devolo Giga Bridge Telefon Set Installation Guide
- June 6, 2024
- devolo
Table of Contents
devolo Giga Bridge Telefon Set Installation
Installation
The devolo Giga Bridge is only suitable to be used with telephone and coaxial
lines inside buildings.
The use of telephone and coaxial lines outside of buildings may negatively aff
ect conformity and cause the warranty claims to become void
- Connect both devolo Giga Bridge adapters to an available power socket. The LEDs of both adapters fl ash white. A new devolo Giga Bridge network is automatically set up (pairing).
- onnect one end of the provided network cable to the G.hn phone line socket (phone) on one of the devolo Giga Bridge adapters. Connect the other end of the provided network cable to the G.hn phone line socket (phone) of the other devolo Giga Bridge adapter.
The devolo Giga Bridge uses G.hn technology for the transmission of the
Internet signal over coaxial (TV/SAT) or telephone line. In scenario “a”, the
G.hn signal is transmitted over two or four telephone wires or in scenario “b”
via standard coaxial cable
The telephone cable is removed from the demarcation point and then split and
contacted by mans of connection technology involving wire stripping and
soldering or screwing down. A standard network interface is created as a
result. Note the correct pin assignment: Pin 4/5 for SISO; Pin 4/5 and 3/6 for
Connect the adapter of the devolo Giga Bridge using the telephone line (G.hn
phone line socket, phone) to a connection already in the wall. Connect the
adapter of the devolo Giga Bridge using the provided network cable with the
NT/ONT.MIMO.
Connect the devolo Giga Bridge adapter using the provided network cable to the
WAN (Wide Area Network) port of the router. Connect the adapter of the devolo
Giga Bridge over the telephone line (G.hn phone line socket, phone) to a
connection already available in the wall
Connect the end of the coaxial cable to the coaxial socket (coax) on one
of the devolo Giga Bridge adapters. Connect the adapter of the devolo Giga Bridge using the provided network cable with the NT/ONTConnect the devolo Giga Bridge adapter using the provided network cable to the WAN (Wide Area Network) port of the router. Connect the devolo Giga Bridge adapter using the F-type connection (coaxial cable) to an existing connection.Support
Deutschland| www.devolo.de/service|
---|---|---
Österreich| www.devolo.at/service|
Schweiz/Suisse/Svizzera|
www.devolo.ch/service|
www.devolo.ch/fr/service
Great Britain| www.devolo.co.uk/service|
France| www.devolo.fr/support|
Italia| www.devolo.it/supporto|
Espana| www.devolo.es/servicios|
Portugal| www.devolo.pt/suporte|
Nederlands| www.devolo.nl/service|
Belgien/Belgique/Belgie|
www.devolo.be/service|
www.devolo.be/fr/service
Sweden| www.devolo.se/support|
Other countries|
www.devolo.global/support|
Warranty: 3 years
If your devolo device is found to be defective during initial installation or within the warranty period, please contact the vendor who sold you the product. The vendor will take care of the repair or warranty claim for you. The complete warranty conditions can be found at www.devolo.global/warranty.
References
- Support zu Fragen rund um devolo Produkte | devolo
- Support - devolo
- Support & Contact | devolo
- Support - devolo
- Support zu Fragen rund um devolo Produkte | devolo
- Support & Contact | devolo
- Support zu Fragen rund um devolo Produkte | devolo
- Support | devolo
- Assistance téléphonique et support | devolo
- Support & Contact | devolo
- Suporte - devolo
- Internet anywhere – devolo cures weak Wi-Fi | devolo