Steel Gazebo MA-OB-HTG006 User Manual
- June 6, 2024
- Gazebo
Table of Contents
Assembly Instruction
MA-OB-HTG006
We are forever grateful and appreciative of you considering purchasing our product. After careful evaluation of our product series, we are excited to launch this product to the public as it is more technically advanced with lots of exciting and useful features. One of the great features added to the arsenal is its mere size, which will require 3-4 people with about 4-5 hours of installing time. Making it a beast at its finest!
Steel Gazebo Assembly Instructions
STEP 2: Attach Crossbeams 1 (Part B) and Crossbeams 4 (Part C1) to Pillars (Part A) . Attach Support Brackets ( Part F and F1) to Crossbeam and Pillar. Attach Crossbeams 2 Part B1) and Crossbeams 3 (Part C) to Pillars (Part A). Attach Support Brackets (Parts F and F1) to Cross Beam and Pillar
STEP 3:Connect the Longer Crossbeams B and B1 using Crossbeam Connector (Part
P)
Note: After sliding the Crossbeam Connector (Part P) into a crossbeam you
should start one bolt to hold the Crossbeam Connector in place.
STEP 5-1: Attach the Corner Protectors (Part J1) and the Rib Supports (Part J2) Just twist the top two screws of (Part J2)
STEP 5-2
STEP 5-2: Slide 7 Netting
Hooks (Part Q) into Long Crossbeams (Parts B and B1). With the sections laying
on their side, Slide 5 Netting Hooks (Part Q) into Short Crossbeams (Parts C
and C1). Then Attach (Part M6)
Note: There are two tracks. You can choose either track to install Part Q
STEP 6: Assemble the Roof Frame by Attaching the Roof Ribs Long (Part E) to
the Roof Top Brace (Part K1).
STEP 7 : Lift the Partially assembled Roof onto the assembled Frame and attach.
STEP 8 : Attach the Roof Ribs Short (Part D) to the Roof Top Brace (Part K1). Attached is the Roof Ribs Short (Part D) to the assembled frame.
STEP 10: Attach the Clips (Part R1) and Clips (Part R) as shown in the diagram.
STEP 11：Install the Roof Plates (Part N6 N7 N8) on the Long Sides of the Gazebo. Install the Roof Plates (Part O5 O6) on the Short Sides of the Gazebo.
STEP 12：Tighten the screw (part U) halfway, then install(Part G G5 G6 G7), and finally tighten the (Part U)
STEP 13: Attach the Roof Supports (Part H H1 H2) to the roof frame using Connectors 1 (Part M3) and Connectors 2 (Part M4) as shown in the diagram
STEP 14:Part N1 N2 N3 N4 N5 for the Long Sides of the Gazebo, Part O1 O2 O3 O4
for the short Sides of the Gazebo.
Install the Roof Plates on the Long Sides of the Gazebo. Start by sliding
Roof Plate 1 (Part N2 N3 N4) into position. Then N1and N4. The same for the
other three sides.
Note: First fix 4 (Part M2) with V, but do not screw too tight, then install (Part G G1 G2 G3 and G4 )as shown in the diagram. You’d better from left to right. Attach the Center Rib Braces (PartM1) as shown in the diagram.
STEP 18: Install the Mosquito Netting as Shown in the diagram.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>