Bluestone MCW4 Smart Wireless Car Mount User Manual

June 6, 2024
Bluestone

Bluestone MCW4 Smart Wireless Car Mount - LOGOBluestone MCW4 Smart Wireless Car Mount -
ICON MCW4
SMART WIRELESS
CAR MOUNT

Bluestone MCW4 Smart Wireless Car Mount User Manual

Bluestone MCW4 Smart Wireless Car Mount - FIGURE 1

Installing the Mount:

  1. Place the Tightening Ring over the Vent Clip Ball Joint.
  2. Place the Bal I Joint into the Socket on the back of the Car Mount
  3. Screw the Clip Ring over the Socket until the Mount is securely attached to the Vent Clip.
  4. Squeeze the Vent Clip Button until the Clamp opens.
  5. Place the Clamp-on one of the fins of your car’s air vent or any other Secure
  6. Adjust the Mount angle by loosening the Ball Joint, repositioning the mount, then re-lighting the Ball Joint.
  7. Plug the Type-C USB end of the Charging Cable into the Type-C USB Port of the Car Mount.
  8. Plug the USB end of the Charging Cable into a USB Charging Port (not included).
  9. The LED Indicator Light will turn blue when ready to charge your QI-enabled device.

Using the Mount:

  1. When your device is close to the Car Mount (5cm-20cm) the Infrared Sensor will detect your device and Automatically open the Retracting Grips.
  2. Place your device on the Device Stand and against the Wireless Charging Pad.
  3. The LED Indicator Light will turn green when your device is being charged.
  4. To release your device from the Retracting Grips simply touch the Touch Responsive Sensor on the back of the Car Mount.

Important Safeguards:

  • Do not use this unit for anything other than its intended use.
  • Keep the unit away from the heat sources and direct sunlight.
  • Do not expose the unit to extremely high or low temperatures.
  • Use the product in a location with a temperature of 32’F (O’C) – 95’F (35’C).
  • Do not let the unit come in contact with water or any liquid. If it becomes wet, immediately unplug from the power source.
  • Do not handle the unit, USB cable, or wall charger with wet hands.
  • Do not let dust or other things accumulate on the product and the wall charger.
  • Do not use the unit if it has been dropped or damaged in any way.
  • Repairs to electrical equipment should only be performed by a qualified electrician.
  • Improper repairs may place the user at serious risk.
  • If you have an electrical device, such as a pacemaker, consult a physician before using this product.
  • Do not place a magnetic card (ie. Credit Card) or similar items near this product.
  • Use the specified power source and voltage.
  • Do not use a voltage converter/ travel adapter.
  • Make sure the wall charger is inserted all the way into the electrical outlet.
  • When not in use, unplug the wall charger.
  • Place the unit on a sturdy and flat surface while charging.
  • Keep the unit out of reach of children.

BATTERY DISPOSAL:
This product contains a lithium polymer battery. Lithium polymer batteries are environmentally safe when fully discharged. Please refer to your local and state laws for battery disposal procedures.

©SM TEK GROUP INC, All rights reserved.
BlueStone is a trademark of SM TEK GROUP INC.
New York, NY 10001
www.smtekgroup.com
1 Year Limited Warranty
Please Email cs@smtekgroup.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals