8 years or younger.
- DO NOT leave the product unattended while it is connected to a power supply. Unplug the product at any sign of malfunction and refer to the user manual.
- Batteries of short lifespan should be replaced as soon as possible.
- DO NOT store or use the product in an environment where the temperature is extremely high / low or changes rapidly, or in a confined area with a high temperature.
- Store the device in ventilated areas. DO NOT uses the device in moist environment and keep away from any combustible materials.
- Avoid any shock or impact to the device.
- DO NOT place any conductive or metal object in the device to avoid short circuiting and explosions.
- Unplug the device and remove batteries when it is not in use.
- DO NOT disassemble or modify the device as doing so will render the product warranty invalid. Please refer to the warranty section in the manual for complete warranty information.
- DO NOT misuse in any way! Use for intended purpose and function only.
Disclaimer
This product is globally insured by Ping An Insurance (Group) Company of China, Ltd. NITECORE shall not be held responsible or liable for any loss, damage or claim of any kind incurred as a result of the failure to obey the instructions provided in this user manual.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>