Naxa NDS-4005 Portable 4″ Bluetooth Party Speaker with Multi-Color Handle Lights-Complete Features/Instruction Guide

Naxa NDS-4005 Portable 4″ Bluetooth Party Speaker with Multi-Color Handle

Lights

Specifications

• Product Dimensions
  6.6 x 4 x 8.2 inches

• Item Weight
  15.5 ounces

• Batteries
  1 Lithium Ion batteries

• Speaker Type
  Full frequency woofer

• Mounting Type
  Tabletop

• Brand
  Naxa Electronic

Introduction

With our portable 4″ party speaker, start the party. Connect to other Naxa Bluetooth devices to wirelessly sync speakers that are up to 33 feet apart. You are sure to enjoy using this product to its fullest thanks to its excellent sound, built-in lighting effects, and simple setup.

CAUTION
 TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK) OF THE UNIT. REFER SERVICING ONLY TO QUALIFIED SERVICE PERSONNEL.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Guard this manual.
3. Obey all alerts.
4. Follow all instructions.
5. WARNING: To prevent fire or shock hazards, do not expose this equipment to rain or moisture. Do not store and operate this product near liquid.
6. Clean only with a dry cloth.
7. Not store and not operate this product near any heat sources such as radiators and heat regis- ters, stove or other appliances (including amplifiers) that produce heat. Keep this product in a well-ventilated place.
8. Not ignore the safety purpose of the polarized or grounding plug. A polarized plug has two blades being wider than the other. A grounding plug has two blades plus a round pin to the ground. The wide blade or the third prong is intended to provide security. If the provided plug does not fit into your outlet, consult an electrician to replace the outlet.
9. Protect all wires connected to this unit from being walked on or pinched, particularly at plugs and the point where the cord exits the unit. When unplugging from the electrical outlet, grasp the plug and do not pull the cord.
10. Disconnect the unit during lightning storms or when a long period is to remain unused.
11. Keep this unit off when connecting all the devices connected to it.
12. After finishing the installation and connections, connect all your equipment with a low volume level. Once all devices are connected, slowly increase the volume or level controls to achieve the nner nnsition.
13. Before placement, installation, assembly, or suspending any product, inspect all equipment, suspension, cabinets, transducers, brackets, and associated equipment. Any missing component, corroded, deformed, or with non-nominal load can reduce the intensity, placement, and arrangement of the installation significantly. Any of these conditions can reduce the security of the facility and must be corrected immediately. Use only suitable equipment for the loading conditions of the installation and that any possibility of reducing term, unexpected overload, never exceeds the capacity of the material or equipment.
14. Consult a licensed professional to install the equipment and make sure that all local, regional and national regulations related to security are understood and adhered to.
15. All services should be performed by qualified professionals. Servicing is required when the apparatus has been damaged in any way, as if having the power cord or its damaged connector, or if the machine breaks contact with liquid or if any object is inserted in the unit or if the unit is exposed to rain or moisture, or if the unit does not operate normally, or has been dropped.

CHARGE THE BATTERY FULLY BEFORE FIRST USE TO OPTIMIZE ITS LIFETIME PERFORMANCE.

IN THE BOX

Upon opening your new dual wireless speakers, first, check to ensure all of the following contents are present:

• Wireless Speaker
• Charging Cable
• User Manual

KEY FEATURES

• 4 Full-frequency speakers pump out room-flling, high-quality audio with ease
• Bluetooth® functionality allows you to wirelessly stream all your favorite music content from Bluetooth-enabled devices in high-quality audio
• Start the party off right with multiple lighting effects and schemes that will leave a lasting impression on all your friends and family
• Lighting effects that dance along with the music and make you want to dance along too
• Connect to another speaker True Wireless Speakers (TWS) allowing you to sync speakers from each other without any wires
• Ensure the fun never has to stop by keeping the speaker at a full charge with the included USB charging cable
• The built-in TF card slot and USB port give you with the option of playing all your favorite audio files with removable storage devices, such as TF memory cards and USB flash drives
• Manually connect to external media devices via the 3.5mm auxiliary input
• Tune in on all your favorite local radio stations thanks to the FM tuner
• Accessories included: User Manual & USB charging cable

PRODUCT OVERVIEW

1. Mode/ Light
2. Track Previous/ Volume Down
3. Play/ Pause / TWs
4. Track Next /Volume Up
5. TF Card Slot
6. USB slot
7. Power ON/OFF
8. DC 5V Charging Pot
9. Mic Input
10. AUX IN Port
11. Charge Indicator

GENERAL FUNCTIONS

1. 4/V-: Short press is the previous song; the hold is volume down.
2. +: Short press is the next song; the hold is volume up.
3. Light/ Mode: Short press is to switch the mode (Aux In-USB/TF-FM-BT); hold is to switch the light effects, double click is control the light On/ Off.
4. Play/Pause: Short press is Play / Pause; In Bluetooth mode, press and hold 5 seconds to re-enter the pairing status. In FM mode, hold to automatically search radio, press to mute in FM and Aux mode

PAIRING A BLUETOOTH® DEVICE

Use Bluetooth® mode to stream music from a Bluetooth® enabled player (e.g., smartphone or tablet device). A device must be paired with the unit before using themn together for the first time.

To pair a Bluetooth® enabled device with the Speaker, follow these steps

1. Make sure Bluetooth® is enabled on your device and that it is next to the unit before attempting to pair it.
2. Turn on the Speaker. Use the Mode button to switch to Bluetooth® mode
3. Use your device to search for nearby Bluetooth devices. The Speaker will be listed as “SOUND PRO NDS-4005”. (This function is usually in the Bluetooth® settings menu; refer to your device’s instruction manual to learn more.)
4. Select “SOUND PRO NDS-4005” from the list of found/available devices. The Speaker will make a confirmation tone upon successful connection.

You can now start playback on your connected device to begin streaming music to the speaker.

TWS FUNCTION

The Wireless speaker allows you to enjoy your favorite audio played over multiple speakers at the same time thanks to the included TWS function. To use the TWS function, follow these steps:

1. Please purchase 2 Bluetooth speakers if you want to use the TWS function.
2. Turn on one speaker, and connect the speaker via Bluetooth to your device. You should see “‘SOUND PRO NDS-4005” in the list over Bluetooth devices.
3. Turn on the second speaker, then long press 1 second on the button with the TWS marking. You will hear a tone sound, the devices are connected in TwS mode. You can now enjoy True Wireless Stereo (TWS)’ for Stereo Audio Experience
4. To disconnect the speaker from TWS, press and hold the TWS button on the first speaker.

USB MODE

The Wireless speaker allows you to enjoy your favorite audio played from external storage devices, such as USB flash drives. To use do so, follow these steps:

1. Insert the USB into the USB port.
2. Press the “Play/Pause” button to start or stop playback. Briefly press the /V-or
   IV+button to skip to the previous or next song. Press and hold the I4/V-or
   V+ button to decrease or increase the volume.

NOTE
 When a USB flash drive is inserted into the USB port, the unit will automatically switch to USB mode and begin playing Mp3 audio files from the inserted USB flash drive. You can also enter USB mode by pressing the “MODE” button to cycle through modes.

TF MODE

The Wireless speaker allows you to enjoy your favorite audio played from external storage devices, such as TF cards. To use do so, follow these steps

1. Insert the IE card into the IF card slot.
2. Press the “Play/Pause” button to start or stop playback. Briefly press the /V- or
   IN+button to skip to the previous or next song. Press and hold the I44/V-or
   V+ button to decrease or increase the volume.

NOTE
 When a TF card is inserted into the TF card slot, the unit will automatically switch to T mode and begin playing Mp3 audio files from the inserted TF card. You can also enter TF mode by pressing the “MODE” button to cycle through modes.

FM RADIO

The Wireless speaker allows you to enjoy your favorite local FM radio stations. To use do so, follow these steps

1. Press the MODE button to change to FM radio mode.
2. Press the “Play/Pause” button to automatically search for available FM channels.
3. Once the scan is complete, you can use the I44/V-or IN+ button to search the previous or next stations. Press and hold the l4N-or IV+ button to decrease or increase the volume.

AUX INPUT

The Wireless speaker allows you to enjoy your favorite audio played from external devices that don’t have Bluetooth® capabilities via the auxiliary input. To use do so, follow these steps:

1. Insert an auxiliary audio cable (not included) into the AUX input on the speaker.
2. Plug another end of the audio cable into the desired external media device’s AUX input

BATTERY

1. When in low power mode that requires charging, speaker volume will automatically fall to about 70% of the main volume.
2. Use a USB charging cable for charging, the charging indicator light will turn on when the product is being charged.
3. Upon reaching a full charge, the charging indicator light turns off.

NOTE
 If the speaker is not used for a prolonged period of time, charge the speaker for more than 12 hours; otherwise, it will cause damage to the battery.

Frequently Asked Questions

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>