naxa NAS-4000 Bluetooth Speaker System Instruction Manual
- June 3, 2024
- NAXA
Table of Contents
Outdoor Rock Bluetooth Speaker
Model No.: NAS-4000
InstructioN Manual
Please ready carefully before use and keep for future reference
Important Safety Information
Before using the speaker, please be sure to follow the following safety tips
to use the speaker.
Please use a charging device and the output voltage does not exceed DC5V,
avoid damage to the product.
Do not fall, throw, squeeze the speaker in order to avoid damage the speaker
(such as: shell damage, scratches on the appearance.
The battery is not fully charged when packing, so suggest charge the device
for at least 1 hour before using.
(The battery life depends on your charging and discharging times and the
operating environment. You can increase the battery life by following
suggestions:)
a) Use the device at least once a week.
b) Do not let the battery run out for a long time (charge the machine at least
once a month when not in use.
It’s best to turn off speaker while charging.
Try to use up the battery before charging, do not charge too offen.
Do not disassemble the product by yourself. Please contact the agent or
customer service of the factory during warranty
WARNING: This product contains lead, a chemical known to the State of
California to cause cancer and birth defects or other reproductive harm. Wash
hands after handing.
OTHER WARNING
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings . Install in accordance with the manufacturers instructions.
- Do not install near any heat sources such radiators ,heat registers , stoves , or other apparatus ( including amlifters ) that produce heat.
- Protect the power cord from being walked on or pinched particularly at plugs , convenience receptacles , and the point where they exit from the apparatus.
Specification
- 3.5mm AUX port
- DC 5V USB Charge port
- Charging Indicator
- Power ON/OFF button : Pause /Paly power on /off
Double press the ON/OFF button switch to TWS connect mode
Bluetooth Version : 5.0V
Battery capacity : 1200MAH
Speaker Power: 5W
Function: Bluetooth /Aux-IN
Play time : 2-2.5 hrs (max volume)
Charging time : 4-4.5hrs
Bluetooth Range: 10M
Bluetooth Frequency : 80-18KHZ
Micro- USB port
Product size : L245W245H254mm
Product weight：around 2.40~2.85kg/pc
Connecting to Power
The speaker bulit-in integrated rechargeable battery , when using , keep the battery full charged to ensure optimal performance and battery life.
This audio is equipped with a 5V / 1A UL standard adapter .
Use the included USB charging cable to connect the speaker to a USB power
source to charge the battery.
- Connect the USB charging cable ( included )to the DC 5V Charging portof the speaker and insert the other end into the 5V/1A adapter or a similar power source。
- Red LED indicator signifies that the unit is charging . Once the unit is fully charged , the LED indicator will turn off .
In order to extend the life of the battery , please do not charge more than 6
hours .
Over charing the speaker can adversely impact the battery life .
Operation
Power ON /OFF
Long press the ON /OFF swith ON /OFF
Bluetooth Connection with Device
- Long press the ON/OFF button with a voice “ Power on” , turn on the devices, blue light flash slowly, you will hear a voice “ The Bluetooth devices is ready for pair”.
- Search the model name “NAXA NAS-4000” click to connect. Then, after a few seconds, the speaker will sound an audio prompt “ The Bluet-ooth devices is connected successfully ” to notify you of a successful connection and blue light long on.
- Emjoying your music time , Palying music with blue light flash slowly.
- If your device requires a password, please enter “0000” to confirm the pairing process.
If connection fails, restart device and do steps 1 & 2 again.
Please note ,this speaker can not swith next/pervious song , you can operate
it on your deivices.
Coming Call Notification
Coming call will sound a voice prompt “ you have call”.
Please note this speaker can not answer/ end, or call back
FCC Notice
This device complles with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)this device may not
cause harmful interference,and (2)this device must accept any interference
received,including interfer-ence that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a class B digital device,pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,uses and
can radiate radiate radiofrequency energy and,if notinstalled and used in
accordance with the instructions,may cause harmful interference to radio
communications.
However, there is on guarantee that interference, will not occur in a
particular installation.if this equipment does cause harmful interference to
radio or television reception reception,which can be-termined by turning the
equipment offand on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on acircuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TVtechnician for help.
CAUTION ON MODIF/CATIONS
Any changes or modications not expressly approved by the grantee of this
device may void the authority granted by the FCC to operate the equipment.
Support
If you have problems with your device, please consult the instructions in this
manual. Please also visit us on the web at www.naxa.com
to get up to the minute news, alerts, and documentation for your device. For
additional assistance.
please contact Naxa Technical Support.
NAXA Technical Support
2320 East 49th St.
Vernon, CA 90058
http://www.naxa.com/naxa_support/
MADE IN CHINA