Dual Electronics DS693 Car Speakers Operational Guide
- October 27, 2023
- Dual Electronics
Table of Contents
Dual Electronics DS693 Car Speakers
Getting Started
Thank you for purchasing the DS Series car speakers. Although Dual has attempted to make sure all of the information contained within this manual is accurate, please be aware that any part of it is subject to change without notice.
Safety
CAUTION
This symbol is intended to alert the user to the presence of important
instructions. Failure to heed these instructions can result in injury or unit
damage.
CAUTION
To prevent injury and damage to the unit, please read and follow the
instructions in this manual.
CAUTION
If you feel unsure about installing this system yourself, have it installed
by a qualified audio technician.
CAUTION
Before installation, disconnect the battery negative (-) terminal to
prevent damage to the unit, fire and/or possible injury.
CAUTION
The following installation instructions are very basic. If you feel unsure
about personally installing this speaker system, Dual recommends acquiring the
services of a professional car audio installation center.
Before installation, please follow these guidelines:
- Be sure to carefully read and understand the instructions before attempting to install this product.
- For safety, disconnect the negative terminal from the battery prior to beginning the installation.
- For easier assembly: If additional wiring is required, we recommend running all wires prior to mounting your speaker in place.
- Use the highest quality connectors for a reliable installation and to minimize signal or power loss.
- Use caution before you drill or cut! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle.
- Never run speaker wires underneath your vehicle. Running speaker wires inside the vehicle provides the best protection from exhaust heat and environmental elements.
- Avoid running wires over, near, or through sharp edged surfaces. We suggest you also use rubber grommets to protect any wires routed through metal.
- When running the speaker cable from the amplifier, avoid running it near sources of high current (i.e. wiring harnesses, battery cables).
Mounting
- Determine where the speakers will be mounted. Make sure the area is large enough for the speaker to mount evenly. Also ensure the mounting location is deep enough for the speaker to fit.
- Refer to the specification chart to determine the proper diameter hole to cut for your speaker model.
- If needed, use the grille as a template to mark the locations for the mounting screws. Drill the holes with a 3/32″ bit.
- Be sure to observe proper polarity when connecting the wires. The speaker’s positive terminal is indicated with a “+” symbol.
- Fit the speaker to the hole cut-out. Mount the speaker using the supplied screws. If the speaker grill is to be used, insert 4 screws into the grill holes and then mount the speaker.
Standard Rear Deck Installation
Standard Door Installation
Specifications
The diagram featured above is to be used in conjunction with the specifications matrix guide below:
Limited One Year Warranty
This warranty gives you specific legal rights. You may also have other rights
which vary from state to state.
Dual Electronics Corp. warrants this product to the original purchaser to be
free from defects in material and workmanship for a period of one year from
the date of the original purchase.
Dual Electronics Corp. agrees, at our option, during the warranty period, to
repair any defect in material or workmanship or to furnish an equal new,
renewed or comparable product (whichever is deemed necessary) in exchange
without charges, subject to verification of the defect or malfunction and
proof of the date of purchase. Subsequent replacement products are warranted
for the balance of the original warranty period.
Who is covered?
This warranty is extended to the original retail purchaser for products purchased and used in the U.S.A.
What is covered?
This warranty covers all defects in material and workmanship in this product. The following are not covered: installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product.
What to do?
-
Before you call for service, check the troubleshooting guide in your owner’s manual.
A slight adjustment of any custom controls or connections discussed in your instruction booklet may save you a service call. -
If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center.
-
Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment.
-
For more information and for the location of the nearest authorized service center please contact us by one of the following methods:
Call us toll-free at 1-866-382-5476
E-mail us at [email protected]
Exclusion of Certain Damages:
This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company’s negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental or consequential damages.
FAQs
Are 2-way coaxial speakers necessary to have crossovers?****
You usually don’t need a second crossover if your car’s audio system uses coaxial speakers. Before frequencies reach each driver, passive crossovers found in full-range speakers have already filtered them. The built-in speaker crossovers ought to be more than plenty, even if you add an amplifier.
Dual DS693 2 way coaxial speakers: How effective are they?****
The sound quality is usually higher if a signal is solely split into high frequencies and low frequencies. Due to their affordability and ease of installation, especially when compared to 3-way speakers, 2-way speakers are the most practical choice for the majority of automobile speakers.
How are the two DS693 coaxial speakers designed to work?****
In professional audio, coaxial loudspeakers allow sound from two drivers to emanate from a single source. When compared to loudspeaker enclosures with physically isolated drivers, this property enables a larger field of listening to a synchronised summation of speaker drivers.
How do the Dual DS693 2-way vehicle speakers work?****
The woofer and the tweeter are two distinct types of drivers found in 2-way speakers. A speaker known as a woofer is meant primarily to reproduce low- frequency sounds, whereas a tweeter is designed to reproduce high-frequency sounds. The midrange, woofer, and tweeter drivers, also referred to as the 3-way speaker, are what generate sound.
Dual DS693 two-way speakers have bass, right?****
Yes, because they have a separate woofer, two-way speakers are great for bass. The woofer handles low frequency, but if you want to enhance your listening experience, you can choose to add a second subwoofer to augment the low bass tones.
Is it best to use a pair of DS693 coaxial speakers?****
In conclusion, compared to the single-cone speakers found in OEM cars, coaxial speakers provide far greater sound quality and coverage. Compared to two-way speakers, coaxial speakers can also be three-way, but they are less popular.
Are Dual DS693 2 speakers any louder?****
It will indeed be noisier. The simplest situation is that you would really get four times the intensity if you could repeat the precise signal over space because intensity adds quadratically rather than linearly to sound waves.
Is it possible to use two Dual DS693 2 speakers at once?****
You might be possible to simultaneously connect to two Bluetooth speakers, depending on the hardware you have. Modern technology enables for simultaneous connecting with two devices thanks to Bluetooth 5, a feature. Comparable solutions have been produced by other device manufacturers.
The Dual DS693 coaxial vehicle speakers’ quality is how good?****
In conclusion, compared to the single-cone speakers found in OEM cars, coaxial speakers provide far greater sound quality and coverage. Despite being more uncommon than 2-way speakers, 3-way coaxial speakers do exist.
Need a crossover for Dual DS693 2-way coaxial speakers?****
You usually don’t need a second crossover if your car’s audio system uses coaxial speakers. Before frequencies reach each driver, passive crossovers found in full-range speakers have already filtered them. The built-in speaker crossovers ought to be more than plenty, even if you add an amplifier.
What functions do the Dual DS693 coaxial speakers perform?****
In professional audio, coaxial loudspeakers allow sound from two drivers to emanate from a single source. When compared to loudspeaker enclosures with physically isolated drivers, this property enables a larger field of listening to a synchronised summation of speaker drivers.
Do Dual DS693 coaxial speakers have crossovers?****
Coaxial speakers are not commonly marketed with passive crossovers. Instead, they employ a straightforward filter to prevent low frequencies from reaching the tweeter. Frequently, this filter is attached to the back of the speaker.
Are the Dual DS693 coaxial speakers full-range?****
Because coaxial speakers can reproduce a wider range of audio frequencies from a single speaker, they are commonly referred to as “full-range” speakers. The drivers in these speakers are identical to those in component speakers, however they were merged to save space and money.
Do the Dual DS693 coaxial speakers have bass?****
Coaxial speakers are compact speakers with a single driver for the mid-bass, tweeter, and crossover. They are especially well-liked since they are significantly simpler to install than component sets and take up less space.
How are the two DS693 coaxial speakers wired?****
The core conductor wire needs to be connected to the red (or positive) connector on the speaker. With the same colour of wire, hold the opposite end in your hands and attach it to the port on the amplifier or receiver.
What kind of speakers—coaxial or component—does the Dual DS693 arrangement employ?****
Coaxial speakers are speaker systems that include a tweeter, a crossover, and a crossover all in one, in contrast to component speakers. Compared to component speakers, they are less expensive and easier to install, but they provide much less variety and sound quality.