AeroCool 201-1839 Power Supply Unit User Manual
- June 6, 2024
- AeroCool
Table of Contents
AeroCool 201-1839 Power Supply Unit User Manual
Before installation
- Make sure that the wattage and output of your PSU are enough to power your system’s requirements.
- Make sure that the power cord is disconnected and that the PSU switch is turned off.
- This PSU was designed for NON-INDUSTRIAL desktop systems according to INTEL’s Desktop Platform Form Factors. Usage outside of these parameters, including cryptocurrency mining, might cause overheating, malfunction, or damage to your equipment and will void your warranty.
- DO NOT attempt to expand the connectors through adapters or other means.
- DO NOT operate in wet or damp conditions.
- Do NOT open the PSU casing, the unit operates with hazardous voltages, and there is no serviceable component inside.
- Do NOT remove the warranty sticker. Damage or removal of the sticker will void your warranty.
- Please visit Aerocool official website www.aerocool.io for details on your PSU warranty policy
How to Install / Connector Description
- Before installing the PSU, unplug the AC power cord and make sure the I/O panel is off.
I/O panel is off
-
Connect 20+4-pin connector to the motherboard.
[Note] The detachable 4-pin connector of the 20+4-pin is not suitable for
ATX12V 4-pin connector. Incorrect connection may cause irreversible damage.
Motherboard 20+4PIN
-
Connect ATX12V (CPU power) 4-pin or 8-pin (by 4+4-pin) to the motherboard.
ATX12V 4/8-PIN (by 4+4-PIN)
-
Connect SATA connector to devices, i.e. HDD/SSD/ODD.
-
SATA
-
HDD
-
SSD
-
ODD
-
-
Connect Molex 4-pin connector to devices, i.e. HDD/ODD/case fan.
-
PATA
-
HDD
-
Case Fan
-
ODD
-
-
Connect PCIe 6-pin or 8-pin (by 6+2-pin) to graphics card.
[Note] Do not connect the PCIe 6+2-pin connector to the ATX12V 8-pin
connector. Incorrect connection may cause irreversible damage.
PCIe 6/8-pin (by 6+2-PIN)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>