FLIGHT Bush Pilot Flashlight User Manual
- June 6, 2024
- FLIGHT
Table of Contents
Bush Pilot Flashlight
User Manual
For more information and video demo:
FLIGHTOUTFITTERS.COM
THANK YOU FOR YOUR PURCHASE!
You’re now well equipped to handle all of your cockpit lighting needs. Please
refer to the following manual for user instructions.
WARRANTY INFORMATION
This product is guaranteed against all defects in workmanship and materials
for the original owner for one year from the date of purchase.
For any additional information:
Call us at 513-688-7300, or
Email us at help@FlightOutfitters.com
U.S. Patent: D 659.869 S
FLASHLIGHT OVERVIEW
4X ADJUSTABLE ZOOM & STEALTH RING
The BUSH PILOT FLASHLIGHT is equipped with a 4x adjustable zoom that changes from the spotlight to floodlight with a simple twist of the bezel.
- Short-range: Turn the head of the flashlight clockwise for floodlight, perfect for short-range lighting.
- Long-range: Turn the head of the flashlight counter-clockwise for the spotlight, perfect for focusing light up to 120 meters.
The BUSH PILOT FLASHLIGHT is equipped with the signature orange ring, that will illuminate the four different light modes. To conceal this orange ring, turn the stealth ring clockwise and vice versa to reveal.
LIGHT MODES & SPECIFICATIONS
The BUSH PILOT FLASHLIGHT is equipped with a Smart Select Dial to easily navigate the 5 lighting modes. Simply turn dial to align the arrow with the desired light mode. Light modes can be changed while the light is ON or OFF.
Five light modes
S – STROBE
H – HIGH
M – MEDIUM
L – LOW
SL – STEALTH LIGHT
Strobe: For emergency situations and distress signaling, provides 2.5 hours of
continuous use.
Stealth light: Provides low signature GREEN light from the power button
for low-profile, stealth mode.
RUN-TIME & DISTANCE RATINGS
| STROBE | HIGH | MEDIUM | LOW | STEALTH LIGHT |
|---|
2.5 hrs.
120 meters| 2.5 hrs.
120 meters| 4.5 hrs. 1
85 meters| 13 hrs.
40 meters| 120 hrs.
4 meters
BATTERY CARE & REPLACEMENT
BATTERY ASSEMBLY
- To open the battery compartment, unscrew (counter-clockwise) the end cap where the button and magnetic base are located.
- Remove the old battery, containing (1) pre-installed 18650 Li-ion battery.
- The battery is designed for 500 life cycles. Before replacing with a new battery, make sure the current battery is no longer holding charge. Remove and dispose of the battery properly.
- Insert new battery (NEBO 6698BAT) as indicated by the arrow. Make sure the battery is facing the correct direction (arrow pointing towards the front). Reattach the end cap by turning clockwise.
Note: Use only recommended battery type (NEBO 6698BAT).
CHARGING YOUR USB MOBILE DEVICE
TO REVEAL or TO HIDE THE USB CHARGING PORT: turn the Anti-Roll Tactical ring clockwise/counter-clockwise
USB POWER BANK: Connect a compatible USB cable from your device to the
USB port on the flashlight.
TO ACTIVATE POWER BANK: Hold the flashlight power button for 3 seconds to
activate. 2 GREEN blinking LEDs in the power button will confirm charge mode.
POWER BANK STATUS: When 1 steady RED LED & 1 GREEN blinking LED show,
this indicates that the flashlight battery level is 25% or less. This allows
you to decide to keep charging your device or maintain 25% power in the
flashlight. Flashlight turns OFF at 10% to protect the battery from over-
draining.
TO USE LIGHT WHEN CHARGING: Before connecting the USB cable, turn the
select dial to “L.’ to activate the LOW mode. Turn the dial to any other light
mode to deactivate the light. The only LOW mode can be accessed during
charging.
CHARGING THE FLASHLIGHT
TO REVEAL or TO HIDE THE USB CHARGING PORT: turn the Anti-Roll Tactical ring clockwise/counter-clockwise
-
CHARGING YOUR FLASHLIGHT
CONNECT THE SUPPLIED USB CABLE: One end into any USB port and the other end into the USB port of the flashlight. -
CHARGING MODE: While charging, a steady BLUE LED will come ON in the power button, to indicate the flashlight is charging.
-
CHARGE COMPLETED: Once the flashlight is fully charged (approx. 6.5 hrs), BLUE LED will turn OFF.
-
TO USE LIGHT WHEN CHARGING: Before connecting USB cable, turn the select dial to “L” to activate the LOW mode. Turn the dial to any other light mode to deactivate the light. The only LOW mode can be accessed during charging.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>