rapoo M100 Multi-Mode Wireless Mouse User Guide
- June 6, 2024
- rapoo
Table of Contents
Quick Start Guide
Multi-mode Wireless Mouse
M100,M200,M260,M280,M100Silent,M200Silent,M260 Silent, M280 Silent
Bluetooth mode
Pair your first device
Turn on mouse
Keep pressing the Bluetooth button for at least 3 seconds to pair. The status
LED flashes red slowly. The mouse is discoverable for 2 minutes.
Complete Bluetooth pairing on your device as follows. When the mouse and your
device are paired, the light turns off.
Pair your second device
Press the Bluetooth button to switch to another channel.
Follow steps 2 and 3 of “Pair your first device” to connect your second
device.
Windows®7 and 8:
(1) Click the “Start” button, then select Control Panel > Add a device.
(2) Select “RAPOO 3.0 MS” or “RAPOO 5.0 MS ” from the list, then click Next.
Windows®10:
(1) Click the “Start” button, then select Settings > Devices > Bluetooth.
(2) Select “RAPOO 3.0 MS” or “RAPOO 5.0 MS” from the list, then click Pair.
Switch among paired devices
Press the Bluetooth button to switch among up to 3 paired devices. The mouse
connects up to 2 devices via Bluetooth and 1 via a 2.4 GHz receiver.
Status LED
When you pick up the mouse
If the red light turns stable for 6 seconds, Bluetooth device 1 is paired. If
the red light flashes slowly, Bluetooth device 2 is paired. If the light is
off, the 2.4 GHz device is paired.
Low battery
The red light rapidly flashes twice every two seconds when you use the mouse.
Package contents
Windows®XP / Vista / 7 / 8 / 10 or later, USB port
**Warranty
**
The device is provided with a two-year limited hardware warranty from the purchase day. Please see www.rapoo.com for more information.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate this equipment. (Example- use only shielded interface
cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. This equipment complies
with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation. Caution!
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void
the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. This equipment complies
with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation. Caution!
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void
the user’s authority to operate the equipment.
IC RSS warning
This device complies with Industry Canada licence-exempt RSS standard (s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,including interference that may
cause undesired operation of the device.
IC Radiation Exposure Statement:
This equipment complies with IC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
It is forbidden to reproduce any part of this quick start guide without the permission of Shenzhen Rapoo Technology Co., Ltd.
Declaration of Conformity
We, the manufacturer Shenzhen Rapoo Technology Co., Ltd. Fax: +86-0755-2858
8555
Declare that the product Product Name : Multi-mode Wireless Mouse Model No :
M100, M200, M260, M280, M100 Silent, M200 Silent, M260 Silent M280 Silent
Complies with the following norms of :
EN 300 440 V2.1.1(2017-03)
EN 300328 V2.1.1(2016-11)
EN 301 489-1 V2.2.0(2017-03)
EN 301 489-3 V2.1.1(2017-03)
EN 301 489-17 V3.2.0(2017-03)
EN 62479:2010
EN 60950-1:2006+A11:2009+A1:2010+Al2:2011+A2:2013
The product is in compliance with the essential requirements of Radio
Equipment Directive 2014/53/EU, and the RoHS Directive 2011/65/EU.
Manufacturer/Authorised representative
Kai Guo, ManagerR&D Department Date of Issue: Aug. 30, 2017
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>