HONiTURE Q6 Robot Vacuum Cleaner Instructions
- June 6, 2024
- HONiTURE
Table of Contents
APP Instructions For HONITURE Q6
Connect to WiFi
① Download app: Scan the QR code with your mobile phone or search in Google Play Store (Android devices)/App Store (iOS devices) to download the Honysmart app.
http://www.honiture.com/honitureapp.html
② Sign up your account and log in.
③ Click “+” in the upper right corner on the page and choose Q6.
④ Enter the correct WiFi name and password then click “Continue”.
⑤ Press and hold the Power button for 3 seconds to turn on the robot. The
robot will say “Turn on”.
⑥ Press and hold the Power button and Recharge button at the same time for at
least 3 seconds, until you hear the robot saying “WiFi has been reset” and the
Power button flashes slowly in blue.
⑦ Click “Confirm power on key blue slow flash” and click “Next”
⑧ Click “Go to connect” and it will automatically jump to the setting page of
your mobile phone
⑨ Go to the WiFi setting page and find the “SmartLife-XXXX” hotspot network
and click to connect to it.
⑩ Return to the app and wait for the device adding to complete.
⑪ Click “Done” to complete the connection.
Four modes
① Cleaning Anywhere You Point: When the robot is standing by or paused, you
can specify a target point on the map in the app, and the robot will
automatically plan a route to the specified location and clean the surrounding
1.6m * 1.6m square area with itself as the center.
② Zone Cleaning: Click ”Create area” to create the zone yous want to clean
and the robot will clean the zones selected on the map.
③ Select room: You can set the Room Cleaning in the app, the robot will
clean the rooms you select. You also can select the suction.
④ Auto Cleaning: The robot will clean the whole house.
Virtual No-go area
①Set up virtual No-go area: In the Automatic Cleaning mode, click ‘Area” in
order to set up the no-go area. The robot will not enter the no-go area
(including cleaning mode and mopping mode.
Don’t set the No-go area near the charging pile.
Don’t forget to save them!
Partition editing
Please make sure that the robot vacuum has completed a cleaning, and the
map will be automatically generated on the app before you can edit it.
① Merge rooms: Select two adjacent and different colored areas to merge.
② Divide room: Select a single area split. Tap the screen and when a line
appears, move two points to divide the room.
More function:
Click ”More” firstly
① Schedule: You can add a schedule in the app to set your desired schedule/
frequency/ selected area (auto cleaning or select specified room cleaning).
② Remote Control: You can manually control the robot by pressing and holding the arrow keys. Spot mode is set here.
③ Find me: Click “Confirm” and Robot will say ” I’m here”
④ RE-Map
When the map is formed, it will be saved automatically. After saving, if you
want to redraw the map, you can use Re-Map.
⑤ Dust collecting
You can set the dust collecting mode of the dust collector here. There is 4
mode to choose from.
If you choose “never work”, you need to click “Begin to dust” to collect the
dust manually.
⑥ Voice Language and Volume
You can adjust the volume and download the language of the voice.
⑦ Record
You can view the cleaning records. You also can restore the map when it’s
formed.
⑧ Silent Mode
You can select the Silent Mode and the start and end time of the mode.
Maintenance
You can check the usage of consumables here.
⑩ More info
If the robot fails, you can check the virtual ID here and tell the after-sales
service if needed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>