IKOHS Force 3D 1500 Blender User Manual

: June 6, 2024
: IKOHS

Table of Contents

IMPORTANT SAFEGUARDS
PARTS LIST
CONTROL PANEL
OPERATION INSTRUCTIONS
KEY POINTS
CLEANING AND MAINTENANCE
STORAGE
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

FORCE 3D 1500 / 1800
BLENDER – BATIDORA
USER MANUAL

WELCOME
Thank you for choosing our blender. Before using the appliance, and to ensure the best use, carefully read these instructions.
The safety precautions enclosed herein reduce the risk of death, injury, and electrical shock when correctly adhered to. Keep the manual in a safe place for future reference, along with the completed warranty card, purchase receipt, and package. If applicable, pass these instructions on to the next owner of the appliance. Always follow basic safety precautions and accident prevention measures when using an electrical appliance. We assume no liability for customers failing to comply with these requirements.

IMPORTANT SAFEGUARDS

When using any electrical appliance, basic safety precautions should always be observed.

This product is intended for household and indoor use only. Do not use this product for commercial purposes, and do not use it outdoors.
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
This product shall not be used by children. Keep this product and its power cord out of reach of children.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
When cleaning the appliance please use a dry cloth, do not use water to clean the motor base, it may cause a potential injury from misuse.
The blade accessory is very sharp, please pay attention when handling the sharp cutting blades during cleaning, emptying the bowl, and user maintenance.
Be careful if hot liquid is poured into the product as it can be ejected out of the appliance due to a sudden steaming.
Always switch off the product and disconnect from the supply if it is left unattended and before assembling, disassembling, cleaning, or approaching parts that move while in use.
Do not immerse the product or allow the supply cord and plug to come into contact with water or other liquid.
The use of accessory attachments, including canning jars, not recommended by the appliance manufacturer may cause a risk of fire, electric shock, or injuries to persons.
Do not let the cord hang over the edge of a table or counter or touch hot surfaces.
Do not place on or near a hot gas or electric burner or in a heated oven.
You must have extreme caution when moving an appliance containing hot oil or other hot liquids.
Where applicable, always attach a plug to the appliance and check that the control is OFF before plugging the cord into a wall outlet. To disconnect, turn the control to the OFF position, then remove the plug from the wall outlet.
Do not use the appliance for other than intended use.
Avoid touching moving parts.
Keep hands and utensils out of the container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running.
Do not use the product if the blade is curved or damaged.
Never operate the product without any liquid in the jar or empty.
Never try to defeat the interlock switch mechanism, make sure the accessory is completely installed before operation.
Do not overfill the jar.
Always operate the blender with its cover in place.

CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility. If the thermal cut-out operates during usage, please switch off the product and unplug it from the electric supply, and let the product cold down before use.
WARNING: Do not try to remove the blending jar from the motor base during operation or if the blade is still rotating. After using the product, let the blade stop rotating, and then pick up the jar from the motor base.

PARTS LIST

Measuring lid
Lid
Glass jar
Blade holder
Sealing ring
Jar base
Main unit
Control panel

CONTROL PANEL

OPERATION INSTRUCTIONS

Rotary knob: “OFF” means that the mixer is turned off. From “MIN” to “MAX” is the speed control.
Pulse function button: Press and hold the button and the product will operate at maximum speed while holding down the button.
Program Function Button (in the Force 3D 1800 model): 3 different operating modes: “ice crush”, “easy clean”, “smoothie”. Turn the rotary knob to “ON” and select the desired program. Press the corresponding button and the mixer will start at the preset speed. If you press another function button, the product will enter the pressed function mode.
The maximum capacity of the jar is 1.8 I, do not exceed the maximum level mark.
This blender is not allowed to work empty, we suggest 2 parts of soft fruit and 3 parts of water (only soft fruit, such as carrots, apples, etc.), and the operating time should not exceed 2 minutes.

KEY POINTS

Blending jar: 1.8 I capacity, glass, Grade 420 stainless steel blade, food contact grade material.
Measuring lid: 85 ml capacity.
Speed: 22000 rpm high speed, good performance assurance.
Noise: less than 85 dB (1 meter from the product, background noise less than 65 dB).
Protection:
Safety switch: If the blending jar is not in a position or removed during working time, the product will not work. You need to put the blending jar in position, rotate the knob to “0” position, and then start to use the product;
Overheat protection: If the product is overloaded while working for a long time, the thermal limiter will stop the product to protect the motor from overheating. If the thermal limiter starts, please reduce the load of the blend-ing jar, and wait for almost 30 min to let the motor cool down, and then use the product again. If the LED light is still flashing, but the product is still not working, wait for 10 to 20 min more.
Overcurrent protection: If you are blending very hard food (or very big food) incorrectly, the blade may block and the current limiter will stop the product. If the current limiter starts, please switch off the product and remove the very hard or very big food, and then use the product again.

CLEANING AND MAINTENANCE

Before cleaning, make sure the power switch and speed regulator is in the “0” position, remove the plug from the electric supply.
You can use water to clean the blending jar, but not chemical agents or other liquids.
Use an only a dry cloth to clean the motor base, never use a wet cloth or immerse the motor base into water.
If the product is operating with abnormal noise, or shaking seriously, please stop using this product, and send it back to the service agent to check it. Never repair the product by yourself.

STORAGE

After using the product, please repack it, and store it in a dry place and avoid sun exposure.
Make sure the children cannot reach the product. • Make sure the product is dry before repacking.

| Characteristics
---|---
Power| 1500W
Capacity| 1.8L
Weight| 4.2kg
Dimensions| 432x187x201mm
| Characteristics
---|---
Power| 1800W
Capacity| 1.8L
Weight| 4.5kg
Dimensions| 432x187x201mm

In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in electric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that have reached the end of their useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated, and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user involves the application of administrative sanctions according to the laws.

Made in P.R.C.