VMAX VX1 e-Scooter User Manual

: June 6, 2024
: VMAX

VMAX VX1 e-Scooter User Manual

VX1

VMAX Global AG
Distribution Europa
Industrieweg 32 / 4852 Rothrist – Switzerland
Phone: +41 79 586 90 98
Mail: service@vmaxglobal.net
Website: www.vmax-escooter.ch

The brand VMAX

VMAX was founded in 2015 and is a Swiss brand with various mobility solutions. The company‘s vision „your mobility solution“ is underpinned with diverse product groups in the field of mobility.

VMAX wants to develop the best e-scooter, pedelec or hoverboard for each the best e-scooter, the best pedelec or the best hoverboard. To achieve this goal, the brand maintains a constant exchange of ideas, comments, suggestions for improvement and knowledge with the VMAX community (VMAX customers or people interested in the topic) to always be on the pulse of time and as close to the customer as possible.

All products are produced according to the highest quality and safety standards (ISO9001). The VMAX products come from an Amfori BSCI audited factory.

Introduction

CONGRATULATIONS

Dear Customer

We congratulate you on the purchase of your new VMAX e-scooter and welcome you to the VMAX family. To ensure that you have a good knowledge of the device and can experience the greatest possible driving pleasure with the highest level of safety, it is important that you read this user manual carefully before using it for the first time and keep it for any questions that may arise later. We hope you enjoy using your new e-scooter!

Scope of delivery

Check your VMAX package for the following contents:

E-Scooter
Charger
Tool kit
User manual DE / FR / EN

Road approval

An e-scooter is a means of locomotion with an electric motor and therefore falls into the category of light motor vehicles or, in Germany, into the category of „miniature electric vehicles“. Your device meets all the requirements and conditions for the category of light motor vehicles and „very small electric vehicles“ and also has an operating permit (ABE) required in Germany.

Both in Switzerland and in Germany, e-scooters are subject to the rules of public road traffic, which must be complied with.

Road approval Switzerland / Germany

Special registration-related instructions Switzerland:

From 14 years with driver‘s license category M
From 16 years without driver‘s license
No license plate obligation

Special registration-related instructions Germany:

From 14 years without driver‘s license
Operating permit scooter (ABE)
Compulsory insurance (sticker must be attached)

For other road approvals, please refer to the regulations in force in your country.

Disclaimer

Since it is not possible for us to control the handling of the e-scooter, the compliance with operating instructions, as well as the charging / discharging and the maintenance of the battery, VMAX Global AG cannot assume any liability for losses, damages or costs. Any claim for damages that may arise from, or in any way be related to, the operation, failure or malfunction is denied. We accept no liability for personal injury, damage to property or the consequences thereof arising from our delivery. To the extent permitted by law, the obligation to pay damages, on whatever legal grounds, shall be limited to the invoice value of our products directly affected by the event. This shall not apply insofar as we are liable according to mandatory statutory provisions or gross negligence.

Symbols used

In the manual

WARNING: Warning of possible risks, personal injury and danger of injury.

ATTENTION: Indication of need for action or adjustment work by the user.

On the packaging

CE mark (Conformity Europe) this product is constructed in conformity with designated european standards.

The battery must not be disposed of with household waste.

Cells in the battery contain lithium.

Follow instructions!

Safety instructions

WARNING:
RIDING AN E-SCOOTER CAN RESULT IN SERIOUS INJURY OR DEATH

Please note that the instructions and hazard warnings described in the operating instructions can reduce the risk, but not all risks are excluded. We ask you to handle your e-scooter carefully and responsibly.

ATTENTION:
Read user manual before commissioning

We recommend that you wear a hard hat and other protective equipment. Make sure you wear good footwear with a flat sole.
Drive only on dry, clean, level surfaces and when road conditions and weather warrant safe driving. Never drive on snow, ice, or slushy surfaces, in heavy rain, or in conditions of limited visibility.
Never ride on stairs, escalators, ramps, over curbs longer than 2 cm, or in skate parks.
Do not drive if you feel unwell or tired and stop driving if you feel tired or unwell during the journey.
The e-scooter is designed for use by a single person. Any infringement will be regarded as improper use. The user bears all risks.
All interventions to increase the power or speed, as well as general changes to the characteristics of the e-scooter are punishable by law and will be prosecuted, furthermore any warranty claims are void.
The e-scooter must not be driven by children under the age of 14.
Persons with physical limitations are recommended to have an accompanying person, especially at the beginning and according to the severity of the limitation. If the physical balance is impaired, do not use the e-scooter.
The maximum weight for use must be observed (see technical data, page 20).
Never drive under the influence of alcohol, medication or drugs.
Always place both feet on the footboard while riding.

Safety instructions lithium ion battery

WARNING:

The lithium ion battery may only be charged under supervision and not overnight.
The li-ion battery must not be charged when your device or the device or the charging cable are wet or damp.
Only use the original charger included in the scope of delivery to charge the li-ion battery.
Never charge the li-ion battery near flammable materials, liquids, heat sources or fire.
Keep the li-ion battery away from children and animals.
If your li-ion battery is damaged, leaking electrolytes may cause a risk of poisoning or chemical burns. Avoid inhaling the escaping vapors! Avoid skin contact! In case of accidental skin contact, rinse the affected area thoroughly with water and consult a doctor.
If your li-ion battery catches fire, never extinguish it with water! Use sand or a CO2 fire extinguisher as an extinguishing agent.
Do not make any modifications to your li-ion battery. Never modify, repair or disassemble the li-ion battery.

Charging process

ATTENTION:

Your device requires regular charging. Proceed as follows:

Fully charge the li-ion battery before initial operation and do not interrupt the charging process. Also do not switch on or operate your device during the charging process.
Make sure that the charger plugs and the charging socket are dry before charging and that there is no dirt or dust in or on them.
Connect the charging plug to the charging socket on your e-scooter.
Connect the charger to the power socket via the power plug.
During the charging process, the LED control lamp on the charger lights up red.
Once the li-ion battery of the e-scooter is charged, the LED indicator light on the charger will turn green and you can remove the charger.

Maintenance and Care

ATTENTION:

Your device requires regular and careful maintenance. Proceed as follows:

Your e-scooter is not waterproof. The device is protected against dust in harmful quantities and protected against splashing water on all sides in accordance with the IP 54 standard.
Disconnect the e-scooter, if connected, from the charger and switch it off.
Check your device for loose parts, damage, excessive wear and the integrity of the housing and tires. If you find any defects during the inspection, stop using the e-scooter and contact your dealer.
Your e-scooter has solid rubber tires, which do not need to be inflated.

PLEASE NOTE:

Therefore, use a damp rag for maintenance and avoid contact of water with electronic components in any case.
Dry the device completely, before each start-up or loading.

Storage

ATTENTION:

Your device requires some rules during storage, proceed as follows:

Charge the li-ion battery to approx. 60% before storage.
Repeat the procedure at least every four weeks during storage and when not in use to avoid deep discharge.
Protect your e-scooter from dust and other external influences, ideally in the stored original packaging.
Store the e-scooter in a dry place and at a temperature of 10 to 15°C, which is optimal. Make sure that the room temperature does not drop below 5°C and do not store the e-scooter outdoors.
Never store the e-scooter for a long period of time in high heat (e.g. in the car in summer).
There is no warranty claim for damage to the li-ion battery due to improper storage or insufficient charging during storage or non-use (deep discharge).

Parts description

Assembly

Display

Screen Display

Speed
Km/h (this is the adjusted display)
Km (Display for ODO and Trip)
Gear
Light
Error display
Trip / ODO
Battery display
Menu button
On / off button

Display functions

On/off gear shifting

Press the on / off button (10) for 2 seconds to switch on the device.
Briefly press the menu button (9) to switch between the gears:

1 = first gear 10 km/h
2 = second gear 15 km/h
3 = third gear 20 km/h

Press the menu button (9) for 4 seconds to access the ODO display.
Press the menu button (9) again for 4 seconds to get to the trip display.

ODO = total kilometers driven / Trip = kilometers driven per trip

Press the on / off button (10) again for 4 seconds to switch the device off. If the e-scooter is not used, the device switches off automatically after 5 minutes.

Light

Press the on / off button (10) once briefly to switch the light either on or off.

Adjustments

Brake adjustment drum brake

If the brake lever has too much „play“ for your needs, you can turn the nut on the drum brake clockwise.

Fine adjustment handlebar and folding mechanism

If you feel that the handlebars are wobbling a bit, first tighten the four bolts that secure the steering head with a 2.5 mm allen wrench.

Other screws are located on the folding mechanism and on the lower end of the handlebar. If you feel that the folding mechanism has some „play“ or that it does not engage or close correctly, you can adjust these screws. This requires good tuning, as the mechanism should have no „play“, but should open smoothly by lifting the safety latch.

Before the first ride

Make sure that the device is in perfect and undamaged condition.

Place the e-scooter on a flat surface and check the charging status of your device.
Press the on/off button on the handlebar, the display with the battery indicator lights up.
Stand directly next to your e-scooter and hold the handlebars firmly with both hands.
Place your right or left foot on the footboard and push off with the other foot. Now also place the second foot behind or next to the first foot on the footboard and press the accelerator.
To brake or stop, you can press the brake lever on the handlebars.
To switch off the e-scooter, press and hold the on/off button for 4 seconds.

ATTENTION! For safety reasons, the scooter will not start until you push off lightly with your foot from the ground as described previously.

Technical data

Product description: VMAX VX1
Art. No.: 110.52598
Battery: 36V / 7500mAh
Engine Power: 300W
Range: max. 25 km
Max. speed: approx. 20 km/h
Max. load: 100 kg
Net weight: 16.5 kg
Protection class: IP54
Operating temperature: -10 - 50°C
Charger: AC 100-240V 50-60Hz / DC+ 54V/2A
Charging time: approx. 3 hours 45 minutes
Color: black

Legal notice

All descriptions and instructions for the functions or details were checked at the time of production. Individual details may vary slightly. The manufacturer reserves the right to change design and functionality without prior notice.

Warranty

If you need technical assistance, please contact your dealer. Keep the original packaging in case your device needs to be returned. The general and statutory warranty conditions apply.

The warranty is not granted on:

Damage caused by improper use.
Damage caused due to disregard of the safety instructions.
Damage caused by commercial use.
Damage, due to a modification, accident or mishandling.
Damage, due to influences such as fire or water.
Damage caused by repairs carried out by the customer. Repairs and overhauls may only be carried out by skilled personnel!

Service

1. Disposal of electrical and electronic equipment

CH/DE

The crossed-out waste garbage can means that you are legally obliged to dispose of these devices separately from unsorted municipal waste. Disposal via the residual waste garbage can or the yellow garbage can is prohibited. If the products contain batteries or rechargeable batteries that are not permanently installed, these must be removed before disposal and disposed of separately as batteries.

2. Possibility of returning old equipment

CH

Owners of old appliances can hand them in within the framework of the possibilities for the return or collection of old appliances set up and available by public waste management authorities, so that proper disposal of the old appliances is ensured.

DE

Under the following link, it is possible to view an online directory of collection and return points for Germany:
https://www.ear-system.de/ear-verzeichnis/sammel-und-ruecknahmestellen.

3. Data protection

CH/DE

We would like to point out to all end users of waste electrical and electronic equipment that they are themselves responsible for deleting personal data on the waste equipment to be disposed of.

4. WEEE registration number

DE

Under the registration number DE38124973 we are registered with the Stiftung Elektro-Altgeräte Register, Benno-Strauss-Str. 1, 90763 Fürth, as a manufacturer of electrical and / or electronic equipment.

VMAX Global AG
Industrieweg 32
CH-4852 Rothrist
Mail: service@vmaxglobal.net
Phone: +41 79 586 90 98

Hammer International GmbH
Hagenring 57
DE-72119 Ammerbuch-Altingen
Mail: marius@hammer-international.de
Phone: 07032-9185103