Outdoor Products 155591 3L Hydration Reservoir Instructions

: June 7, 2024
: Outdoor Products

Table of Contents

3L hydration reservoir instructions
Using the reservoir
Using the bite valve
- for first time use
- for regular use
Placing the reservoir in the pack
Cleaning and storage
STAY HYDRATED
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

3L hydration reservoir instructions

Outdoor Products 155591 3L Hydration Reservoir

Soft flexible bite valve tip allows for large sips
On/off switch
Pack loop holds reservoir upright
Low profile cap packs easily into bags
Cap tether makes filling easy
Removable hose for easy cleaning

Using the reservoir

Using the reservoir-A Using the
reservoir-B

Unscrew reservoir cap.
Fill the reservoir to desired amount.
Replace cap and securely tighten.
Squeeze reservoir to test seal.

Using the bite valve

Squeeze with heavy pressure

for first time use

Place bite valve between fingers.
Squeeze with heavy pressure 3 to 4 times to open valve.

On_off switch On/off switch

for regular use

Pull bite valve away from hose into “on” on position.
Bite down on valve and sip to drink.
Push bite valve back towards hose to close when not in use.

Placing the reservoir in the pack

step 1 – Once the reservoir is filled, insert it into the hydration compatible pocket. Place bag attachment strap through bladder pack loop at top of cap to secure.

step 2 – Push the tube through the opening at the top of the pack and secure it to the shoulder strap.

step 3 – Pull bite valve away from tube to “open” position. Bite down on the bite valve and sip liquid from the reservoir.

WARNING: Do not allow children under age six to use this hydration system. The bite valve may detach from the tubing, creating a choking hazard.

NO ALCOHOL NO DAIRY temperature A

NO ALCOHOL NO FOOD NO DAIRY -5°F to +120°F -20°C to +50°C

Cleaning and storage

Unscrew bite valve Unscrew hose

Unscrew bite valve from on/off connector.
Unscrew reservoir cap.
Unscrew hose from reservoir.
Scrub all parts with baking soda/water. Shake, empty and rinse.
Put 1 cup water and 1 tsp. lemon juice into reservoir. Shake, empty and rinse.
Make sure parts are dry before storing.

IMPORTANT!!! Before using this reservoir system, make sure that the bite valve & the reservoir are firmly attached to the hose. Failure to do so may result in leaking at these connections. The Outdoor Recreation Group Los Angeles, CA 90008. Additional warranty information can be found on our website, www.outdoorproducts.com/warranties.