motorola PIP1010 WiFi HD Motorized Video Baby Camera User Guide

: June 4, 2024
: Motorola

Table of Contents

Motorola PIP1010 WiFi HD Motorized Video Baby Camera
At a glance
Wall mount the camera unit
View the baby through your device
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Motorola PIP1010 WiFi HD Motorized Video Baby Camera

At a glance

Camera
Desk stand
Speaker
Antenna
Power jack
Power indicator
Lights up in blue when powered on.
Pair button
(For information on how to connect the camera unit to your device, see section 4.)

Connect

Plug the DC plug of the power adapter into the power socket on the rear of the camera unit and plug the other end of the AC adapter into the wall socket.
The camera unit turns on and the power indicator lights up in blue first and changes to red flashing if not paired to the Motorola Nursery App.

WARNING

Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1 meter or 3 feet away). Do not remove the tags from the AC Adapters. Only use the AC Adapters provided.
Note
Use only the supplied power adapter (DC5V / 1000 mA).

Wall mount the camera unit

motorola PIP1010 WiFi HD Motorized Video Baby
Camera fig 3

Mark the positions of 2 screw holes on the wall. Drill a screw hole at each marking.
Install the supplied wall anchors into 2 screw holes on the wall.
Insert the supplied wall mounting screws into the wall anchors.
Remove the desk stand by loosening the screw on the underside of the desk stand.
Fix and fasten this screw on the camera unit and the wall mount bracket.
Hang the wall mount bracket on the wall mounting screws on the wall.

Note
The pack includes a power adapter with a longer cord which is beneficial for wall mount application, where your wall socket is far from the camera.

View the baby through your device

Minimum system requirement of your device

Android™ System: Version 7.0 or above
iPhone®/iPad® iOS: Version 10.0 or above
High Speed (Wi-Fi®) Internet: At least 0.6 Mbps upload bandwidth per camera (you can test your internet speed on this site:
http://www.speedtest.net).

Connect to Wi-Fi® and use the Nursery App motorola PIP1010 WiFi HD Motorized
Video Baby Camera fig 4

Scan the QR code with your smart device and download the Motorola Nursery App from App Store for iOS devices or from Google Play™ Store for Android™ devices.
Install the App on your device.
Follow the on-screen instructions to run and sign up or log in to the App.
Open the Motorola Nursery App on your compatible smartphone or tablet.
Follow the in-app instructions to create your account and connect the camera to your device.
When the connection is successfully established, you can remotely adjust the camera with your device.

Note
If the connection is lost, check your Wi-Fi® settings and reconnect your Wi- Fi® if necessary. Ensure the camera unit is switched on. Wait for a few minutes for the camera unit to reconnect with your device.