techtop IL80T Professional HIFI Silent Disco Transmitter Instructions
- June 6, 2024
- techtop
Table of Contents
Headphones TX
Wireless Transmitter For Headphone – IL80T
IL80T
Professional HIFI Silent Disco Transmitter With Multiple Channels
Please read the manual carefully before using it!
Description
- T80 Transmitter is a BRAND NEW HIFI silent disco transmitter, professional design with LED display which can indicate the multiple channels, 5 dBi Omni antenna and
- embedded 3.7 V/1000 mAh lithium battery, enabling 5 hours continuous battery operation time.
- The frequency of the transmitter can be preset as 798 MHz or 801 MHz or 805 MHz etc.
- Both 3.5 mm MIC input jack and RCA audio input jacks are available.
Transmitter Outline & Appearance
Function Description
Operation Steps
Step 1: Plug the 9V adaptor in the wall socket or switch on the power strip, and then plug the adaptor in the power strip.
Step 2: Connect transmitter’s RCA audio input jack to any audio source
with 3.5mm audio or RCA audio output jack, like DJ’s, iPod, iPad, iPhone, PC,
DVD, etc, and play the music.
Step 3: Plug in the adaptor to the transmitter, then switch on the
transmitter, and to “Hi” position (high power mode).
Step 3: Turn on the headphone by pressing the power button for 3 Seconds until the small LED indicator glows in red. Once the headphone is turned on, it will automatically search and stay on the broadcasted channels.
Please note: The transmitter is designed with the TUNE button, you can press this TUNE button to switch to any preferred channel. Once the transmitter is switched to a new channel, accordingly, we need to press the headphone’s ON/OFF/TUNE button quickly to select and stay at the new channel.
Specifications
• Voltage: 9 VDC/3.7 V lithium.
• Electronic Current: 200 mA (TYP).
• Electronic Current:
Low: 200 mA (TYP).
HI: 450 mA (TYP).
• Antenna gain: 5 dBi.
• Modulation: FM.
• Frequency response: 30 Hz – 15 kHz.
• Modulation Frequency offset: 50 kHz/600 m Vrms.| • Power-on Sensitivity: 60
m Vp-p (TYP).
• Automatic level control sensitivity: typical 700 m Vp-p.
• Automatically power off when no signal is received for 10 minutes (TYP).
• Embedded lithium battery capacity: 1000 mAh.
• Charge current: 350 mA.
• Charge time: Less than 4 Hours.
• Lithium battery work time: 5 Hours (TYP).
• Effective work distance in open space: 300 m.
---|---