devolo 8786 Magic 2 WiFi Next Starter Kit Installation Guide
- June 6, 2024
- devolo
Table of Contents
devolo 8786 Magic 2 WiFi Next Starter Kit
Damage to the device from the environment. High-temperature fluctuations and
moisture can damage both the product and the power line.
The device is for indoor use and in dry conditions only.
Set up, change and monitor: the intuitive devolo Home Network App for controlling devolo Magic adapters.
Instructions
Write down the Wi-Fi key provided on the back of the devolo Magic
adapter.
Plug the devolo Magic WiFi adapter into an available wall outlet and wait
until the LED quickly flashes white (approx. 1
minute).
Plug the second devolo Magic adapter into the outlet and connect it to your
router using the LAN cable included.
Caution
Tripping hazard from connected network cables. Tripping over the network
cable can cause minor injuries and bruises. Lay the network cable with
accessibility in mind. Ensure that the power outlet and all connected network
devices are easily accessible. Ethernet cable (Cat.5e UTP) not for in-wall
use.
The encryption process happens automatically. During this time, the LEDs on
both adapters flash white.
The process is finished when the LEDs on all the devices turn solid white. The
process takes a maximum of 3 minutes.
Set up the Wi-Fi connection on your smartphone or other smart device. The
basic installation process is complete. You now have the option to use Mesh
technology to connect all devolo Magic adapters and your router to a
contiguous network and connect seamlessly to the Internet with a strong
connection throughout the house.
Optional Mesh Technology
To do this, the Wi-Fi access data is transferred once from the router to the
devolo Magic WiFi adapter at the push of a button. This gives you Wi-Fi
coverage where you need it.
For the initial setup, plug the devolo Magic WiFi adapter into an available
wall outlet near your router (no more than 33 ft away) and wait about 1 minute
until the LED lights up white.
Briefly press the button on your devolo Magic WiFi adapter. After the button
is pressed, the LED flashes white. Press the WPS button on your router within
2 minutes. Please consult your router‘s manual to find out how long to press
the button for.
When the LED lights up solid white, the process has completed
successfully.
You can now disconnect your devolo Magic WiFi adapter and move it to another
preferred location.
Done! devolo Magic adapters get you seamlessly onto the Internet with a strong
connection.
PLC button
WiFi button
Help: Manual pairing
Help: If automatic pairing during initial installation was unsuccessful,
you can pair the Magic adapters manually. Plug the devolo Magic adapter into
an available wall outlet and wait until the LED flashes white (approx. 1
minute).
Within 3 minutes, press the button on the side of your devolo Magic LAN
adapter, which is connected to the router. Then press the button on your
plugged-in devolo Magic WiFi adapter. When all of the LEDs light up white,
pairing has been completed successfully.
Limited Warranty: 2 years
If your devolo device is found to be defective during initial installation or within the warranty period, please contact the store where you purchased the product. The store will take care of the repair or warranty claim for you. The complete limited warranty conditions can be found at www.devolo.com/support/warranty.
Support
- United States of America: www.devolo.com/support
- Canada: www.devolo.com/support
devolo AG · Charlottenburger Allee 67 · 52068 Aachen · Germany devolo.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>