Xtrfy K4 Series Mechanical Keyboard Owner’s Manual
- June 6, 2024
- Xtrfy
Table of Contents
Xtrfy K4 Series Mechanical Keyboard Owner’s Manual
PLUG-AND-PLAY
Connect the K4 to the USB port. Driver installation starts automatically.
SETTINGS AND FUNCTIONS
The K4 features a range of customization options and convenient quick keys. All settings are made directly on the keyboard, by pressing the FN key + the desired setting key.
RGB ILLUMINATION
Press FN + INS to start a cycle of shifting backlight colors.
Press FN + PGUP for LED illumination in 6 color zones. To set the color of each zone, press FN + PGUP again. When the NUM, CAPS and SCROLL lights in the upper right corner blink, press FN + the numbers 1–6 repeatedly to adjust the colors. When you’re done, press FN + PGUP again.
Press FN + DEL repeatedly to switch between two different wave effects.
Press FN + PGDN to start a multi-color typing effect. (Visible when typing.)
Press FN + the up/down arrow keys to increase/decrease the brightness of the LED lighting.
Press FN + the left/right arrow keys to decrease/increase the speed of the LED effects.
OTHER USEFUL KEYS AND SHORTCUTS
FN + = Lock Windows key
FN + F1–F8 = Media controls
FN + F9 = E-mail
FN + F10 = Web browser
FN + F11 = Lock all keys
FN + F12 = Calculator
TROUBLESHOOTING
» Make sure the K4’s USB connector is firmly attached to your computer’s USB
port.
» Connect to another USB port.
» Connect to another computer.
» Factory reset the keyboard by pressing and holding the FN key + backspace
for 10 seconds.
NEED BACKUP?
If you have any questions, we’re never more than an email away. Contact us at
[email protected]
CHECK OUT MORE XTRFY PRODUCTS AT XTRFY.COM