HYTRONIK Bluetooth Receiver Node – DALI Version Instruction Manual
- June 6, 2024
- HYTRONIK
Table of Contents
HYTRONIK Bluetooth Receiver Node – DALI Version Instruction Manual
Technical Specifications
Product type| 
DALI Digitial Receiver Node (Flush
mount)
---|---
Mains voltage| 220~240VAC 50/60Hz
Rated load| Max.100mA, 50 devices
Stand-by power| <0.5W
Operation frequency| 2.4 GHz – 2.483 GHz
Transmission power| 4 dBm
Range (Typical)| 10 ~ 30m
Protocol| 5.0 SIG Mesh
Operation temperature| Ta: -20°C ~ +45°C
Case temperature Max.)| Tc: +75°C
Storage temperature| -20°C ~ +60°C
Max. relative humidity| 20 ~ 90%
IP rating| IP20
Impulse withstand oltage| 2.5KV
Duty type| S1
Insulation material| PTI material group IIIa
Glow wire| level 3, 850°C
Protection| Built-in protection provide
Insulation| Class II Pollution degree 2
EMC standard (EMC)| EN55015, EN61547, EN61000-3-2, EN61000-3-3
Safety standard (LVD)| IEC 61058-1, EN 61058-1, IEC 61058-1-2 EN 61058-1-2,
AS/NZS 61058.1
Radio Equipment (RED)| EN300 328, EN301489-1, EN301489-17, EN62479
Download the App
Free App for set-up and commissioning
5.0 SIG mesh
Web app/platform:
iot.koolmesh.com
Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Detailed Push switch configurations can be set on Koolmesh app.
| Switch Function | Action | Descriptions |
|---|---|---|
| Push switch | Short press (<1 second) | |
| Short press has to be longer than 0.1s, or it will be invalid. | – Turn on/off |
– Recall a scene
– Turn on only – Exit manual mode
– Turn off only – Do nothing
Double push| – Turn on only – Exit manual mode
– Turn off only – Do nothing
– Recall a scene
Long press (≥1 second)| – Dimming
– Colour tuning
– Do nothing
Simulate sensor| /| – Upgrade a normal on/off motion sensor to a Bluetooth
controlled motion sensor
Installation
Warnings:
- Installation must be carried out by a qualified engineer in accordance with local regulations.
- Disconnect power supply before installing.
- Ensure environmental conditions are suitable for electronic equipment.
Wire Preparation
Wiring Diagram
Additional Information / Documents
- To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
- Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
- Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensor ->Receiver Nodes
- Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>