ATEQ VT15 Trigger Tool for TPMS User Manual
- June 6, 2024
- ATEQ
Table of Contents
QUICK USER MANUAL
VT15
TRIGGER TOOL FOR TPMS
1 – Put the VT15 in front of the tire near the sensor
|
2 –
Start the cycle by pressing and releasing the left key (TX1)
---|---
3 – The result can be immediate to 50 seconds
|
4 – Stop the cycle by pressing the right key
(TX2)
- The cycle stops itself after 50 seconds
Low Bat light on (TX2)
|
Replace the battery with a similar
|
**Do not dispose of the battery to the dustbin***
---|---|---
The crossed-out wheeled dustbin means that within the EU the product must be
taken to separate collection at the product end-of-life.
For all updates, manuals, and information see the following link: www.ateq-
tpms.com
EU Declaration of Conformity (DoC)
Company name: ATEQ
Postal address: 15 rue des Dames
Postcode and City: 78340 Les Clayes sous Bois
Telephone number: 01 30 80 10 20
E-Mail Address: info@ateq.com
declare that the DoC is issued under our sole responsibility and belongs to the following product:
Apparatus model/Product: TPMS (Tire-pressure monitoring system) Tool
Type: VT15
The object of the declaration
The object of the declaration described above is in conformity with the
relevant Union harmonization legislation: Radio Equipment (RED) Directive
2014/53/EU
References to the relevant harmonized standards used or references to the
other technical specifications in relation to which conformity is declared: EN
61010-1:2010, EN 61326-1:2013, EN 301 489-1 V2.2.3, EN 300 220-2: V3.2.1, EN
300 330 V2.1.1
Non-harmonized standards: EN62479:2010
Signed for and on behalf of Place and date of issue
Mr Jacques MOUCHET, Chairman and CEO
30 Nov. 2020
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>