ATEQ Quickset X TPMS Activation and ECU Reset Tool Includes OBD Cable User Manual

Quickset X

USER MANUAL

TOOL INFO & SAFETY

A. SPECIFICATIONS

Storage: -4° F to 131° F (-20° C to +45° C).

B. SAFETY INFORMATION

Do not discard. Retain for future reference.
This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions:
(1) This device will not cause harmful interference, and
(2) This device will accept any interference received, including
Interference that may cause undesired or improper operation.
WARNING: This product emits electromagnetic and electronically generated waves that may interfere with the safe operation of pacemakers.
Individuals that have pacemakers should never use this product.
WARNING:
Do not use live electrical circuits.
Must read instructions before use.
Wear safety goggles. (User and bystanders).
Risk of entanglement.

TOOL CONTROLS

1. ____Antenna
2. _____Display
3. __Result Lights
4. ____Cancel Button
5. ____Trigger Button
6. _____Directional Buttons
7. ____OK/Enter Button
8. _____Power Button
9. _____USB/Charging Port
10. ____OBDII Port

TOOL TIPS

When triggering sensors, position the tool’s antenna on the sidewall of the tire near the valve. Press the button to trigger the sensor.

The OBD Quick Connector is needed to perform OBD vehicle relearns, Plug the OBDII cable into the tool, and the other end into the vehicle with the ignition ON. Sensor data cannot be transferred while the ignition is in the OFF position.

GETTING STARTED

OBDII RELEARN.

MANUAL RELEARN

TOOL SETTINGS

not in use.
LANGUAGE:| Select the tool’s language*
ABOUT:| View various tool information such as Serial#, Software
Version, Software License Expiration, and more.

*The Quickset X offers the following languages: English, Spanish, French, German, Croatian, Italian, Hungarian, Dutch, Norwegian, Polish, Portuguese, Romanian, Slovak, Slovenian, Finnish, Swedish, Turkish, Greek, Russian, Hebrew, Czech, and Danish.

UPDATING THE TOOL

1. Visit webvt.ateq-tpms.com or quicksetx.com to download the WebVT update software.

2. Open the installation file and follow the on-screen instructions to install the software. (you may find this file downloaded to your “Downloads” folder on your PC)

3. Connect your tool to your PC with the power ON.
   

4. Open the software, then select the “Update Tool” option.
   

5. After 10-15 minutes, the tool will be up-to-date.
   

LEGAL INFO

Warranty
Limited Hardware Warranty
ATEQ warrants to the original purchaser that your ATEQ hardware product shall be free from defects in material and workmanship for the length of time, identified on your product package and/or contained in your user documentation, from the date of purchase. Except where prohibited by applicable law,  his warranty is non-transferable and is limited to the original buyer. This warranty gives you specific statutory rights, and you may also have other rights that vary under local laws.

Remedies
In the event of a breach of the warranty, the sole responsibility of ATEQ and your sole remedy consists, at ATEQ’s choice, in repairing or replacing the hardware. Shipping and handling charges may apply unless prohibited by the applicable law. To repair or replace any hardware, ATEQ may, as it chooses, use parts that are new, restored, or already used but in good working order. Any replacement hardware product will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer, or for any additional period of time that may be applicable in your jurisdiction.  This warranty does not cover problems or damage resulting (a) from accidents, abuse, incorrect use or any repair, any modification or any unauthorized disassembly; (b) from inappropriate use or maintenance, use not in compliance with the instructions of the product or from connecting to the power supply with incorrect voltage; or (c) from use of consumables, such as replacement batteries, not supplied by Atiq, apart from where such restriction is prohibited by the applicable law.

How to Obtain Warranty Support
Before submitting a warranty claim, we recommend you visit the technical support section of our website at https://www.ateq-tpms.com/ for technical assistance. Valid warranty claims are generally processed through the point of sale during the first thirty (30) days after purchase. However, this period of time may vary depending on the place of purchase. Contact ATEQ or the retailer who sold you the product to get more details. Warranty claims that cannot be processed through the point of sale and any other product-related questions should be addressed directly to ATEQ. The addresses and contact details of ATEQ’s customer services are given in the documentation provided with your product, and on the internet at  https://www.ateq-tpms.com/.

Limitation of Liability
ATEQ SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, OR ACCIDENTAL DAMAGE WHAT- SOEVER, INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS, REVENUE OR DATA (WHETHER DIRECT OR INDIRECT) OR COMMERCIAL LOSS FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON YOUR PRODUCT, EVEN IF YOU HAVE NOT BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Some jurisdictions do not allow the exclusion or limitation of special, indirect, or accidental damage, and so the above limitations or exclusions may not apply to you.

Duration of Implied Warranties
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS ON THIS HARDWARE PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THE APPLICABLE LIMITED WARRANTY PERIOD FOR YOUR PRODUCT. Some jurisdictions do not allow limitations on how long an implied warranty lasts, and so the above limitation may not apply to you.

National Statutory Rights
Consumers have statutory rights under applicable national legislation governing the sale of consumer
goods. Such rights are not affected by the warranties in this Limited Warranty.

No Other Warranties
No ATEQ dealer, agent, or employee is authorized to make any modification, extension, or addition to this
warranty.

Warranty Period
The warranty period for ATEQ tools is one year.

Safety precautions
You must read and understand these safety precautions and warnings before using or charging your Li-Po batteries.

Operating environment
Remember to always follow any specific regulations in force in your sector of work, and to switch off your device when its use is prohibited, or when it may cause interference or danger. Only use the tool in its normal operating position.

About charging
Only use the power supply provided with your VT56. The use of any other power supply may damage the tool and/or be dangerous. When the red LED goes off and turns green, charging is finished.

About the charger
Do not use this charger in wet environments; never touch the charger if your hands or feet are wet. Allow sufficient space around the charger for ventilation when you use it to power or recharge the tool’s battery. Do not cover the charger with objects liable to affect cooling. Do not use this charger inside a bag. Connect the charger to a suitable power outlet. Do not use the charger if it is damaged or if its power lead is damaged. Do not disassemble the charger and do not modify any of its parts. Do not attempt to repair the charger. It does not contain any part that can be repaired. Replace the charger if it has been damaged or exposed to excess moisture. Do not try to use it as a power source.
Unplug it before undertaking any cleaning or care.

About the battery
CAUTION: This device contains a Li-Po battery. It can explode and release hazardous chemicals. To reduce any risk of fire or burns, do not disassemble, crush, pierce or dispose of the battery or the tool in fire or water, and do not short-circuit or short the contacts with a metal object. Always use the power supply approved by ATEQ and supplied with the device.
The tool must be returned to the factory for battery replacement.
Opening the tool or tampering with or breaking the seal placed on the tool will invalidate the warranty.

Safety instructions for Li-Po battery use

The VT56 must be placed on a non-flammable surface during charging (ceramic tray or metal box).
Only charge the Li-Po battery WITH the specific charger provided.
If the battery begins to overheat more than 60°C (140°F), STOP CHARGING IMMEDIATELY. The battery must NEVER exceed 60°C (140°F) during the charging process.
NEVER charge a battery pack immediately after use and while it is still hot. Let it cool down to room temperature.
If you see any smoke or liquid coming out of the battery, stop charging immediately. Disconnect the battery from the charger and place the battery in an isolated area for at least 15 minutes. STOP USING THE BATTERY, and return the device to your dealer.
Always keep a fire extinguisher for electrical fires within reach while charging the battery. In the unlikely event that the Li-Po battery catches fire, DO
NOT use water to extinguish the fire, use sand or the extinguisher described above.
The parts of a Li-Po battery must be neutralized out of use.
The neutralization procedure must be carried out within very strict safety parameters.
You are recommended to contact a specialist in this battery type to carry out this process.
They will have the out-of-use battery collected by a specialized recycling organization.
Alternatively, contact your dealer.
Do not dispose of Li-Po batteries with household waste.
To avoid leaks or other hazards, do not store batteries above 60°C. Never leave the battery inside a car (for example) where the temperature could be very high or in a place where the temperature might exceed 60°C. Store the battery in a dry place to avoid contact with any type of liquid. Store the battery only on a non-flammable surface that is heat resistant and non- conductive, and away from any flammable materials or sources.
A Li-Po battery must be stored with a minimum charge of 30%. If you store the battery completely discharged, it will quickly become unusable. If it has to be stored for a long period (over 6 months), remember to recharge it regularly (to more than 30%).
If you do not follow these safety instructions, you risk causing serious damage to people or property, and you even risk causing a fire!
ATEQ accepts no responsibility in the event of damage arising as a result of non-compliance with these safety instructions.
Since the use of a Li-Po battery entails significant fire risks capable of causing serious damage to people and property, the user agrees to accept the risks and the responsibility involved. Since
ATEQ cannot control the correct use of the battery (charging, discharging, storage, etc.), it cannot be held responsible for damage caused to people or property.

FCC STATEMENTS
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation.

CE STATEMENTS DECLARATION OF CONFORMITY

The manufacturer of the TPMS TOOL declares that this device complies with the requirements of:
– ETSI EN 300 330-1 V1.8.1 (2015-03): Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 1: Technical characteristics and test methods.
– ETSI EN 300 330-2 V1.6.1 (2015-03): Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive.
BS EN 62479:2010: Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz).

RECYCLING

Do not dispose of the rechargeable Lithium-polymer battery or the tool and/or its accessories in the general waste.

These components must be collected and recycled.

The crossed-out wheeled waste bin means that the product must be taken to separate collection at the end of the product’s service life. This applies to your tool and also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste. For further information, please contact ATEQ

Quickset X

Documents / Resources

| ATEQ Quickset X TPMS Activation and ECU Reset Tool Includes OBD Cable [pdf] User Manual
Quickset X, TPMS Activation and ECU Reset Tool Includes OBD Cable
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>