TOPLANET B08CRJXLLS Sleep Headphones Bluetooth 3D Eye Mask User Guide

SLEEP HEADPHONES
BLUETOOTH 3D EYE MASK

PACKING LIST

• Sleep headphone Bluetooth eye mask*1
• User manual*1
• USB charging cable*1
• Portable travel bag*1

PRODUCT SPECIFICATION

| Charging time 2-2.5 hours ( please charge it before use )
---|---
| Playing time: more than 12 Hours
| Power/Hands-free Calling / Stop / Play
| Vol Up/Next/1 or 2 Hours Auto Shutdown
| Vol Down/Previous

HOW TO CONNECT BLUETOOTH

1. Turn Bluetooth off when you’re not using it.
2. Long press the “on/off” button until red/blue light flash.
3. Turn on Bluetooth with your phone, find device name “BT-FAAH” then connect.
4. You can enjoy music after a Bluetooth connection.

Note: Bluetooth devices can only be paired on a one-to-one basis, make sure disconnected with the previous Bluetooth device when connecting a new device.

WASHABLE SLEEP MASK

Music sleep masks can be washable. ( hidden headphones can be taken out from the sleep mask)
Hand washing in warm water is recommended.

OPERATING INSTRUCTION

1. Press once PLAY / STOP button to start playing, press once again to stop playing.
2. Press Vol- for the previous song.
3. Press Vol+ for the next song.
4. Long press Vol – will constantly reduce the volume to the minimum.
5. Long press Vol+ will constantly increase volume to the max.

Note: The headphone defaults to Long Play Mode when power on.

Timer & Automatic Shutdown

1. Double click the Vol+ button for the first time, the voice prompt says “power off one hour later”. Then after one hour of work, the machine will turn off automatically.
2. Double click the Vol+ button for the second time, the voice prompt says “power off two hours later”. Then after two hours of work, the machine will turn off automatically.
3. Double click the Vol+ button for the third time, the voice prompt says“long play” and the machine will not shut down automatically.
4. The above three timing modes cycle in turn.
5. Each time the machine is turned on, the default is not automatically to turn off the machine.

BLUETOOTH HANDS-FREE CALLING

You can press the PLAY/STOP button to answer the phone for an incoming call.
You can press the PLAY/STOP button for 3 seconds to reject the phone for incoming calls.
During the phone call, you can press the PLAY / STOP button for 3 seconds to switch back to earphones.

CHARGING FUNCTION

Use a USB cable to connect the headphone to a USB charger or your computer USB port (Micro USB to USB Cable included). There is a notification LED light in our device,  constant RED light shows that device is charging, Red light change into blue light mean fully charged. ( Note: There is a hidden charging port in the sleeping headphone that  you can use conveniently )

NOTE:

1. Make sure the Bluetooth is opening in your phone and find device name“BT-FAAH” and connect.
2. Please take out the Bluetooth headphone before you wash them.
3. Bluetooth speakers could be adjustable for all head sizes.
4. Please check the USB cable if the headphone can’t be charged.
5. Please adjust the volume from your mobile or long-press Vol+ if you can’t hear any sound.
6. The sound may have a bit of noise if there’s environmental interference.
7. 18-month warranty and quick response & friendly customer service. if you have any questions when using, feel free to contact us via Amazon email or our service email:  toplanet@tom.com. 

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>