TECHTOP PAR 9 II Stage Light User Manual
- June 6, 2024
- techtop
Table of Contents
TECHTOP PAR 9 II Stage Light User Manual
SAFETY INSTRUCTIONS
CAUTION!
Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric shock when touching the wires!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
For your own safety, please read this user manual carefully before you initial start-up.
Features:
PAR 9 II:STAGE LIGHT is one of the classical LED fixtures designed and created uniquely, really ideal for theaters, churches, TV studios, photography studios, fashion shows, stage performances, musical shows, etc.
*LED display;
Installations:
Regardless the rigging point you choose for your fixture, always be sure to secure the fixture with a safety rope which sold separately.
DMX-512 connection / connection between fixtures
Occupation of the XLR-connection:
If you are using controllers with this occupation, you can connect the DMX- output of the controller directly with the DMX-input of the first fixture in the DMX-chain. If you wish to connect DMX-controllers with other XLR-outputs, you need to use adapter-cables.
Building a serial DMX-chain:
Connect the DMX-output of the first fixture in the DMX-chain with the DMX- input of the next fixture. Always connect one output with the input of the next fixture until all fixtures are connected.
Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a 120 resistor between Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the last fixture.
Connection with the mains
Connect the device to the mains with the enclosed power supply cable.
1. DMX 512 protocol
Addressing
The LED DISPLAY on the rear side of the base allows you to assign the DMX fixture address, which is defined as the first channel from which the item will respond to the controller. If you set, for example, the address to channel 7, the item will use the channel 7 to 14 for control. Please, be sure that you don’t have any overlapping channels in order to control each item correctly and independently from any other fixture on the DMX data link. If two, three or more items are addressed similarly, they will work similarly. At DMX mode you can choose the address from 1 to 512.After you connect the item to the mains, the item starts running. When the item finishes resetting, A-OO1 will flash in the led display and then set the desired DMX address by pressing the UP or DOWN buttons.
DMX Controlling:
After having addressed all items, you may now start operating these via your lighting controller. After switching on, the item will automatically detect whether DMX 512 data is received or not.
DMX FUNCTIONS
8-CHANNEL MODE
Channel 1 – master dimmer from darkness to full brightness
Channel 2 – red from darkness to full brightness
Channel 3 – green from darkness to full brightness
Channel 4 –blue from darkness to full brightness
Channel 5 – white from darkness to full brightness
Channel 6 –strobe
Channel 7 –preset shows
0-50 CH1-CH6
51-100 COLORS
101-150 COLOR CHANGING
151-200 color fade
201-250 pulse color changing
251-255 sound active
Channel 8 –running speed
running speed adjustments when ch7 at 101-250
Color selections when ch7 at 51-100
4-CHANNEL MODE
Channel 1 – red from darkness to full brightness
Channel 2 – green from darkness to full brightness
Channel 3 –blue from darkness to full brightness
Channel 4 – white from darkness to full brightness
2. auto
Press the MODE button, the following functions can be achieved by the button
ENTER:
CL01-08:color selections；
CC01-15: color changing from slow to fast;
DE01-15: color fade I from slow to fast;
CP01-15: color fade II from slow to fast;
3. sound active
Press the MODE button, till SOUD appears, confirm SOUD by the button ENTER, the item will run to the beat of music.
4. Synchronization & master /slave mode
Take one item and set the item at auto or sound active as above, then get other items and press the button MODE, set at A001, confirm by the button of ENTER, then connect the items at A001 to the item at AUTO or sound active, disconnect the items from DMX controller, the items will work simultaneously. The item at auto or sound active works as master, others as slave.
LED DISPLAY CONTROL
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuse holder on the rear panel with a fitting
screwdriver.
Step 2: Remove the old fuse from the fuse holder.
Step 3: Install the new fuse in the fuse holder.
Step 4: Replace the fuse holder in the housing.
TECHNICAL SPECIFICATIONS
One of the classical LED fixtures designed and created uniquely, really ideal for theaters, churches, TV studios, photography studios, fashion shows, stage performances, musical shows, etc.
LED display;
Equipped with 9high MCD RGBW 4 IN 1 LEDs 8W , total MAX. 72W, 50,000 hours
AC 100-240V 50/60Hz
Power consumption: max. 80W
beam angle 25°
0-100% linear dimming, separate strobe
DMX 512 protocol, master/slave, auto, sound active with adjustable sound
sensitivity
4/8 DMX channel modes
Displaying off 5 seconds automatically after finishing sets of the fixture
Environmental temperature: -20℃ to 40℃
Hanging brackets included: floor stand
Net weight: 1.10kgs
Dimensions: 27023060mm(LW*D)(hanging bracket placed vertically)
Please note: Every information is subject to change without prior notice.
Documents / Resources
|
TECHTOP PAR 9 II Stage
Light
[pdf] User Manual
PAR 9 II, Stage Light
---|---