Bluestone MC20 360° Rotation Auto Gimbal Smart Face Tracking User Manual

MC20

User Manual

INSTRUCTIONS:

Install the App”Live 360″ through your device’s app store or scan the QR code to be taken directly to the app’s download page.

|
---|---
http://www.qrtransfer.com/live360.html| http://www.qrtransfer.com/live360.html

Enter the app and the blue light will flash after the automatic connection is successful, You can now start 360° Auto-tracking

Special tips:

1. Provide permissions from your mobile phone to the Live 360 app
2. During the connection process between the Silo 360 and your mobile phone, there is no need to search for a Bluetooth name (Live 360). The Silo 360 should automatically pair with your phone’s Bluetooth
3. Some mobile phone models may have a Bluetooth link delay. Please wait patiently for Bluetooth automatic connection to succeed, or restart the Silo 360 and Live 360 app and retry the automatic connection

Installing the batteries:
Open the battery cover, install three AA alkaline dry batteries in the direction marked on the battery box, and then close the battery cover.

Installing the batteries:
Open the battery cover, install three AA alkaline dry batteries in the direction marked on the battery box, and then close the battery cover.

Horizontal and vertical switching:
Tum the knob on the back of the phone mount, then turn the phone clip to the horizontal or vertical position. Re-tighten the knob and then insert your mobile phone into the phone clip.

Power on:
Press the button on the front of the mount until the red light flashes.

Power off:
Press the button on the front of the mount until the red light turns off.

Connecting devices

1. Silo 360 starts, red light flashes, Silo 360 is in the state of waiting for Bluetooth connection
2. Turn on the Bluetooth and location information (GPS, positioning) of the mobile phone, open the Live 360 app and the Silo 360 will automatically connect
3. When the Silo 360 blue light flashes, the Bluetooth icon on the app interface turns blue, and the Silo 360 and app are automatically connected
4. The Silo 360 will automatically shut down if the Bluetooth is disconnected for 40 seconds

Important Safeguards:

• Do not use this unit for anything other than its intended use.
• Keep the unit away from the heat sources and direct sunlight.
• Do not expose the unit to extremely high or low temperatures.
• Use the product in a location with a temperature of 32″F (0’C) – 95’F (35’C).
• Do not let the unit come in contact with water or any liquid. If it becomes wet, immediately unplug from the power source.
• Do not handle the unit, USB cable, or wall charger with wet hands.
• Do not let dust or other things accumulate on the product and the wall charger.
• Do not use the unit if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a qualified electrician.
• Improper repairs may place the user at serious risk.
• If you have an electrical device, such as a pacemaker, consult a physician before using this product.
• Do not place a magnetic card (IE. Credit Card) or similar items near this product.
• Use the specified power source and voltage.
• Do not use a voltage converter/ travel adapter.
• Make sure the wall charger is inserted al I the way into the electrical outlet.
• When not in use, unplug the wall charger.
• Place the unit on a sturdy and fiat surface while charging.
• Keep the unit out of reach of children.

BATTERY DISPOSAL:
This product contains a lithium polymer battery. Lithium polymer batteries are environmentally safe when fully discharged. Please refer to your local and state laws for battery disposal procedures.

©SM TEK GROUP INC, All rights reserved
BlueStone is a trademark of SM TEK GROUP INC
New York, NY 10001
www.smtekgroup.com
1 Year Limited Warranty
Please Email cs@smtekgroup.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>