FoxESS SMART LAN Device User Guide

Table of Contents

Step 1:
Smart LAN consist by three parts. Insert the Internet cable into the nuts on the bottom, and then make the Rj45 Port for the wiring as below. Tighten the components.
Step 2:
Rotate the lock, make sure the triangle logo is on the front and centered.
Plug the Smart LAN into the LAN port under the bottom (underside) of the inverter. Tighten the nut clockwise as following.

Scan the QR Code below to download and install FoxCloud APP on your smartphone or tablet.

FoxESS-SMART-LAN-Device-3

For Installer
Via Smartphone

Step 1:
Please click ‘Register’, enter installer’s information and click ‘Next’ to complete the installer account registration.
Note: If you already have an installer/agent account, please press ‘Login’ and enter with your installer/agent account directly.
Step 2:
Select ‘Installer’ and enter Installer name, then click ‘OK’.
We suggest that you ﬁll in the relevant optional information to ensure after- sales service.
Note: Installer: The installer.
Agent: The agent/distributor/installation company.

Via Computer

Step 1:
Open any browser and enter
‘foxesscloud.com’ on the address bar on top, click ‘Sign up’.
Note: If you already have an installer/agent account, please press ‘Sign in’ and enter with your installer/agent account directly.
Step 2:
Click ‘Installer’ and enter information then click ‘Next’ to complete account registration. Note: ‘*’ is required to be ﬁlled in.

For End User
Via Smartphone

Step 1:
Please click ‘Register’, enter end user’s information and click ‘Next’ to complete the end user account registration.
Step 2:
Select ‘End user’ then scan the LAN bar code on the Smart LAN, and click ‘OK’.
We suggest that you ﬁll in the relevant optional information to ensure after- sales service.

Via Computer

Step 1:
Please select ‘User’ then input all required information, and click ‘Next’ to complete account registration.

For Installer
Via Smartphone

Step 1:
O pen the APP, login with your In staller/agent account.
Step 2:
Press the ‘+’ icon on the homepage to add plant. Press the scan icon next to the ‘Device list’ to scan the QR code label on the side of the Smart LAN.
Note: After starting the APP, it will pop-up a message ‘Whether to allow positioning permissions’, please select ‘Allow’. For the capacity, please ﬁll in the actual capacity of the installed solar panels.

FoxESS-SMART-LAN-Device-12

Via Computer
Press the ‘New’ on the homepage to add plant. Complete all required information and click ‘Create’.

FoxESS-SMART-LAN-Device-13

For End User
Via Smartphone

Step 1:
Open the APP, login with y our end user account.
Step 2:
Press the ‘+’ icon on the homepage to add plant. Press the scan icon next to the ‘Device list’ to scan the QR code label on the side of the Smart LAN.
Note: After starting the APP, it will pop-up a message ‘Whether to allow positioning permissions’, please select ‘Allow’. For the capacity, please ﬁll in the actual capacity of the installed solar panels.
Note: If SN has been bound to the plant already, APP will jump to the beside page. If SN has not been bound before, please refer to step 3.
Step 3:
After scanning code successfully, click ‘OK’ on the top right corner of the page, APP will pop-up a message ‘Add device’, please click ‘OK’. Complete all required information and click ‘OK’ on the top right corner of the page.

Via Computer

Step 1:
Click ‘Associate SN’, input SN and click ‘Create’. Note: ‘*’ is required to be ﬁlled in.

Note: If SN has been bound to the plant already, website will jump to the following page. If the SN has not been bound before, please refer to step 2.
Step 2: It will pop-up a ‘Tip’, please click ‘Conﬁrm’. Complete all required information and click ‘Create’.