NITECORE P10 V2 Strobe Ready Ultra Compact Tactical Flashlight User Guide
- June 6, 2024
- Nitecore
Table of Contents
P10 V2
STROBE READY™
Ultra-Compact Tactical Flashlight
- 3 User Modes Selectable
- Patented Power Indicator
- Anti-Impact Reverse Polarity Protection
Warranty Service
All NITECORE® products are warranted for quality. Any DOA /defective product
can be exchanged for a replacement through a local distributor/dealer within
15 days of purchase. After that, all defective/malfunctioning NITECORE®
products can be repaired free of charge within 60 months from the date of
purchase. Beyond 60 months, a limited warranty applies, covering the cost of
labor and maintenance, but not the cost of accessories or replacement parts.
The warranty will be nullified if
- the product(s) is/are broken down, reconstructed, and/or modified by unauthorized parties;
- the product(s) is/are damaged due to improper use; (e.g. reversed polarity installation)
- the product(s) is/are damaged due to battery leakage.
For the latest information on NITECORE® products and services, please contact
a local NITECORE® distributor or send an email to [email protected]
All images, text, and statements specified herein in this user manual are for
reference purposes only. Should any discrepancy occur between this manual and
information specified on www.nitecore.com, Sysmax Innovations Co., Ltd.
reserves the right to interpret and amend the content of this document at any
time without prior notice.
Features
- Utilizes a CREE XP-L2 V6 LED with a max output of 1,100 lumens
- Maximum beam intensity of 10,150cd and maximum throw of 201 meters
- An optical system combined with crystal coating and “Precision Digital Optics Technology” (PDOT)
- Highly efficient constant current circuit provides a stable output for up to 55 hours
- Dual tail switches enable intuitive operations for tactical applications
- STROBE READY™ Technology to enable quick access to STROBE Mode (Patent No.: ZL201320545349.4)
- 3 user modes are available and easily selectable
- The power indicator on the tail cap indicates the remaining battery power (Patent No. ZL201220057767.4)
- Anti-impact reverse polarity protection mechanism specially designed for shooting sports (Patent No. ZL201220677948.7)
- Stainless steel clip with titanium coating included
- Optical lenses with double-sided scratch-resistant coating
- Constructed from aero grade aluminum alloy
- HA III military grade hard-anodized finish
- Rating in accordance with IP68 (2 meters submersible)
- Impact-resistant to 1 meter
Specifications
Length: 148.3mm (5.84”)
Head Diameter: 25.4mm (1”)
Tube Diameter: 25.4mm (1”)
Tail Diameter: 26mm (1.02”)
Weight: 95g (3.35oz)
Accessories
Tactical Holster NTH10, Clip, Lanyard, Spare O-ring, CR123 Battery Magazine
Battery Options
| Type| Nominal Voltage| Compatibility
---|---|---|---
18650 Rechargeable Li-ion
Battery (Button-topped)| 18650| 3.6V/3.7V| Y (Recommended)
Primary Lithium Battery| CR123| 3V| Y (Recommended)
Rechargeable Li-ion
Battery| RCR123| 3.6V/3.7V| Y (Compatible)
18650 Rechargeable Li-ion
Battery (Flat-topped)| 18650| —| N (Incompatible)
Technical Data
Using a 18650 Li-ion Battery:
FL1 STANDARD
| HIGH| MID| LOW|
STROBE
---|---|---|---|---
(Mode 3)
|
(Mode 2)
| 1,000
Lumens| 370
Lumens| 200
Lumens| 60
Lumens| 1,000
Lumens
| 3h| 7h| 18h| 55h| —
| 198m| 115m| 87m| 49m| —
| 9,780cd| 3,300cd| 1,800cd| 610cd| —
| lm (Impact Resistance)
| IP68, 2m (Waterproof and Submersible)
Note: The stated data is measured in accordance with the international flashlight testing standards ANSI/PLATO FL1-2019, using a 1 x 18650 Li-ion battery (3,500mAh) under laboratory conditions. The data may vary in real- world use due to different battery usage or environmental conditions.
Using 2 x CR123 Batteries:
FL1 STANDARD
| HIGH| MID| LOW|
STROBE
---|---|---|---|---
(Mode 3)
|
(Mode 2)
| 1,100
Lumens| 370
Lumens| 200
Lumens| 60
Lumens| 1,000
Lumens
| 1h| 2h| 3h| 14h| —
| 201m| 115m| 87m| 49m| —
| 10,150cd| 3,300cd| 1,800cd| 610cd| —
| lm (Impact Resistance)
| IP68, 2m (Waterproof and Submersible)
Note: The stated data is measured in accordance with the international flashlight testing standards ANSI/PLATO FL1-2019, using 2 x CR123 batteries (approx. 1,700mAh in total) under laboratory conditions. The data may vary in real-world use due to different battery usage or environmental conditions.
Battery Installation
Battery Installation
Insert the battery(s) as illustrated and screw to tighten the tail cap.
Note: After the battery insertion, the power indicator beside the tail
switches will flash to indicate the remaining power. Please refer to the
“Power Indication” section of this manual for more details.
Warnings:
- Ensure the battery(s) is/are inserted with the positive end towards the head. The product will not work if the battery(s) is/are incorrectly inserted.
- Please use the battery magazine when using 2 x CR123 batteries to avoid battery rattling and to ensure stable contact.
- CAUTION! Possible dangerous radiation! Don’t look into the light! Maybe dangerous for your eyes.
- When the power level is low, please stop using the product and replace or recharge the battery to prevent damage to the battery.
- When the product is kept in a backpack or left unused for a prolonged time, please remove all batteries to prevent accidental activation or battery leakage.
Tactical Momentary Illumination
Half-press and hold the Power Button to turn on the light momentarily.
Release to turn it off.
On / Off
On: When the light is off, press the Power Button until a click sound is heard
to turn it on.
Off: When the light is on, press the Power Button until a click sound is heard
to turn it off.
User Mode Selection
The P10 V2 provides 3 user modes for different users and situations.
- Tactical Mode (Mode 1): In this user mode, only HIGH Level and STROBE Mode are available. It will automatically access HIGH when reactivated.
- Law Enforcement Mode (Mode 2): In this user mode, there are only 2 brightness levels (MID of 200 Lumens and HIGH) and STROBE Mode available. It will automatically access HIGH when reactivated. When the light is on, short press the Mode Button (STROBE READYTM) to switch between HIGH and MID.
- Daily Mode (Mode 3, Default Setting): In this user mode, there are 3 brightness levels (LOW, MID of 370 Lumens and HIGH) and STROBE Mode available. When the light is on, short press the Mode Button (STROBE READYTM) to cycle through the following brightness levels: LOW — MID — HIGH. The P10 V2 will memorize and re-access any of the 3 brightness levels or STROBE Mode when reactivated.
Note: The P10 V2 will automatically lower its output to avoid overheating and prolong the lifespan of the battery when accessing the HIGH or MID Level for over 2.5 minutes.
To select the desired user mode:
- Ensure the light is turned off.
- Loosen the tail cap.
- Keep holding the Mode Button (STROBE READY™) on the tail cap while simultaneously tightening the tail cap.
- Once the tail cap has been tightened, the LED will indicate a user-mode selected by flashing once for Tactical Mode, flashing twice for Law Enforcement Mode and flashing three times for Daily Mode.
- To cycle through all 3 user modes, please repeat the above procedures.
STROBE READY™
-
When the light is off in any user mode, press and hold the Mode Button (STROBE READY™) to access the STROBE Mode. Release to turn it off.
-
Tactical Mode:
When the light is on, short press the Mode Button (STROBE READY™) to access the STROBE Mode. Short press the Mode Button (STROBE READY™) again to return to HIGH. -
Law Enforcement Mode & Daily Mode:
When the light is on, long-press the Mode Button (STROBE READY™) to access the STROBE Mode. Short press the Mode Button (STROBE READY™) again to return to the previous brightness level.
Power Indication
When the battery is inserted, the power indicator located on the tail cap will flash to indicate the remaining power of the batteries:
- Flashing three times indicates that the power is above 50%;
- Flashing twice indicates that the power is below 50%;
- Flashing once indicates that the power is near depletion.
NOTE: As a precise power reading is required, please ensure the P10 V2 is powered down for at least 20 seconds before tightening the tail cap for this function.
Changing Batteries
The batteries should be replaced when the output appears to be dim or the flashlight becomes unresponsive due to low power.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicone-based lubricant.
SYSMAX Innovations Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: [email protected]
Web: www.nitecore.com
Address： Rm 2601-06, Central Tower, No.5 Xiancun Road, Tianhe District,
Guangzhou, 510623, Guangdong, China
**Made in
China
Please find us on Facebook: NITECORE Flashlight
Thanks for purchasing NITECORE!
P290410V220**