GILPWA Industrial Pipe Shelving 2 Tiers 24in Bathroom Shelves Wall Mounted Instruction Manual
- May 15, 2024
- GILPWA
Table of Contents
GILPWA Industrial Pipe Shelving 2 Tiers 24in Bathroom Shelves Wall
Mounted
ACCESSORIES CONTENTS
TOOLS
TOOLS REQUIRED FOR ASSEMBLY(not included)
INSTALLATION INSTRUCTIONS
- Mount basket F to board D (board D has 4 preset holes for easy screw access), a process that requires 4 screws [bl and a screwdriver.
- Tighten A and B pipes through the holes of the board, and keep the board perpendicular to the pipes by rotating B.
- Connect the plank E through the pipes A and B. Tighten A so that the plank is in a vertical position with the pipe. (If the board is pointing in a different direction, it has been over-tightened, simply place the board on the wall and turn it back to the desired position).
- Connect each of the 4 flanges to pipe A.
- 1. Determine the location of the hole and mark it well
- 2. Use an electric drill with?MM drill bit to drill small holes in the wall ****
- 3. Select wall anchor: if it is tile wall, select concrete anchor [c], if it is gypsum wallboard, select drywall anchor [d]
- 4. Use a hammer to hammer the anchor into the wall
- 5. Use a screwdriver to screw [a] through the flange C into the wall anchor, thus fixing the shelf on the wall (due to the shelf is heavy, this process may require 2 people to cooperate to complete)
Read User Manual Online (PDF format)
Loading......