FoxESS WiFi Stick 2.0 Intelligent Enabled Device User Manual
- June 6, 2024
- FoxESS
Table of Contents
WiFi Stick User Manual
& Installation Guide
WiFi Stick Installation
STEP 1 >
Plug the WiFi stick into the WiFi/GPRS port located at the bottom (underside)
of the inverter and make sure it is fully tightened.
STEP 2 >
Power on the inverter (in accordance with the start-up procedure detailed in
the product installation manual).
App Installation
STEP 1 >
Scan the QR Code below to download and install the App on your smartphone. You
will be presented with the option to choose between Android or IOS as
appropriate.
http://pv.inteless.com/app/download
Sign up for an account
STEP 1 >
Open the App, click `Sign Up’ , enter your personal information and click
CONFIRM to complete the registration process.
Create a plant
STEP 1 >
Open the App.
STEP 2 >
Click the +’ icon on the homepage and, when prompted, scan the QR code label located on the side of the WiFi stick. Some basic information for this plant will populate automatically. Fill in any vacant fields and clickdone’ (for
capacity, simply enter the size of your PV array e.g. 5kW).
WLAN configuration
FOR ANDROID
STEP 1 >
Open the App
STEP 2 >
Navigate to `Me’, click `Tools’ , click `Find Device’. The
Inverter SSID will appear on the list, select your inverter network (starting
with the letters `EAP’) and connect to it.
STEP 3 >
Select your home WiFi network SSID, then enter your home router WiFi’s
password when prompted to establish a connection between your home WiFi
network and the inverter WiFi network.
FOR IOS
STEP 1 >
Open the App
STEP 2 >
Navigate to `Me’ click on `Tools’, click `Find Device’ and click
`Setting’, the WLAN setting page will load on your iPhone. Select the
inverter network starting with the letters `EAP’, enter password 12345678, and
connect to it.
STEP 3 >
Within the App, click ‘Setting’ again and this time choose your home WiFi
network, enter your home router WiFi password to establish a connection
between your home WiFi and the inverter WiFi.
App Introduction
Open the App and click `My plant’; the user can monitor detailed information about this plant such as real-time power, accumulated power, monthly yield, daily yield, alarm, etc.
How to add more devices
If the user wants to add more than one device under this plant, please enter the plant, choose `device’, and click on the icon to scan the QR code of each additional device.
How to share a plant
Users can share a plant by long-pressing for approximately 3 seconds on your
plant entry and clicking ’share’
Note: Only those who have already downloaded this App and registered for
an account can view the shared plant.
