VMAX R40 Electric Scooter User Manual

June 6, 2024
VMAX

VMAX R40 Electric Scooter User Manual
VMAX R40 Electric Scooter

CONGRATULATIONS

Dear Customer
We congratulate you on the purchase of your new VMAX e-scooter and welcome you to the VMAX family. To ensure that you have a good knowledge of the device and can experience the greatest possible driving pleasure with the highest level of safety, it is important that you read this user manual carefully before using it for the first time and keep it for any questions that may arise later. We hope you enjoy using your new e-scooter!

Scope of delivery

Check your VMAX package for the following contents:

  • E-Scooter
  • Charger
  • Tool kit
  • Safety screw (folding mechanism)
  • User manual DE / FR / EN

DISCLAIMER

Since it is not possible for us to control the handling of the e-scooter, the compliance with operating instructions, as well as the charging / discharging and the maintenance of the battery, VMAX Global AG cannot assume any liability for losses, damages or costs. Any claim for damages that may arise from, or in any way be related to, the operation, failure or malfunction is denied. We accept no liability for personal injury, damage to property or the consequences thereof arising from our delivery. To the extent permitted by law, the obligation to pay damages, on whatever legal grounds, shall be limited to the invoice value of our products directly affected by the event. This shall not apply insofar as we are liable according to mandatory statutory provisions or gross negligence.

SYMBOLS USED

WARNING: Warning of possible risks, personal injury and danger of injury.

ATTENTION: Indication of need for action or adjustment work by the user.

On the packaging

 CE mark (Conformity Europe) this product is constructed in conformity with designated european standards.

SYMBOLS The battery must not be disposed of with household waste.

 Cells in the battery contain lithium.

  Follow instructions!

SAFETY INSTRUCTIONS

WARNING:
RIDING AN E-SCOOTER CAN RESULT IN SERIOUS INJURY OR DEATH

Please note that the instructions and hazard warnings described in the operating instructions can reduce the risk, but not all risks are excluded. We ask you to handle your e-scooter carefully and responsibly.

ATTENTION:
Read user manual before commissioning

  • We recommend that you wear a hard hat and other protective equipment. Make sure you wear good footwear with a flat sole.
  • Drive only on dry, clean, level surfaces and when road conditi- ons and weather warrant safe driving. Never drive on snow, ice, or slushy surfaces, in heavy rain, or in conditions of limited visibility.
  • Never ride on stairs, escalators, ramps, over curbs longer than 2 cm, or in skate parks.
  • Do not drive if you feel unwell or tired and stop driving if you feel tired or unwell during the journey.
  • The e-scooter is designed for use by a single person. Any in- fringement will be regarded as improper use. The user bears all risks.
  • All interventions to increase the power or speed, as well as general changes to the characteristics of the e-scooter are punishable by law and will be prosecuted, furthermore any warranty claims are void.
  • The e-scooter must not be driven by children under the age of 14.
  • Persons with physical limitations are recommended to have an accompanying person, especially at the beginning and accor- ding to the severity of the limitation. If the physical balance is impaired, do not use the e-scooter.
  • The maximum weight for use must be observed (see technical data, page 19).
  • Never drive under the influence of alcohol, medication or drugs.
  • Always place both feet on the footboard while riding.

SAFETY INSTRUCTIONS LITHIUM ION BATTERY

WARNING:

  • The li-ion battery may only be charged under supervision and not overnight.
  • The li-ion battery must not be charged when your device or the charging cable are wet or damp.
  • Only use the original charger included in the scope of delivery to charge the li-ion battery.
  • Never charge the li-ion battery near flammable materials, liquids, heat sources or fire.
  • Keep the li-ion battery away from children and animals.
  • If your li-ion battery is damaged, leaking electrolytes may cause a risk of poisoning or chemical burns. Avoid inhaling the escaping vapors! Avoid skin contact! In case of accidental skin contact, rinse the affected area thoroughly with water and consult a doctor.
  • If your li-ion battery catches fire, never extinguish it with water! Use sand or a CO2 fire extinguisher as an extinguishing agent.
  • Do not make any modifications to your li-ion battery. Never modify, repair or disassemble the li-ion battery.

CHARGING PROCESS

ATTENTION:
Your device requires regular charging. Proceed as follows:

  • Fully charge the li-ion battery before initial operation and do not interrupt the charging process. Also do not switch on or operate your device during the charging process.
  • Make sure that the charger plugs and the charging socket are dry before charging and that there is no dirt or dust in or on them.
  • Connect the charging plug to the charging socket on your e-scooter.
  • Connect the charger to the power socket via the power plug.
  • During the charging process, the LED control lamp on the charger lights up red.
  • Once the li-ion battery of the e-scooter is charged, the LED indicator light on the charger will turn green and you can remove the charger.

MAINTENANCE AND CARE

ATTENTION:
Your device requires regular and careful maintenance.
Proceed as follows:

  • Your e-scooter is not waterproof. The device is protected against dust in harmful quantities and protected against splas- hing water on all sides in accordance with the IP 54 standard.
  • Disconnect the e-scooter, if connected, from the charger and switch it off.
  • Check your device for loose parts, damage, excessive wear and the integrity of the housing and tires. If you find any defects during the inspection, stop using the e-scooter and contact your dealer.

PLEASE NOTE:

  • Therefore, use a damp rag for maintenance and avoid contact of water with electronic components in any case.
  • Dry the device completely, before each start-up or loading.

STORAGE

ATTENTION:
Your device requires some rules during storage, proceed as follows:

  • Charge the li-ion battery to approx. 60% before storage.
  • Repeat the procedure at least every four weeks during storage and when not in use to avoid deep discharge.
  • Protect your e-scooter from dust and other external influences, ideally in the stored original packaging.
  • Store the e-scooter in a dry place and at a temperature of 10 to 15°C, which is optimal. Make sure that the room temperature does not drop below 5°C and do not store the e-scooter outdoors.
  • Never store the e-scooter for a long period of time in high heat (e.g. in the car in summer).
  • There is no warranty claim for damage to the li-ion battery due to improper storage or insufficient charging during storage or non-use (deep discharge).

PARTS DESCRIPTION

PARTS DESCRIPTION

  1. Handles
  2. Accelerator
  3. Display
  4. Switch
  5. Brake lever (left and right)
  6. Handlebar
  7. Folding mechanism
  8. Front wheel
  9. Rear wheel (motor)
  10. Front light
  11. Brake light
  12. Side LED
  13. Rear fender
  14. Front swingarm
  15. Rear shock absorber
  16. Disc brake front
  17. Disc brake rear
  18. Footboard
  19. Foot support
  20. Stand
  21. Charging port

ASSEMBLY

Step 1
Take the e-scooter out of the packaging and place it on the ground in front of you with the stand folded out.
ASSEMBLY

Step 2
Now fold the handlebar upwards and fix it with the supplied safety screw by tightening the safety screw with the two hooks in the two openings provided.
ASSEMBLY

Step 3
Now align the handlebar centered in the direction of travel and tighten the 2 screws on the handlebar to fix the handlebar head mount.
ASSEMBLY

Step 4
Now you can align the display and the brake levers according to your requirements and then tighten the screws so that the parts are fixed.
ASSEMBLY

Folding
To fold the e-scooter, loosen the front screw at the bottom of the handlebar and fold the handlebar down.
ASSEMBLY

DISPLAY

DISPLAY

  1. 1. Gear (ECO)
  2. 2. Gear (STD)
  3. 3. Gear (TURBO)
  4. Gear
  5. Trip / Odo
  6. Error Code
  7. Average speed
  8. Max. speed
  9. Km / h
  10. Speed display
  11. Battery display

DISPLAY

DISPLAY FUNCTION

1 Gear = ECO (minimum speed and higher range)
2 Gear = STD (medium speed and range)
3 Gear = TURBO (maximum speed and limited range)
Error code = displays error messages (for any error codes, please contact the service center)
Trip / Odo = shows the driven distance after switching on or the driven distance in total

ATTENTION: The battery level is indicated by 5 bars. Each bar represents about 20% of the charge. If the display shows only one bar, we recommend to fully charge the scooter immediately and not to continue the ride.

On / Off Key = with the on / off key you switch the device on and off

Up key = with the up key you shift up a gear
Down key = with the down key you shift down a gear
Set key = the set key takes you to the basic settings, please do not change them! These are intended exclusively for the service personnel of the service center

BEFORE THE FIRST RIDE

Make sure that the device is in perfect and undamaged condition.

  • Place the e-scooter on a flat surface and check the charging status of your device.
  • Press the on / off button on the handlebar, the display with the battery indicator lights up.
  • Stand directly next to your e-scooter and hold the handlebars firmly with both hands.
  • Place your right or left foot on the footboard and push off with the other foot. Now also place the second foot behind or next to the first foot on the footboard and press the accelerator.
  • To brake or stop, you can press the brake lever on the handlebars.
  • To switch off the e-scooter, press and hold the on/off button for 4 seconds.

ATTENTION! For safety reasons, the scooter will not start until you push off lightly with your foot from the ground as described previously.

TECHNICAL DATA

Product description: VMAX R40 Raserati
Art. No.: 110.52291
Battery: 48 V / 12‘500 mAh
Engine Power: 1000 W
Range: max. 45 km
Max. speed: approx. 40 km/h
Max. load: 130 kg
Net weight: 24 kg
Protection class: IP54
Operating temperature: -10 - 50°C
Charger: AC 100-240V 50-60Hz / DC+ 54V/2A
Charging time: approx. 6 hours
Color: black

LEGAL NOTICE

All descriptions and instructions for the functions or details were checked at the time of production. Individual details may vary slightly. The manufacturer reserves the right to change design and functionality without prior notice.

WARRANTY

If you need technical assistance, please contact your dealer. Keep the original packaging in case your device needs to be returned. The general and statutory warranty conditions apply.

The warranty is not granted on:

  • Damage caused by improper use.
  • Damage caused due to disregard of the safety instructions.
  • Damage caused by commercial use.
  • Damage, due to a modification, accident or mishandling.
  • Damage, due to influences such as fire or water.
  • Damage caused by repairs carried out by the customer. Repairs and overhauls may only be carried out by skilled personnel!

SERVICE

  1. Disposal of electrical and electronic equipment
    The crossed-out waste garbage can means that you are legally obliged to dispose of these devices separately from unsorted municipal waste. Disposal via the residual waste garbage can or the yellow garbage can is prohibited. If the products contain batteries or rechargeable batteries that are not permanently installed, these must be removed before disposal and disposed of separately as batteries.

  2. Possibility of returning old equipment
    Owners of old appliances can hand them in within the framework of the possibilities for the return or collection of old appliances set up and available by public waste management authorities, so that proper disposal of the old appliances is ensured.

  3. Data protection
    We would like to point out to all end users of waste electrical and electronic equipment that they are themselves responsible for deleting personal data on the waste equipment to be disposed of.

VMAX Global AG
Industrieweg 32
CH-4852 Rothrist
Mail: service@vmaxglobal.net
Phone: +41 79 586 90 98

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

VMAX User Manuals

Related Manuals