V-TAC 80133970 Solar LED Tri-Proof Tube CCT Changeble Instruction Manual

: June 6, 2024
: V TAC

Table of Contents

TECHNICAL DATA
TECHNICAL DATA (SOLAR PANEL)
INTRODUCTION & WARRANTY
WARNING!
MULTI-LANGUAGE MANUAL QR CODE
PARTS INCLUDED
REMOTE CONTROL FUNCTION
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

80133970 Solar LED Tri-Proof Tube CCT Changeble
Instruction Manual

TECHNICAL DATA

Model No/SKU:	VT-120018/SKU 6500
Lumens	3000K – 9201 m

TECHNICAL DATA (SOLAR PANEL)

Voltage (Vmp)	6V
Power (Max)	25W
Current (Max)	4.16A
Open Circuit Voltage (Voe)	7.2V
Short Circuit Current (Isc	3.47A
Max System Voltage	1000V
Wire Length	SM

INTRODUCTION & WARRANTY

Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future refer ence. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. This product is warranted for manufacturing defects only.

WARNING!

Installation must be performed by a qualified electrician
Keep away from the fire.
Don’t immerse in the water
The luminaire cannot be installed in low-lying areas, so as not to soak.

This marking indicates that this product should not be disposed of with other household wastes.

MULTI-LANGUAGE MANUAL QR CODE

http://vtac.store/vt120018

Please sean the QR code to access the manual in multiple languages.

PARTS INCLUDED

V TAC 80133970 Solar LED Tri-Proof Tube CCT Changeble - PARTS
INCLUDED

REMOTE CONTROL FUNCTION

MOTION SENSOR MODE

To activate motion sensor mode, press the button on the remote.
Automatically turns to 100% brightness when motion is detected in a range of 8-10 meters and then turn to 10% brightness in 30-40 seconds of no motion.

Note: To deactivate motions sensor mode, press on the remote.

TRI-PROOF TUBE INSTALLATION

SOLAR PANEL INSTALLATION

INSTALLATION GUIDE:

Before installing please remove all the parts to check if all are in good condition or not.
Drill hole on the ceiling/ wall as per the requirement and install brackets.
Slide the lamp body into the bracket and make sure it is fixed.
Use 2 expansion screws to fix the solar panel on the roof.
Plug the male and female plugs and tighten the waterproof cap.
Please makes sure the solar panel is adjusted incorrect angle in order to receive sunlight.
After installation tests the light using the remote control.
The remote control is designed with an operating distance of 8-10m

MAINTENANCE

Clean the light with a dry, lint-free cloth.
Check the solar panel for dirt regularly. If dirt is present remove it to guarantee the flawless function of the product.
Especially during the winter, keep the product free from snow and ice.
Confirm installation direction is correct
Confirm no objects blocking the solar panel to receive sunlight.

NOTE: The battery must be fully charged before using 3-5 rainy days

IN CASE OF ANY QUERY /ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B