legrand Wattstopper Auxiliary Relay Power Pack User Manual
- June 9, 2024
- Legrand
Table of Contents
legrand Wattstopper Auxiliary Relay Power Pack
WIRING
The power pack attaches to existing junction boxes. All low voltage wiring should be at least 22 gauge wire. All high voltage connections should be at least 14 gauge. Always check local building codes. After initial wiring is complete, verify that power pack is wired correctly. Improper wiring can damage the power pack, lighting system and occupancy sensor.
WARNING
TURN THE POWER OFF AT THE CIRCUIT BREAKER BEFORE INSTALLING POWER PACKS OR
AUXILIARY RELAY PACKS. ONLY QUALIFIED ELECTRICIANS SHOULD INSTALL THESE UNITS.
WARRANTY INFORMATION
Wattstopper warranties its products to be free of defects in materials and workmanship for a period of five (5) years. There are no obligations or liabilities on the part of Wattstopper for consequential damages arising out of, or in connection with, the use or performance of this product or other indirect damages with respect to loss of property, revenue or profit, or cost of removal, installation or reinstallation.
Customer Support
800.879.8585
www.legrand.us/wattstopper
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>