LISKA SV-S08 Smart Bracelet Instructions
- June 6, 2024
- LISKA
Table of Contents
LISKA SV-S08 Smart Bracelet
Description
- Bracelet
- Charger.
- Instructions
- Packing box.
Instructions for first use.
Mobile device operating system requirements are IOS 8.0 and above, Android 5.0 and above and Bluetooth 4.0
Search for and download “WearFit 2.0” from the App Store or Play Store.
Or scan the QR code to download the App. You are probably having trouble
opening the link with Wechat or other scanning tools, please copy the link and
open 1t through the search engine.
Activation and installation of the devices
Activate the device by tapping the screen for 3-5 seconds. Align the strap
with the hole of the card on one side of the screen of the bracelet, press the
grip to the left, release the gnp, and enter the hole of the card of the
screen.
Charging: When you can’t activate the device or the battery is low, please charge it in time. Full charge needs 1-1.5 hours
Link to WearFit 2.0
Open “Wearfit 2.0” on your phone and make sure the bluetooth on your phone Is
turned on, then click “Pair bracelet”, and then connect to the “M8”
device, and finally pair the “M8”
NOTE: On Android, just connect the device directly.
The screen interface slides up, switches to the native information interface, and slides down to return to the screen mterface.
Press and hold the screen mterface to enter the selection mode screen, slide the screen left or right, and click the interface to select the screen.
The screen interface slides to the left, changes to the function list interface. Swipe up and down to select the feature, and swipe right to return to the screen interface. In the function list mterface, click a function to enter the secondary function interface. For example: Click on heart rate, and enter the heart rate measurement mterface. On all secondary mterfaces, swipe right to go to the upper mterface, and swipe again to return the display interface.
Specifications
- Screen size 1.3 inch TFT
- Battery capacity 170 mAh
- Battery type Polymer battery
- Operating voltage 3.7V
- Bluetooth Bluetooth 4.0
- Water resistance IP67
- Loading method Clip loadmg
- Sensor G-sensor 3 axis
- Operating time 5-7 days normal use
- Operating temperature -10°C -45°C
- Device size 48mm x 10.8mm x 19.3mm
Electronic product information
Declaration of toxic and dangerous substances in electronic product
information. The device complies with the EU ROHS criteria.
Please refer to the IEC 62321 directive, EU ROHS 2011/65 / eu and review the
directive.
Frequently asked questions
-
Can’t find the bracelet or can’t connect?
Make sure that Bluetooth 1s turned on in the phone and that the phone’s operatmg system 1s Android 5.0 or higher and iOS 8.4 or higher If you still can’t connect, go to Settmgs -Application Management -Authonzation Management -Application Access Authonzation on your phone find “WearFit 2.0” and all perm1ss1ons to allow access. Then go back into the settings to activate the GPS location service, restart the phone, try connecting again.
Make sure the bracelet is fully charged. Feel free to contact us if it doesn’t work normally with the battery charged. -
After pairing the bracelet, does the application show that it is not connected or that the remainmg battery is 0%?
In that case the bracelet and the phone are not connected properly, please pair the devices again. -
Can’t connect the device to the App?
Pull down and refresh the mam interface, the data will be synced manually, then the data can be displayed in the App. Automatic data sync will only sync on the first pairing. The data will then automatically sync every hour. Also, don’t forget to open the data measurement every hour. If it 1s not open, the histogram has no data. -
After updating, no data is displayed.
Go to app settings – restore factory settmgs – turn off smart bracelet – turn on smart bracelet and reconnect to app. The data can be loaded into the application. -
The time is not synchronized.
When the bracelet runs out of battery, the time of the bracelet may be wrong after the battery is recharged. Connect to the phone and the time on the bracelet will automatically sync -
Is the bracelet time not synchronized after connecting to the phone?
Go to phone settings -Application Management – Permission Management – Open App Perm1ss1ons – re-link the bracelet.
Pull down and refresh the mam interface of the App
Warning: Please follow the doctor’s instructions. According to the results, self-diagnosis and treatment is very dangerous, it is dangerous to have blood circulation disorders or blood diseases. Please treatment should be under the supervision of a doctor, the measurement results of this product are for reference only, not for any purpose or medical basis