VMAX R25 Wheel I Am Electric Scooter User Manual

VMAX R25 Wheel I Am Electric Scooter User Manual

CONGRATULATIONS

Dear Customer
We congratulate you on the purchase of your new VMAX e-scooter and welcome you to the VMAX family. To ensure that you have a good knowledge of the device and can experience the greatest possible driving pleasure with the highest level of safety, it is important that you read this user manual carefully before using it for the first time and keep it for any questions that may arise later. We hope you enjoy using your new e-scooter!

Scope of delivery
Check your VMAX package for the following contents:

• E-Scooter
• Charger
• Tool kit
• User manual DE / FR / EN

ROAD APPROVAL

The rules of public road traffic must be observed.

Your e-scooter meets all the requirements and conditions for driving on public roads.

Special registration-related instructions Switzerland:

• From 14 years with driver‘s license category M
• From 16 years without driver‘s license
• No license plate obligatio

For approval-related instructions in other countries, please refer to the regulations in your country.

DISCLAIMER

Since it is not possible for us to control the handling of the e-scooter, the compliance with operating instructions, as well as the charging / discharging and the maintenance of the battery, VMAX Global AG cannot assume any liability for losses, damages or costs. Any claim for damages that may arise from, or in any way be related to, the operation, failure or malfunction is denied. We accept no liability for personal injury, damage to property or the consequences thereof arising from our delivery. To the extent permitted by law, the obligation to pay damages, on whatever legal grounds, shall be limited to the invoice value of our products directly affected by the event. This shall not apply insofar as we are liable according to mandatory statutory provisions or gross negligence.

SYMBOLS USED

WARNING: Warning of possible risks, personal injury and danger of injury.

ATTENTION: Indication of need for action or adjustment work by the user.

On the packaging

 CE mark (Conformity Europe) this product is constructed in conformity with designated European standards.

 The battery must not be disposed of with household waste.

 Cells in the battery contain lithium.

 Follow instructions!

SAFETY INSTRUCTIONS

WARNING:
RIDING AN E-SCOOTER CAN RESULT IN SERIOUS INJURY OR DEATH

Please note that the instructions and hazard warnings described in the operating instructions can reduce the risk, but not all risks are excluded. We ask you to handle your e-scooter carefully and responsibly.

CAUTION:
Read user manual before commissioning

• We recommend that you wear a hard hat and other protective equipment. Make sure you wear good footwear with a flat sole.
• Drive only on dry, clean, level surfaces and when road conditions and weather warrant safe driving. Never drive on snow, ice, or slushy surfaces, in heavy rain, or in conditions of limited visibility.
• Never ride on stairs, escalators, ramps, over curbs longer than 2 cm, or in skate parks.
• Do not drive if you feel unwell or tired and stop driving if you feel tired or unwell during the journey.
• The e-scooter is designed for use by a single person. Any infrin- gement will be regarded as improper use. The user bears all risks.
• All interventions to increase the power or speed, as well as general changes to the characteristics of the e-scooter are punishable by law and will be prosecuted, furthermore any warranty claims are void.
• The e-scooter must not be driven by children under the age of 14. Persons with physical limitations are recommended to have an accompanying person, especially at the beginning and according to the severity of the limitation. If the physical balance is impaired, do not use the e-scooter.
• The maximum weight for use must be observed (see technical data, page 19).
• Never drive under the influence of alcohol, medication or drugs.
• Always place both feet on the footboard while riding.

SAFETY INSTRUCTIONS LITHIUM ION BATTERY

WARNING

• The li-ion battery may only be charged under supervision and not overnight.
• The li-ion battery must not be charged when your device or the device or the charging cable are wet or damp.
• Only use the original charger included in the scope of delivery to charge the li-ion battery.
• Never charge the li-ion battery near flammable materials, liquids, heat sources or fire.
• Keep the li-ion battery away from children and animals.
• If your li-ion battery is damaged, leaking electrolytes may cause a risk of poisoning or chemical burns. Avoid inhaling the escaping vapors! Avoid skin contact! In case of accidental skin contact, rinse the affected are a thoroughly with water and consult a doctor.
• If your li-ion battery catches fire, never extinguish it with water! Use sand or a CO2 fire extinguisher as an extinguishing agent.
• Do not make any modifications to your li-ion battery. Never modify, repair or disassemble the li-ion battery.

LOADING PROCESS

ATTENTION:
Your device requires regular charging. Proceed as follows:

• Fully charge the li-ion battery before initial operation and do not interrupt the charging process. Also do not switch on or operate your device during the charging process.
• Make sure that the charger plugs and the charging socket are dry before charging and that there is no dirt or dust in or on them.
• Connect the charging plug to the charging socket on your e-scooter.
• Connect the charger to the power socket via the power plug.
• During the charging process, the LED control lamp on the charger lights up red.
• Once the li-ion battery of the e-scooter is charged, the LED indicator light on the charger will turn green and you can remove the charger.

MAINTENANCE AND CARE

ATTENTION
Your device requires regular and careful maintenance. Proceed as follows:

• Your e-scooter is not waterproof. The device is protected against dust in harmful quantities and protected against splashing water on all sides in accordance with the IP 54 standard.
• Disconnect the e-scooter, if connected, from the charger and switch it off.
• Check your device for loose parts, damage, excessive wear and the integrity of the housing and tires. If you find any defects during the inspection, stop using the e-scooter and contact your dealer.

Please note:

• Therefore, use a damp rag for maintenance and avoid contact of water with electronic components in any case.
• Dry the device completely, before each startup or loading.

STORAGE

ATTENTION:
Your device requires some rules during storage, proceed as follows:

• Charge the li-ion battery to approx. 60% before storage.
• Repeat the procedure at least every four weeks during storage and when not in use to avoid deep discharge.
• Protect your e-scooter from dust and other external influences, ideally in the stored original packaging.
• Store the e-scooter in a dry place and at a temperature of 10 to 15°C, which is optimal. Make sure that the room temperature  does not drop below 5°C and do not store the e-scooter outdoors.
• Never store the e-scooter for a long period of time in high heat (e.g. in the car in summer).
• There is no warranty claim for damage to the li-ion battery due to improper storage or insufficient charging during storage or nonuse (deep discharge).

PARTS DESCRIPTION

1. Handles
2. Accelerator
3. Display
4. Switch for turn signal and light
5. Quick release fastener
6. Snap locks
7. Handlebar
8. Safety lock
9. Folding lever
10. Front fender
11. Front wheel
12. Disc brake front
13. Stand
14. Footboard
15. Front light
16. Rear light
17. Side indicators rear
18. Side indicators front
19. Rear wheel (motor)
20. Charging port
21. Disc brake rear
22. Suspension rear and front

ASSEMBLY

Step 1
Remove the e-scooter from the packaging and check whether all parts of the scope of delivery (page 4) are included. Now place the e-scooter on the ground in front of you, press the folding lever (9) down and pull the handlebar (7) up until it engages.

Step 2
Now close the safety lock (8) to secure the handlebar (7). Now fold the two handles upwards until they engage.

Step 3
It is now important that you fix the loose components with the supplied tool kit. Make sure that the components are mounted flush with the rubber handles so that the two snap locks (6) for folding the handles are not blocked.

Step 4
Now open the quick release fastener (5), extend the handlebar (7) to the desired height and then close the quick release fastener (5) again.

Folding
To fold the e-scooter, open the quick release fastener (5) again and push the handlebars down as far as they will go. Now pull the two snap locks (6) and fold the handles down. Now release the safety lock (8). Pull the folding lever (9) and now carefully fold down the handlebar (7) until the folding lever (9) engages by itself.

DISPLAY

This display has two buttons: the on/off button and the mode button. To start the device, press the on/off button for about 3 seconds. The display turns on and shows you the last used mode (see below modes). If you now press the on/off button (briefly), you can choose from the following modes.

DISPLAY FUNCTIONS

Modes

• TIME = Travel time
• TRIP = Kilometres driven per activation
• ODO = Total kilometres driven
• DST = Remaining mileage (in connection with the battery charge level)
• VOL = Battery voltage in volt
• CH2:00 = Acompensation time until the scooter switches off automatically (when not in use)

To switch between the three gears, press the mode button:

1 = 10 km/h
2 = 15 km/h
3 = 20 km/h

Turn signal and light switch
The light switch allows you to turn the lights on and off. With the turn signal switch you can activate the side turn signals on the footboard either left or right.

1. Turn signal switch
2. Light switch

BEFORE THE FIRST RIDE

Make sure that the device is in perfect and undamaged condition.

• Place the e-scooter on a flat surface and check the charging status of your device.
• Press the on/off button on the handlebar, the display with the battery indicator lights up.
• Stand directly next to your e-scooter and hold the handlebars firmly with both hands.
• Place your right or left foot on the footboard and push off with the other foot. Now also place the second foot behind or next to the first foot on the footboard and press the accelerator.
• To brake or stop, you can press the brake lever on the handle bars.
• To switch off the e-scooter, press and hold the on/off button for 4 seconds.

ATTENTION! For safety reasons, the scooter will not start until you push off lightly with your foot from the ground as described previously.

TECHNICAL DATA

Product description: VMAX R25 Performance
Art. No.: 110.52963
Battery: 48 V / 20’800 mAh
Engine power: 500 W
Range: max. 70 km
Max. speed: approx. 20 km/h
Max. load: 120 kg
Net weight: 24 kg
Protection class: IP54
Operating temperature: -10 – 50°C
Charger: AC 100-240V 50-60Hz / DC+ 54V/2A
Charging time: approx. 10 hours
Color: black

LEGAL NOTICE

All descriptions and instructions for the functions or details were checked at the time of production. Individual details may vary slightly. The manufacturer reserves the right to change design and functionality without prior notice.

WARRANTY

If you need technical assistance, please contact your dealer. Keep the original packaging in case your device needs to be returned. The general and statutory warranty conditions apply.

The warranty is not granted on:

• Damage caused by improper use.
• Damage caused due to disregard of the safety instructions.
• Damage caused by commercial use.
• Damage, due to a modification, accident or mishandling.
• Damage, due to influences such as fire or water.
• Damage caused by repairs carried out by the customer. Repairs and overhauls may only be carried out by skilled personnel!

SERVICE

1. Disposal of electrical and electronic equipment
   The crossed-out waste garbage can means that you are legally obliged to dispose of these devices separately from unsorted municipal waste. Disposal via the residual waste garbage can or the yellow garbage can is prohibited. If the products contain batteries or rechargeable batteries that are not permanently installed, these must be removed before disposal and disposed of separately as batteries.

2. Possibility of returning old equipment
   Owners of old appliances can hand them in within the framework of the possibilities for the return or collection of old appliances set up and available by public waste management authorities, so that proper disposal of the old appliances is ensured.

3. Data protection
   We would like to point out to all end users of waste electrical and electronic equipment that they are themselves responsible for deleting persona l data on the waste equipment to be disposed of.

VMAX Global AG
Industrieweg 32
CH-4852 Rothrist
Mail: [email protected]
Phone: +41 79 586 90 98

VMAX Global AG
Headquarters Distribution Europe
Industrieweg 32 / 4852 Rothrist - Switzerland
Phone: +41 79 586 90 98
Mail: [email protected]
Website: www.vmax-escooter.ch

The brand VMAX

VMAX was founded in 2015 and is a Swiss brand with various mobility solutions. The company‘s vision „your mobility solution“ is underpinned with diverse product groups in the field of mobility.

VMAX wants to develop the best e-scooter, pedelec or hoverboard for each the best e-scooter, the best pedelec or the best hoverboard. To achieve this goal, the brand maintains a constant exchange of ideas, comments, suggestions for improvement and knowledge with the VMAX community (VMAX customers or people interested in the topic) to always be on the pulse of time and as close to the customer as possible.

All products are produced according to the highest quality and safety standards (ISO9001). The VMAX products come from an Amfori BSCI audited factory.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>