KLIM Fusion Bluetooth Headset Instruction Manual
- June 6, 2024
- KLIM
Table of Contents
KLIM Fusion Bluetooth Headset
Overview
Quick pairing guide
- Open the Bluet oath settings on your device and make sure Bluetooth is ON.
- Press and hold the Middle button on the Fusion BT until the light at the back of the controller flashes In red and blue.
- Top the KUM Fusion BT from the list to connect the earphones to your device.
Light Indicator
- Pairing : after pressing the middle button for 3 seconds, the light wlll flash In blue and red, indicating that pairing mode is active. ecannected: once the earphones have been paired to your device, the light will flash In blue.
- Charging : while the earphones are charging, the light wlll turn red. Once charging has finished, the light will turn blue to indicate that the battery is fully charged.
Specifications
Acoustic specifications
- Driver type: Neodymium Magnet Driver (Ø 9 mm)
- Speaker Impedance: 32 Ω
- Rated Output Power: 3 mW
- Max Output Power: 5 mW
- Sensitivity: 100 ± 3 dB (@1kHz)
- L/R Channel imbalance: ≤3dB
- Frequency response: 20Hz ~ 20kHz
Microphone specifications
- Sensitivity: -42 ± 3dB
- Pick-up Pattern: Omnidirectional
- Output impedance: Max 2.2K Ω
- Standard Operation Voltage: 2 V
- Current Consumption: <500 uA
- Signal-to-noise ratio: ≥60 dB
- Max Input sound pressure level: 100 dB
Electronic specifications
- Bluetooth chipset: QCC3034
- Bluetooth version: 5.0
- Supported Bluetooth profiles: A2DP HFP HSP AVRCP
- Wireless range: ≥ 10 m
- Power input: 5 ± 0.25 V DC
- Battery Capacity: 80 mAh
- Operation voltage: 3.0 – 4.2 V
- Charge time: ≤ 2 h
- Continuous music play time: ≥6 h
| Button | Features | Operation | Instructions |
|---|
Middle
| Power on| Hold for 3
seconds
| When the device is off, press and hold for 3 seconds to
turn it on.
Power off| Hold for 3
seconds
| When the device is on, press and hold for 3 seconds to
turn it off.
Pair| Hold for 3
seconds
| Device turns on to pairing mode automatically if there is
no connected device
Play / Pause| Short press| When playing music, short press to pause, short press
again to play
End call| Short press| During a call, short press once to end the current call
Reject call
| Hold for 2 seconds| When there is an incoming call, if you do not want to
answer the call, press and hold for 2 seconds to reject the call.
Phone redial| Double click| In any mode, double- click to redial the last number you
dialed
Answer call| Short press| When there is an incoming call, short press to answer
the call
Volume+
| Volume Up| Short press| Short press to increase the volume. When at maximum
level, a beep is heard.
Skip to next song| Hold for 1 second| While music is playing, Hold for 1 second to skip to the
next track
Volume-
| Volume down| Short press| Short press to decrease volume
Skip to previous song| Hold for 1 second| While music is playing, Hold for 1
second to jump to the
previous track
Multi-Person calls:
Middle
| Answer an incoming call and hang up the
current call
|
Short press
| During a call, when there is an incoming call, short press to connect to the
new call and end the current call.
Answer third party calls and keep the current
call
|
Double click
| During a call, if you receive another call, double click to connect to the third party and keep the current call on
hold
Switch between calls
|
Double click
| While speaking to the second caller, double click to
connect to the original caller and keep the second caller on hold.
Hang up the current call and resume the
held call
|
Short press
| While speaking to the second caller, press once to connect to the original caller and end the other call.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>