devolo Magic 2 WiFi 6 Powerline Adapter Installation Guide
- June 6, 2024
- devolo
Table of Contents
devolo Magic 2 WiFi 6 Powerline Adapter
Information
Installation via App
Download the devolo Home Network app. An installation wizard will take you through the configuration step-by-step. If you prefer to carry out the installation without the app, follow the steps in Part B.
Make a note of the Wi-Fi key on the back of the devolo Magic adapter. On the back of this flyer you can use the field reserved for this purpose.
Connect the devolo Magic WiFi adapter to a free wall socket and wait until the LED quickly flashes white (approx. 1 minute).
Within 2 minutes, connect the second devolo Magic adapter to the socket and connect it to your router using the enclosed LAN cable.
The encryption process takes place automatically. During this time, the LEDs of both adapters flash white.
The process is complete as soon as all of the LEDs on the devices light up solid white. The process takes a maxi-mum of 3 minutes.
Set up the Wi-Fi connection on your smartphone, etc. The basic installation process is complete. Optionally, you can then use Mesh technology to connect all devolo Magic adapters and your router to a contiguous network and connect seamlessly to the Internet with the strongest possible connection anywhere in the house.
To do this, the Wi-Fi access data is transferred as a one-off to the devolo Magic WiFi adapter at the press of a button. This gives you the best Wi-Fi coverage in any room. If the devolo Magic WiFi Adapter is already near your router (max. distance 10 metres), continue with step B9, otherwise with B8.
Connect the devolo Magic WiFi adapter for the transmission of the Wi-Fi access data to a free wall socket near your router (max. distance 10 metres) and wait around 1 minute until the LED lights up white.
Briefly press the button on your devolo Magic WiFi adapter. After the button is pressed, the LED flashes white. Press the WPS button on your router within 2 minutes. Please consult your router‘s instruction for use to find out how long to press the button for.
Once the LED lights up solid white, the process has been completed successfully.
You can now disconnect your devolo Magic WiFi adapter and place it in your preferred location. Done! devolo Magic adapters get you seamlessly onto the Internet anywhere in the house with the strongest possible connection.
Help: If automatic pairing during initial installation was unsuccessful, you can carry out the manual pairing of the Magic adapters. Connect the devolo Magic adapter to a free wall socket and wait until the LED flashes white (approx. 1 minute).
Within 3 minutes, press the button on the side of your devolo Magic LAN adapter which is connected to the router. Press the button on your plugged-in devolo Magic WiFi adapter. As soon as all of the LEDs light up white, pairing has been completed successfully.
Support
Manual
www.devolo.global/support/downloads
WiFi Key:
devolo AG · Charlottenburger Allee 67 · 52068 Aachen · Germany
www.devolo.global