permobil HMD Cushion Roho Quadtro Select Instructions
- September 26, 2024
- permobil
Table of Contents
permobil HMD Cushion Roho Quadtro Select
Specifications
- Manufacturer: ROHO, Inc.
- Model: Seating Cushion
- Usage: Clinicians use only
- Country of Origin: USA
- Contact: USA – 800.736.0925 | orders.roho@permobil.com, Canada- 800.265.9830 | sales.ca@permobil.com
Product Usage Instructions
Inflation Process
- Open the inflation valve.
- Inflate with the hand pump until all air cells feel firm.
- Remove the hand pump without closing the valve.
- Allow air to escape from the valve to deflate.
- Close the inflation valve.
Setup
- Place the cushion on the seating surface with air cells facing up.
- Transfer to the cushion.
- Perform a hand check to ensure proper inflation.
Additional Notes
For alternate inflation instructions and further setup, safety, and care
details, refer to the manual provided with the cushion and cover.
IMPORTANT! A clinician who is experienced in seating and positioning
should determine whether atmospheric inflation is appropriate for the
individual’s seating needs. For alternate inflation instructions and
additional setup, safety, and care information, refer to the manual provided
with the cushion and cover.
WARNING: DO NOT place any weight on the cushion during atmospheric
inflation
Inflate the cushion and deflate to atmospheric pressure.
-
Open the inflation valve. (Fig. 1)
-
Inflate with the hand pump until all of the air cells feel firm.
-
Remove the hand pump. Do not close the inflation valve.
-
Allow air to escape from the inflation valve. (Fig. 2)
Suggestion: Listen (or place your hand in front of the inflation valve) to confirm that deflation has stopped. -
Close the inflation valve. (Fig. 3)
Finish setup.
- Place the cushion on the seating surface, air cells facing up.
- Transfer to the cushion.
- Perform hand check.
WARNING: Clinician: If you are concerned about insufficient air between the individual and the base of the cushion, perform a hand check after atmospheric inflation, and adjust as needed. (Fig.4)
MORE INFORMATION
- ADDRESS: ROHO, Inc. 1501 S 74th St, Belleville, IL 62223 USA
- USA: 800.736.0925
- orders.roho@permobil.com
- Canada: 800.265.9830
- sales.ca@permobil.com
- permobil.com
Products may be covered by one or more U.S. and foreign patents and
trademarks, including MOSAIC® , Permobil® and ROHO®
© 2024 Permobil #AIG-MOS Rev. 2024-05-03
FAQ
- Q: Can I place weight on the cushion during atmospheric inflation?
- A: No, it is important not to place any weight on the cushion during atmospheric inflation to avoid damage.
- Q: How can I check for sufficient air between the individual and the base of the cushion?
- A: Clinicians should perform a hand check after inflation and adjust as needed to ensure proper support.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>