WEELMOTO 2013 Headlight Installation Guide

WEELMOTO 2013 Headlight

Product Specifications

• Product Name: WEELMOTOTM Headlight Assembly
• Compatibility: 2013-2015 Altima 4-Door Sedan (Not Compatible on Models w/ Factory HID Headlights)

Before Installation

• Professional installation is recommended.
• Do not touch the bulb with bare hands. Oil can affect the lifespan of the bulb. If you accidentally touch the bulb, please clean it with rubbing alcohol and a soft cloth before installation.

Installation Steps

1. Open the hood. Remove the 8 plastic retaining clips in the center.
2. Take out the top six 10mm bolt heads (3 on each side).
3. Locate and remove the 10mm bolt on the inner part of each side. Remove a small plastic bracket on each side.
4. Locate the 10mm bolt in the wheel well that connects the bumper to the fender, and remove it on both sides.
5. Get underneath the car and remove five 10mm bolts. Remove 3 Philips head screws on both sides.
6. Carefully take off the front bumper cover, ensuring all electrical connectors are disconnected before removal. Remove the four 10mm retaining bolts for each headlight. Twist the bulbs counterclockwise to unlock them from the original light and transfer them to the new light (or replace them). Take the WEELMOTO headlight, install bulbs, and reconnect. Reattach all the bolts.

Need Help?

Don’t hesitate to contact us using one of the methods below:

• Click the Ask a Question button on the Seller page
• Email: service@weelmoto.com

Frequently Asked Questions (FAQ)
Q: Can this headlight assembly be used on other car models?
A: No, this headlight assembly is specifically designed for the 2013-2015 Altima 4-Door Sedan and is not compatible with models having Factory HID Headlights.

Product Specification

WEELMOTO™ Headlight Assembly
Compatible with 2013-2015 Altima 4-Door Sedan. Not Compatible on Models w/ Factory HID Headlights

Before Installation

• Professional installation is recommended.
• Do not touch the bulb with bare hands. Oil can affect the lifespan of the bulb. If you accidentally touch the bulb, please clean it with rubbing alcohol and a soft cloth before installation.

Installation Steps

1. Step 1
   Open the hood. Remove the 8 plastic retaining clips in the center.

2. Step 2
   Take out the top six 10mm bolt heads (3 on each side).

3. Step 3
   Locate and remove the 10mm bolt on the inner part of each side.
   Remove a small plastic bracket on each side.

4. Step 4
   Locate the 10mm bolt in the wheel well that connects the bumper to the fender, and remove it on both sides.

5. Step 5
   Get underneath the car and remove five 10mm bolts. Remove 3 Philips head screws on both sides.

6. Step 6
   Carefully take off the front bumper cover, ensuring all electrical connectors are disconnected before removal. Remove the four 10mm retaining bolts for each headlight. Twist the bulbs counterclockwise to unlock them from the original light and transfer them to the new light (or replace them). Take the WEELMOTO headlight, install bulbs, and reconnect. Reattach all the bolts.

Need Help?

Don’t hesitate to contact us using one of the methods below:
Click the “Ask a question” button on the seller page
Or email us: service@weelmoto.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>